On Rockchip RK3588 one of the DWC3 cores is integrated weirdly and requires two extra clocks to be enabled. Without these extra clocks hot-plugging USB devices is broken. Signed-off-by: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx> --- drivers/usb/dwc3/core.c | 28 ++++++++++++++++++++++++++++ drivers/usb/dwc3/core.h | 4 ++++ 2 files changed, 32 insertions(+) diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 343d2570189f..639b768c3386 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -854,8 +854,20 @@ static int dwc3_clk_enable(struct dwc3 *dwc) if (ret) goto disable_ref_clk; + ret = clk_prepare_enable(dwc->utmi_clk); + if (ret) + goto disable_susp_clk; + + ret = clk_prepare_enable(dwc->pipe_clk); + if (ret) + goto disable_utmi_clk; + return 0; +disable_utmi_clk: + clk_disable_unprepare(dwc->utmi_clk); +disable_susp_clk: + clk_disable_unprepare(dwc->susp_clk); disable_ref_clk: clk_disable_unprepare(dwc->ref_clk); disable_bus_clk: @@ -865,6 +877,8 @@ static int dwc3_clk_enable(struct dwc3 *dwc) static void dwc3_clk_disable(struct dwc3 *dwc) { + clk_disable_unprepare(dwc->pipe_clk); + clk_disable_unprepare(dwc->utmi_clk); clk_disable_unprepare(dwc->susp_clk); clk_disable_unprepare(dwc->ref_clk); clk_disable_unprepare(dwc->bus_clk); @@ -1785,6 +1799,20 @@ static int dwc3_get_clocks(struct dwc3 *dwc) } } + /* specific to Rockchip RK3588 */ + dwc->utmi_clk = devm_clk_get_optional(dev, "utmi"); + if (IS_ERR(dwc->utmi_clk)) { + return dev_err_probe(dev, PTR_ERR(dwc->utmi_clk), + "could not get utmi clock\n"); + } + + /* specific to Rockchip RK3588 */ + dwc->pipe_clk = devm_clk_get_optional(dev, "pipe"); + if (IS_ERR(dwc->pipe_clk)) { + return dev_err_probe(dev, PTR_ERR(dwc->pipe_clk), + "could not get pipe clock\n"); + } + return 0; } diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index a69ac67d89fe..f5e6ae6e394e 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -991,6 +991,8 @@ struct dwc3_scratchpad_array { * @bus_clk: clock for accessing the registers * @ref_clk: reference clock * @susp_clk: clock used when the SS phy is in low power (S3) state + * @utmi_clk: clock used for USB2 PHY communication + * @pipe_clk: clock used for USB3 PHY communication * @reset: reset control * @regs: base address for our registers * @regs_size: address space size @@ -1156,6 +1158,8 @@ struct dwc3 { struct clk *bus_clk; struct clk *ref_clk; struct clk *susp_clk; + struct clk *utmi_clk; + struct clk *pipe_clk; struct reset_control *reset; -- 2.42.0