The default for the QCM2290 platform that this board is based on is OTG
mode, however the role detection logic is not hooked up for this board
and the dwc3 driver is configured to not allow role switching from
userspace.
Force this board to host mode as this is the preferred usecase until we
get role switching hooked up.
Fixes: e18771961336 ("arm64: dts: qcom: Add initial QTI RB1 device tree")
Signed-off-by: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
---
base-commit: 05d3ef8bba77c1b5f98d941d8b2d4aeab8118ef1
// Caleb (they/them)
---
arch/arm64/boot/dts/qcom/qrb2210-rb1.dts | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts
index eadba066972e..f1961a07c9a3 100644
--- a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts
+++ b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts
@@ -366,6 +366,10 @@ &usb {
status = "okay";
};
+&usb_dwc3 {
+ dr_mode = "host";
+};
+
&usb_hsphy {
vdd-supply = <&pm2250_l12>;
vdda-pll-supply = <&pm2250_l13>;
