On Friday, October 20, 2023 4:57:04 PM CEST Andre Przywara wrote: > Hi, > > this adds support for the Orange Pi Zero 2W, a small board in the > Raspberry Pi Zero form factor, but with an Allwinner H618 Soc and up to > 4 GB of DRAM. > > This is just for the base board, created by looking at the schematics. > There is an FPC connector, which connects to a stackable expansion > board, that provides two additional USB-A sockets and an Ethernet jack, > among other connectors. > What is the recommended way to model this, via a DT overlay, applied > dynamically by the bootloader, or using a separate .dts file, that > includes this base board file? I would do it through DT overlay. It can be included in kernel, alongside board DT. Best regards, Jernej > > Cheers, > Andre > > Andre Przywara (2): > dt-bindings: arm: sunxi: add Orange Pi Zero 2W > arm64: dts: allwinner: h616: add Orange Pi Zero 2W support > > .../devicetree/bindings/arm/sunxi.yaml | 5 + > .../allwinner/sun50i-h618-orangepi-zero2w.dts | 176 ++++++++++++++++++ > 2 files changed, 181 insertions(+) > create mode 100644 > arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero2w.dts
