Hi Marco, Quoting Marco Felsch (2023-10-21 15:08:02) > Hi Kieran, > > On 23-10-21, Kieran Bingham wrote: > > Map the 'RUN' LED present on the Debix-SOM as a heartbeat. > > > > Signed-off-by: Kieran Bingham <kieran.bingham@xxxxxxxxxxxxxxxx> > > --- > > .../dts/freescale/imx8mp-debix-som-a.dtsi | 19 +++++++++++++++++++ > > 1 file changed, 19 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a.dtsi > > index bc312aa1bfc8..c9a81486da48 100644 > > --- a/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a.dtsi > > +++ b/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a.dtsi > > @@ -20,6 +20,19 @@ reg_usdhc2_vmmc: regulator-usdhc2 { > > gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; > > enable-active-high; > > }; > > + > > + gpio-leds { > > + compatible = "gpio-leds"; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_gpio_led>; > > + > > + status { > > according the bindings-doc, this should be: > > 'led-status' or 'led-0' Interesting - I can see 'led-0' is supported, but I can't see if led-status is supported. Documentation/devicetree/bindings/leds/leds-gpio.yaml: patternProperties: # The first form is preferred, but fall back to just 'led' anywhere in the # node name to at least catch some child nodes. "(^led-[0-9a-f]$|led)": type: object $ref: common.yaml# unevaluatedProperties: false That regex looks like it wouldn't support 'led-status'. Otherwise I'd probably label it as 'led-run' to match how the LED is physically labelled. I've set led-0 locally for now. > > > + label = "yellow:status"; > > label is deprecated, instead function and color should be used. Ohh - I knew that, and I should have remembered this from the last time I did an LED. That was too long ago and too small a task I guess. Looking more closely, the LED is green - not yellow too! so I've udpated this with: led-0 { gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; default-state = "on"; linux,default-trigger = "heartbeat"; function = LED_FUNCTION_STATUS; color = <LED_COLOR_ID_GREEN>; }; Updating, for a v2. > With that fixed feel to add my: > > Reviewed-by: Marco Felsch <m.felsch@xxxxxxxxxxxxxx> Thanks. -- Kieran > > > + gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; > > + default-state = "on"; > > + linux,default-trigger = "heartbeat"; > > + }; > > + }; > > }; > > > > &A53_0 { > > @@ -203,6 +216,12 @@ &wdog1 { > > }; > > > > &iomuxc { > > + pinctrl_gpio_led: gpioledgrp { > > + fsl,pins = < > > + MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16 0x19 > > + >; > > + }; > > + > > pinctrl_i2c1: i2c1grp { > > fsl,pins = < > > MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c2 > > -- > > 2.34.1 > > > >