This dts adds support for Huawei Honor 5X / GR5 (2016) smartphone
released in 2015.
Add device tree with initial support for:
- GPIO keys
- Hall sensor
- SDHCI (internal and external storage)
- WCNSS (BT/WIFI)
- Sensors (accelerometer and proximity)
- Vibrator
- Touchscreen
Signed-off-by: Raymond Hackley <raymondhackley@xxxxxxxxxxxxxx>
Signed-off-by: Lukas Walter <lukas.walter@xxxxxxxxx>
---
Changes in v2:
- Switch Signed-off-by order
- Specify reserved-memory region usage
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
.../boot/dts/qcom/msm8939-huawei-kiwi.dts | 242 ++++++++++++++++++
2 files changed, 243 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/msm8939-huawei-kiwi.dts
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index d6cb840b7050..1b3057c1a68d 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -45,6 +45,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-thwc-uf896.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-thwc-ufi001c.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt88047.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-yiming-uz801v3.dtb
+dtb-$(CONFIG_ARCH_QCOM) += msm8939-huawei-kiwi.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8939-longcheer-l9100.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8939-samsung-a7.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8939-sony-xperia-kanuti-tulip.dtb
diff --git a/arch/arm64/boot/dts/qcom/msm8939-huawei-kiwi.dts b/arch/arm64/boot/dts/qcom/msm8939-huawei-kiwi.dts
new file mode 100644
index 000000000000..3cec51891aed
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8939-huawei-kiwi.dts
@@ -0,0 +1,242 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8939-pm8916.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "Huawei Honor 5X / GR5 (2016)";
+ compatible = "huawei,kiwi", "qcom,msm8939";
+ chassis-type = "handset";
+
+ aliases {
+ mmc0 = &sdhc_1; /* SDC1 eMMC slot */
+ mmc1 = &sdhc_2; /* SDC2 SD card slot */
+ serial0 = &blsp_uart2;
+ };
+
+ chosen {
+ stdout-path = "serial0";
+ };
+
+ reserved-memory {
+ qseecom_mem: qseecom@84a00000 {
+ reg = <0x0 0x84a00000 0x0 0x1600000>;
+ no-map;
+ };
+ };
+
+ gpio-hall-sensor {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&gpio_hall_sensor_default>;
+ pinctrl-names = "default";
+
+ label = "GPIO Hall Effect Sensor";
+
+ event-hall-sensor {
+ label = "Hall Effect Sensor";
+ gpios = <&tlmm 69 GPIO_ACTIVE_LOW>;
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_LID>;
+ linux,can-disable;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&gpio_keys_default>;
+ pinctrl-names = "default";
+
+ label = "GPIO Buttons";
+
+ button-volume-up {
+ label = "Volume Up";
+ gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+ };
+
+ usb_id: usb-id {
+ compatible = "linux,extcon-usb-gpio";
+ id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&usb_id_default>;
+ pinctrl-names = "default";
+ };
+};
+
+&blsp_i2c2 {
+ status = "okay";
+
+ accelerometer@1e {
+ compatible = "kionix,kx023-1025";
+ reg = <0x1e>;
+
+ vdd-supply = <&pm8916_l17>;
+ vddio-supply = <&pm8916_l6>;
+ pinctrl-0 = <&accel_int_default>;
+ pinctrl-names = "default";
+ mount-matrix = "-1", "0", "0",
+ "0", "1", "0",
+ "0", "0", "1";
+ };
+
+ proximity@39 {
+ compatible = "avago,apds9930";
+ reg = <0x39>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <113 IRQ_TYPE_EDGE_FALLING>;
+
+ vdd-supply = <&pm8916_l17>;
+ vddio-supply = <&pm8916_l6>;
+
+ led-max-microamp = <25000>;
+ amstaos,proximity-diodes = <0>;
+
+ pinctrl-0 = <&prox_irq_default>;
+ pinctrl-names = "default";
+ };
+};
+
+&blsp_i2c5 {
+ status = "okay";
+
+ touchscreen@1c {
+ compatible = "cypress,tt21000";
+
+ reg = <0x1c>;
+ interrupt-parent = <&tlmm>;
+ interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+
+ reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
+
+ /*
+ * NOTE: vdd is not directly supplied by pm8916_l16, it seems to be a
+ * fixed regulator that is automatically enabled by pm8916_l16.
+ */
+ vdd-supply = <&pm8916_l16>;
+ vddio-supply = <&pm8916_l16>;
+
+ pinctrl-0 = <&touchscreen_default>;
+ pinctrl-names = "default";
+ };
+};
+
+&blsp_uart2 {
+ status = "okay";
+};
+
+&pm8916_l8 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+};
+
+&pm8916_resin {
+ linux,code = <KEY_VOLUMEDOWN>;
+ status = "okay";
+};
+
+&pm8916_rpm_regulators {
+ pm8916_l16: l16 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8916_l17: l17 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+};
+
+&pm8916_vib {
+ status = "okay";
+};
+
+&sdhc_1 {
+ status = "okay";
+};
+
+&sdhc_2 {
+ pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+ pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
+ pinctrl-names = "default", "sleep";
+
+ cd-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>;
+
+ status = "okay";
+};
+
+&usb {
+ extcon = <&usb_id>, <&usb_id>;
+ status = "okay";
+};
+
+&usb_hs_phy {
+ extcon = <&usb_id>;
+};
+
+&wcnss {
+ status = "okay";
+};
+
+&wcnss_iris {
+ compatible = "qcom,wcn3620";
+};
+
+&wcnss_mem {
+ status = "okay";
+};
+
+&tlmm {
+ accel_int_default: accel-int-default-state {
+ pins = "gpio115";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ gpio_hall_sensor_default: gpio-hall-sensor-default-state {
+ pins = "gpio69";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ gpio_keys_default: gpio-keys-default-state {
+ pins = "gpio107";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ prox_irq_default: prox-irq-default-state {
+ pins = "gpio113";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ sdc2_cd_default: sdc2-cd-default-state {
+ pins = "gpio38";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ touchscreen_default: touchscreen-default-state {
+ pins = "gpio12", "gpio13";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ usb_id_default: usb-id-default-state {
+ pins = "gpio110";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+};
--
2.42.0
