On 10/23/2023 9:53 PM, Johan Hovold wrote:
On Sat, Oct 07, 2023 at 09:18:05PM +0530, Krishna Kurapati wrote:
Enable tertiary controller for SA8295P (based on SC8280XP).
Add pinctrl support for usb ports to provide VBUS to connected peripherals.
Signed-off-by: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sa8295p-adp.dts | 49 ++++++++++++++++++++++++
1 file changed, 49 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
index fd253942e5e5..271000163823 100644
--- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
+++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
@@ -9,6 +9,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
Sort order ('p' < 'r').
ACK
+&usb_2 {
+ pinctrl-0 = <&usb2_en_state>,
+ <&usb3_en_state>,
+ <&usb4_en_state>,
+ <&usb5_en_state>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
&usb_2_hsphy0 {
vdda-pll-supply = <&vreg_l5a>;
vdda18-supply = <&vreg_l7g>;
@@ -729,3 +740,41 @@ wake-n-pins {
};
};
};
+
+&pmm8540c_gpios {
Sort order here too ('p' < 't' in "&tlmm").
ACK.
+ usb2_en_state: usb2-en-state {
No need to include '_state' in the labels.
Any specific reason ? I have no problem if removing the suffix but just
wanted to know the reason.
Regards,
Krishna,
