[PATCH v2 1/2] dt-bindings: iio: adc: adding dt-bindings for PAC193X

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Marius Cristea <marius.cristea@xxxxxxxxxxxxx>

This is the device tree schema for iio driver for
Microchip PAC193X series of Power Monitors with Accumulator.

Signed-off-by: Marius Cristea <marius.cristea@xxxxxxxxxxxxx>
---
 .../bindings/iio/adc/microchip,pac1934.yaml   | 146 ++++++++++++++++++
 1 file changed, 146 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/adc/microchip,pac1934.yaml

diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,pac1934.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,pac1934.yaml
new file mode 100644
index 000000000000..837053ed8a71
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/microchip,pac1934.yaml
@@ -0,0 +1,146 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/microchip,pac1934.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip PAC1934 Power Monitors with Accumulator
+
+maintainers:
+  - Marius Cristea <marius.cristea@xxxxxxxxxxxxx>
+
+description: |
+  Bindings for the Microchip family of Power Monitors with Accumulator.
+  The datasheet for PAC1931, PAC1932, PAC1933 and PAC1934 can be found here:
+    https://ww1.microchip.com/downloads/aemDocuments/documents/OTH/ProductDocuments/DataSheets/PAC1931-Family-Data-Sheet-DS20005850E.pdf
+
+properties:
+  compatible:
+    enum:
+      - microchip,pac1931
+      - microchip,pac1932
+      - microchip,pac1933
+      - microchip,pac1934
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  interrupts:
+    description: IRQ line of the ADC
+    maxItems: 1
+
+  drive-open-drain:
+    description: The IRQ signal is configured as open-drain.
+    type: boolean
+    maxItems: 1
+
+  microchip,slow-io:
+    type: boolean
+    description: |
+      A GPIO used to trigger a change is sampling rate (lowering the chip power consumption).
+      In default mode, if this pin is forced high, sampling rate is forced to eight
+      samples/second. When it is forced low, the sampling rate is 1024 samples/second unless
+      a different sample rate has been programmed.
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+patternProperties:
+  "^channel@[1-4]+$":
+    type: object
+    $ref: adc.yaml
+    description: Represents the external channels which are connected to the ADC.
+
+    properties:
+      reg:
+        description: |
+          The channel number.
+          It can have up to 4 channels, numbered from 1 to 4.
+        items:
+          - minimum: 1
+            maximum: 4
+
+      shunt-resistor-micro-ohms:
+        description: |
+          Value in micro Ohms of the shunt resistor connected between
+          the SENSE+ and SENSE- inputs, across which the current is measured. Value
+          is needed to compute the scaling of the measured current.
+
+      label:
+        $ref: /schemas/types.yaml#/definitions/string
+        description: Name of the monitored power rail.
+
+      bipolar:
+        description: Whether the channel is bi-directional.
+        type: boolean
+
+    required:
+      - reg
+      - shunt-resistor-micro-ohms
+
+    additionalProperties: false
+
+allOf:
+  - if:
+      required:
+        - interrupts
+    then:
+      required:
+        - drive-open-drain
+    else:
+      properties:
+        drive-open-drain: false
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pac193x: pac193x@10 {
+            compatible = "microchip,pac1934";
+            reg = <0x10>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            channel@1 {
+                reg = <0x1>;
+                shunt-resistor-micro-ohms = <24900000>;
+                label = "CPU";
+            };
+
+            channel@2 {
+                reg = <0x2>;
+                shunt-resistor-micro-ohms = <49900000>;
+                label = "GPU";
+            };
+
+            channel@3 {
+                reg = <0x3>;
+                shunt-resistor-micro-ohms = <75000000>;
+                label = "MEM";
+                bipolar;
+            };
+
+            channel@4 {
+                reg = <0x4>;
+                shunt-resistor-micro-ohms = <100000000>;
+                label = "NET";
+                bipolar;
+            };
+        };
+    };
+
+...
-- 
2.34.1





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux