From: Elad Nachman <enachman@xxxxxxxxxxx>
Add support for CN9130 and CN9131 COM Express Type 7 CPU
module boards by Marvell.
Define these COM Express CPU modules as dtsi, and
provide a dts file for a carrier board (Marvell AC5X RD
COM Express type 7 carrier board).
This Carrier board only utilizes the PCIe link, hence no
special device / driver support is provided by this dts file.
v3:
1) Remove acronym which creates warnings for checkpatch.pl
2) Correct compatibility string for ac5x rd board
3) Add above compatibility string to dt bindings
4) update MAINTAINERS file with ac5 series dts files
5) remove memory property from carrier dts
6) add comment explaining that OOB RGMII ethernet port
connector and PHY are both on CPU module
v2:
1) add compatibility string for the board
2) remove unneeded hard-coded PHY LED blinking mode initialization
3) Split the CPU portion of the carrier board to
dtsi files, and define a dts file for the AC5X RD
carrier board.
Elad Nachman (3):
arm64: dts: cn913x: add device trees for COM Express boards
dt-bindings: arm64: dts: add dt-bindings for ac5x rd carrier
MAINTAINERS: add ac5 to list of maintained Marvell dts files
.../bindings/arm/marvell/armada-7k-8k.yaml | 8 ++
MAINTAINERS | 1 +
arch/arm64/boot/dts/marvell/Makefile | 1 +
.../boot/dts/marvell/ac5x_rd_carrier.dts | 23 ++++
.../dts/marvell/cn9130-db-comexpress.dtsi | 101 ++++++++++++++++
.../dts/marvell/cn9131-db-comexpress.dtsi | 113 ++++++++++++++++++
6 files changed, 247 insertions(+)
create mode 100644 arch/arm64/boot/dts/marvell/ac5x_rd_carrier.dts
create mode 100644 arch/arm64/boot/dts/marvell/cn9130-db-comexpress.dtsi
create mode 100644 arch/arm64/boot/dts/marvell/cn9131-db-comexpress.dtsi
--
2.25.1
