[PATCH v3 2/7] regulator: Handle system-critical under-voltage events

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Introduce handling for system-critical regulators during under-voltage
events.
A new field 'system_critical' in regulation_constraints is added to mark
regulators critical to system stability or functionality. During an
under-voltage event, if the regulator is marked as system-critical, an
emergency hardware protection shutdown is triggered to prevent potential
system damage or malfunction.

Signed-off-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
---
 drivers/regulator/core.c          | 6 ++++++
 drivers/regulator/of_regulator.c  | 2 ++
 include/linux/regulator/machine.h | 6 ++++++
 3 files changed, 14 insertions(+)

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index d8e1caaf207e..903c384f25e3 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -19,6 +19,7 @@
 #include <linux/delay.h>
 #include <linux/gpio/consumer.h>
 #include <linux/of.h>
+#include <linux/reboot.h>
 #include <linux/regmap.h>
 #include <linux/regulator/of_regulator.h>
 #include <linux/regulator/consumer.h>
@@ -5073,6 +5074,11 @@ EXPORT_SYMBOL_GPL(regulator_bulk_free);
 int regulator_notifier_call_chain(struct regulator_dev *rdev,
 				  unsigned long event, void *data)
 {
+	if (rdev->constraints->system_critical &&
+	    event == REGULATOR_EVENT_UNDER_VOLTAGE)
+		hw_protection_shutdown("System critical voltage drop detected",
+				       REGULATOR_DEF_EMERG_SHUTDWN_TMO);
+
 	_notifier_call_chain(rdev, event, data);
 	return NOTIFY_DONE;
 
diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c
index 1b65e5e4e40f..3bdd6f1919a4 100644
--- a/drivers/regulator/of_regulator.c
+++ b/drivers/regulator/of_regulator.c
@@ -131,6 +131,8 @@ static int of_get_regulation_constraints(struct device *dev,
 		constraints->valid_ops_mask |= REGULATOR_CHANGE_STATUS;
 
 	constraints->pull_down = of_property_read_bool(np, "regulator-pull-down");
+	constraints->system_critical = of_property_read_bool(np,
+						"system-critical-regulator");
 
 	if (of_property_read_bool(np, "regulator-allow-bypass"))
 		constraints->valid_ops_mask |= REGULATOR_CHANGE_BYPASS;
diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h
index 621b7f4a3639..7332ee36e9d6 100644
--- a/include/linux/regulator/machine.h
+++ b/include/linux/regulator/machine.h
@@ -49,6 +49,9 @@ struct regulator;
 #define DISABLE_IN_SUSPEND	1
 #define ENABLE_IN_SUSPEND	2
 
+/* Default time in millisecond to wait for emergency shutdown */
+#define REGULATOR_DEF_EMERG_SHUTDWN_TMO	10
+
 /* Regulator active discharge flags */
 enum regulator_active_discharge {
 	REGULATOR_ACTIVE_DISCHARGE_DEFAULT,
@@ -127,6 +130,8 @@ struct notification_limit {
  * @ramp_disable: Disable ramp delay when initialising or when setting voltage.
  * @soft_start: Enable soft start so that voltage ramps slowly.
  * @pull_down: Enable pull down when regulator is disabled.
+ * @system_critical: Set if the regulator is critical to system stability or
+ *                   functionality.
  * @over_current_protection: Auto disable on over current event.
  *
  * @over_current_detection: Configure over current limits.
@@ -214,6 +219,7 @@ struct regulation_constraints {
 	unsigned ramp_disable:1; /* disable ramp delay */
 	unsigned soft_start:1;	/* ramp voltage slowly */
 	unsigned pull_down:1;	/* pull down resistor when regulator off */
+	unsigned system_critical:1;	/* critical to system stability */
 	unsigned over_current_protection:1; /* auto disable on over current */
 	unsigned over_current_detection:1; /* notify on over current */
 	unsigned over_voltage_detection:1; /* notify on over voltage */
-- 
2.39.2





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux