Le 12/10/2023 à 13:01, Sebastian Fricke a écrit :
From: Nas Chung <nas.chung@xxxxxxxxxxxxxxx>
Add the vpuapi layer of the wave5 codec driver.
This layer is used to configure the hardware according
to the parameters.
Signed-off-by: Sebastian Fricke <sebastian.fricke@xxxxxxxxxxxxx>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@xxxxxxxxxxxxx>
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@xxxxxxxxxxxxx>
Signed-off-by: Robert Beckett <bob.beckett@xxxxxxxxxxxxx>
Signed-off-by: Nas Chung <nas.chung@xxxxxxxxxxxxxxx>
---
...
+int wave5_vpu_dec_clr_disp_flag(struct vpu_instance *inst, int index)
+{
+ struct dec_info *p_dec_info = &inst->codec_info->dec_info;
+ int ret = 0;
Nit: No need to init.
+ struct vpu_device *vpu_dev = inst->dev;
+
+ if (index >= p_dec_info->num_of_display_fbs)
+ return -EINVAL;
+
+ ret = mutex_lock_interruptible(&vpu_dev->hw_lock);
+ if (ret)
+ return ret;
+ ret = wave5_dec_clr_disp_flag(inst, index);
+ mutex_unlock(&vpu_dev->hw_lock);
+
+ return ret;
+}
...
+int wave5_vpu_dec_give_command(struct vpu_instance *inst, enum codec_command cmd, void *parameter)
+{
+ struct dec_info *p_dec_info = &inst->codec_info->dec_info;
+ int ret = 0;
+
+ switch (cmd) {
+ case DEC_GET_QUEUE_STATUS: {
+ struct queue_status_info *queue_info = parameter;
+
+ queue_info->instance_queue_count = p_dec_info->instance_queue_count;
+ queue_info->report_queue_count = p_dec_info->report_queue_count;
+ break;
+ }
+ case DEC_RESET_FRAMEBUF_INFO: {
+ int i;
+
+ for (i = 0; i < MAX_REG_FRAME; i++) {
+ ret = wave5_vpu_dec_reset_framebuffer(inst, i);
+ if (ret)
+ break;
+ }
+
+ for (i = 0; i < MAX_REG_FRAME; i++) {
+ ret = reset_auxiliary_buffers(inst, i);
+ if (ret)
+ break;
+ }
+
+ wave5_vdi_free_dma_memory(inst->dev, &p_dec_info->vb_task);
+ break;
+ }
+ case DEC_GET_SEQ_INFO: {
+ struct dec_initial_info *seq_info = parameter;
+
+ *seq_info = p_dec_info->initial_info;
+ break;
+ }
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
return ret;
?
CJ
+}
...
