When adding a proper schema for the Marvell mx88e6xxx switch, the scripts start complaining about this embedded example: dtschema/dtc warnings/errors: net/marvell,mvusb.example.dtb: switch@0: ports: '#address-cells' is a required property from schema $id: http://devicetree.org/schemas/net/dsa/marvell,mv88e6xxx.yaml# net/marvell,mvusb.example.dtb: switch@0: ports: '#size-cells' is a required property from schema $id: http://devicetree.org/schemas/net/dsa/marvell,mv88e6xxx.yaml# Fix this up by extending the example with those properties in the ports node. While we are at it, rename "ports" to "ethernet-ports" and rename "switch" to "ethernet-switch" as this is recommended practice. Reviewed-by: Andrew Lunn <andrew@xxxxxxx> Reviewed-by: Vladimir Oltean <vladimir.oltean@xxxxxxx> Reviewed-by: Rob Herring <robh@xxxxxxxxxx> Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx> --- Documentation/devicetree/bindings/net/marvell,mvusb.yaml | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/net/marvell,mvusb.yaml b/Documentation/devicetree/bindings/net/marvell,mvusb.yaml index 3a3325168048..ab838c1ffeed 100644 --- a/Documentation/devicetree/bindings/net/marvell,mvusb.yaml +++ b/Documentation/devicetree/bindings/net/marvell,mvusb.yaml @@ -50,11 +50,14 @@ examples: #address-cells = <1>; #size-cells = <0>; - switch@0 { + ethernet-switch@0 { compatible = "marvell,mv88e6190"; reg = <0x0>; - ports { + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + /* Port definitions */ }; -- 2.34.1