Re: [PATCH 06/11] iio: adc: Add QCOM PMIC5 Gen3 ADC bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Krzysztof,

On 7/9/2023 10:53 PM, Krzysztof Kozlowski wrote:
On 08/07/2023 09:28, Jishnu Prakash wrote:
For the PMIC5-Gen3 type PMICs, ADC peripheral is present in HW for the
following PMICs: PMK8550, PM8550, PM8550B and PM8550VX PMICs.
It is similar to PMIC5-Gen2, with SW communication to ADCs on all PMICs
going through PBS firmware through a single register interface. This
interface is implemented on an SDAM peripheral on the master PMIC PMK8550
rather than a dedicated ADC peripheral.

Signed-off-by: Jishnu Prakash <quic_jprakash@xxxxxxxxxxx>
---
  properties:
    compatible:
@@ -27,10 +27,11 @@ properties:
            - qcom,spmi-adc5
            - qcom,spmi-adc-rev2
            - qcom,spmi-adc5-gen2
+          - qcom,spmi-adc5-gen3

This could be ordered...


Yes, will do that in the next patchset.


reg:
      description: VADC base address in the SPMI PMIC register map
-    maxItems: 1
+    minItems: 1
Why? This does not make any sense. With previous patches it looks like
random set of changes.


The idea here is to convey that reg can have multiple values for ADC5 Gen3 as there can be more than one peripheral used for ADC, so there can be multiple base addresses. I'll try to make this more clear in the next patchset.




'#address-cells':
      const: 1
@@ -38,6 +39,12 @@ properties:
    '#size-cells':
      const: 0
+ qcom,adc-tm-type:
+        description: |
+            Indicates if ADC_TM monitoring is done on this channel.
Description does not match property name.


You mean it sounds more like an enum which can take several values rather than just a boolean? I can update it to "qcom,adc-tm" if that looks better.



+            Defined for compatible property "qcom,spmi-adc5-gen3".
Then you need if:then:.


Yes, will update this explicitly for ADC5 Gen3 in the next patchset.



+        type: boolean
+
      required:
        - reg
@@ -213,7 +227,9 @@ allOf:
        properties:
          compatible:
            contains:
-            const: qcom,spmi-adc5-gen2
+            enum:
+              - qcom,spmi-adc5-gen2
+              - qcom,spmi-adc5-gen3
then:
        patternProperties:
@@ -299,7 +315,7 @@ examples:
                  label = "xo_therm";
              };
- channel@47 {
+            channel@147 {
Why?


It would be needed if this channel number was supposed to be the virtual channel number made by combining PMIC SID and actual channel number....but I could drop it for now and do it in a separate fix as Jonathan suggested.



                  reg = <PM8350_ADC5_GEN2_AMUX_THM4_100K_PU(1)>;
                  qcom,ratiometric;
                  qcom,hw-settle-time = <200>;
@@ -307,3 +323,80 @@ examples:
              };
          };
      };
+
+  - |
+    #include <dt-bindings/iio/qcom,spmi-adc5-gen3-pmk8550.h>
+    #include <dt-bindings/iio/qcom,spmi-adc5-gen3-pm8550.h>
+    #include <dt-bindings/iio/qcom,spmi-adc5-gen3-pm8550b.h>
+    #include <dt-bindings/iio/qcom,spmi-adc5-gen3-pm8550vx.h>
+
+    pmic {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      /* VADC node */
+      pmk8550_vadc: vadc@9000 {
+        compatible = "qcom,spmi-adc5-gen3";
Don't add new examples which differ only in compatible.


This example does have differences unique to ADC5 Gen3 such as use of "#thermal-sensor-cells" and "qcom,adc-tm-type" properties....to make it clearer, I'll delete some of the excess nodes which don't highlight these differences.




diff --git a/include/dt-bindings/iio/qcom,spmi-adc5-gen3-pm8550.h b/include/dt-bindings/iio/qcom,spmi-adc5-gen3-pm8550.h
new file mode 100644
index 000000000000..74e6e2f6f9ed
--- /dev/null
+++ b/include/dt-bindings/iio/qcom,spmi-adc5-gen3-pm8550.h
@@ -0,0 +1,48 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
Dual license.


I think we do have an internal rule by which we do have to add these two licenses....I'll check again and update them if required.

Thanks,

Jishnu




Best regards,
Krzysztof





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux