Hi Angelo,
On Thu, 2023-10-19 at 11:47 +0200, AngeloGioacchino Del Regno wrote:
> Il 19/10/23 09:54, Jason-ch Chen ha scritto:
> > From: jason-ch chen <Jason-ch.Chen@xxxxxxxxxxxx>
> >
> > MT8188 is a SoC based on 64bit ARMv8 architecture. It contains 6
> > CA55
> > and 2 CA78 cores. MT8188 share many HW IP with MT65xx series.
> >
> > We add basic chip support for MediaTek MT8188 on evaluation board.
> >
> > Signed-off-by: jason-ch chen <Jason-ch.Chen@xxxxxxxxxxxx>
> > ---
> > arch/arm64/boot/dts/mediatek/Makefile | 1 +
> > arch/arm64/boot/dts/mediatek/mt8188-evb.dts | 388 ++++++++
> > arch/arm64/boot/dts/mediatek/mt8188.dtsi | 949
> > ++++++++++++++++++++
> > 3 files changed, 1338 insertions(+)
> > create mode 100644 arch/arm64/boot/dts/mediatek/mt8188-evb.dts
> > create mode 100644 arch/arm64/boot/dts/mediatek/mt8188.dtsi
> >
> > diff --git a/arch/arm64/boot/dts/mediatek/Makefile
> > b/arch/arm64/boot/dts/mediatek/Makefile
> > index e6e7592a3645..8900b939ed52 100644
> > --- a/arch/arm64/boot/dts/mediatek/Makefile
> > +++ b/arch/arm64/boot/dts/mediatek/Makefile
> > @@ -44,6 +44,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-
> > krane-sku0.dtb
> > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb
> > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-pumpkin.dtb
> > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-evb.dtb
> > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8188-evb.dtb
> > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-hayato-r1.dtb
> > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-hayato-r5-sku2.dtb
> > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-spherion-r0.dtb
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8188-evb.dts
> > b/arch/arm64/boot/dts/mediatek/mt8188-evb.dts
> > new file mode 100644
> > index 000000000000..773bf84cfb94
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/mediatek/mt8188-evb.dts
> > @@ -0,0 +1,388 @@
> > +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> > +/*
> > + * Copyright (C) 2023 MediaTek Inc.
> > + */
> > +/dts-v1/;
> > +#include "mt8188.dtsi"
> > +#include "mt6359.dtsi"
> > +
> > +/ {
> > + model = "MediaTek MT8188 evaluation board";
> > + compatible = "mediatek,mt8188-evb", "mediatek,mt8188";
> > +
> > + aliases {
> > + serial0 = &uart0;
> > + i2c0 = &i2c0;
> > + i2c1 = &i2c1;
> > + i2c2 = &i2c2;
> > + i2c3 = &i2c3;
> > + i2c4 = &i2c4;
> > + i2c5 = &i2c5;
> > + i2c6 = &i2c6;
> > + mmc0 = &mmc0;
> > + };
> > +
> > + chosen: chosen {
> > + stdout-path = "serial0:115200n8";
> > + };
> > +
> > + memory@40000000 {
> > + device_type = "memory";
> > + reg = <0 0x40000000 0 0x80000000>;
> > + };
> > +
> > + reserved_memory: reserved-memory {
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > + ranges;
> > +
> > + scp_mem_reserved: memory@50000000 {
> > + compatible = "shared-dma-pool";
> > + reg = <0 0x50000000 0 0x2900000>;
> > + no-map;
> > + };
> > + };
> > +};
> > +
> > +&auxadc {
> > + status = "okay";
> > +};
> > +
> > +&i2c0 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&i2c0_pins>;
> > + clock-frequency = <400000>;
> > + status = "okay";
> > +};
> > +
> > +&i2c1 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&i2c1_pins>;
> > + clock-frequency = <400000>;
> > + status = "okay";
> > +};
> > +
> > +&i2c2 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&i2c2_pins>;
> > + clock-frequency = <400000>;
> > + status = "okay";
> > +};
> > +
> > +&i2c3 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&i2c3_pins>;
> > + clock-frequency = <400000>;
> > + status = "okay";
> > +};
> > +
> > +&i2c4 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&i2c4_pins>;
> > + clock-frequency = <400000>;
> > + status = "okay";
> > +};
> > +
> > +&i2c5 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&i2c5_pins>;
> > + clock-frequency = <400000>;
> > + status = "okay";
> > +};
> > +
> > +&i2c6 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&i2c6_pins>;
> > + clock-frequency = <400000>;
> > + status = "okay";
> > +};
> > +
> > +&mmc0 {
> > + status = "okay";
> > + pinctrl-names = "default", "state_uhs";
> > + pinctrl-0 = <&mmc0_default_pins>;
> > + pinctrl-1 = <&mmc0_uhs_pins>;
> > + bus-width = <8>;
> > + max-frequency = <200000000>;
>
> ...that's how it should be ordered:
>
> &mmc0 {
> bus-width = <8>;
> hs400-ds-delay = <0x1481b>;
> max-frequency = <200000000>;
>
> cap-mmc-highspeed;
> cap-mmc-hw-reset;
> mmc-hs200-1_8v;
> mmc-hs400-1_8v;
> no-sdio;
> no-sd;
> non-removable;
>
> vmmc-supply = ...
> vqmmc-supply = ...
>
> pinctrl-0 ...
> pinctrl-1 ...
> pinctrl-names ...
>
> status = "okay";
> };
>
> > + cap-mmc-highspeed;
> > + mmc-hs200-1_8v;
> > + mmc-hs400-1_8v;
> > + supports-cqe;
> > + cap-mmc-hw-reset;
> > + no-sdio;
> > + no-sd;
> > + hs400-ds-delay = <0x1481b>;
> > + vmmc-supply = <&mt6359_vemc_1_ldo_reg>;
> > + vqmmc-supply = <&mt6359_vufs_ldo_reg>;
> > + non-removable;
> > +};
> > +
> > +&mt6359_vcore_buck_reg {
> > + regulator-always-on;
> > +};
> > +
> > +&mt6359_vgpu11_buck_reg {
> > + regulator-always-on;
> > +};
> > +
> > +&mt6359_vpu_buck_reg {
> > + regulator-always-on;
> > +};
> > +
> > +&mt6359_vrf12_ldo_reg {
> > + regulator-always-on;
> > +};
> > +
> > +&nor_flash {
> > + status = "okay";
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&nor_pins_default>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + flash@0 {
> > + compatible = "jedec,spi-nor";
> > + reg = <0>;
> > + spi-max-frequency = <52000000>;
> > + };
> > +};
> > +
> > +&pio {
> > + adsp_uart_pins: adsp-uart-pins {
> > + pins-adsp-uart {
>
> pins-tx-rx {
>
> > + pinmux = <PINMUX_GPIO35__FUNC_O_ADSP_UTXD0>,
> > + <PINMUX_GPIO36__FUNC_I1_ADSP_URXD0>;
> > + };
> > + };
> > +
>
> ..snip..
>
> > +
> > + mmc0_uhs_pins: mmc0-uhs-pins {
> > + pins-cmd-dat {
> > + pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>,
> > + <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>,
> > + <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>,
> > + <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>,
> > + <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>,
> > + <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>,
> > + <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>,
> > + <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>,
> > + <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>;
> > + input-enable;
> > + drive-strength = <8>;
> > + bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
> > + };
> > +
> > + pins-clk {
>
> pins-clk-ds {
> pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>,
> <PINMUX_GPIO162__FUNC_B0_MSDC0_DSL>;
> drive-strength = <8>;
> bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
> };
>
> ...that's shorter: both pins are anyway sharing the same drive
> strength and bias.
>
> > + pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>;
> > + drive-strength = <8>;
> > + bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
> > + };
> > +
> > + pins-ds {
> > + pinmux = <PINMUX_GPIO162__FUNC_B0_MSDC0_DSL>;
> > + drive-strength = <8>;
> > + bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
> > + };
> > +
> > + pins-rst {
> > + pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>;
> > + drive-strength = <8>;
> > + bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
> > + };
> > + };
> > +
> > + nor_pins_default: nor-pins {
> > + pins0 {
>
> pins-io-ck {
>
> > + pinmux = <PINMUX_GPIO127__FUNC_B0_SPINOR_IO0>,
> > + <PINMUX_GPIO125__FUNC_O_SPINOR_CK>,
> > + <PINMUX_GPIO128__FUNC_B0_SPINOR_IO1>;
> > + bias-pull-down;
> > + };
> > +
> > + pins1 {
>
> pins-io-cs {
>
> > + pinmux = <PINMUX_GPIO126__FUNC_O_SPINOR_CS>,
> > + <PINMUX_GPIO129__FUNC_B0_SPINOR_IO2>,
> > + <PINMUX_GPIO130__FUNC_B0_SPINOR_IO3>;
> > + bias-pull-up;
> > + };
> > + };
> > +
> > + spi0_pins: spi0-pins {
> > + pins-spi {
> > + pinmux = <PINMUX_GPIO69__FUNC_O_SPIM0_CSB>,
> > + <PINMUX_GPIO70__FUNC_O_SPIM0_CLK>,
> > + <PINMUX_GPIO71__FUNC_B0_SPIM0_MOSI>,
> > + <PINMUX_GPIO72__FUNC_B0_SPIM0_MISO>;
> > + bias-disable;
> > + };
> > + };
> > +
> > + spi1_pins: spi1-pins {
> > + pins-spi {
> > + pinmux = <PINMUX_GPIO75__FUNC_O_SPIM1_CSB>,
> > + <PINMUX_GPIO76__FUNC_O_SPIM1_CLK>,
> > + <PINMUX_GPIO77__FUNC_B0_SPIM1_MOSI>,
> > + <PINMUX_GPIO78__FUNC_B0_SPIM1_MISO>;
> > + bias-disable;
> > + };
> > + };
> > +
> > + spi2_pins: spi2-pins {
> > + pins-spi {
> > + pinmux = <PINMUX_GPIO79__FUNC_O_SPIM2_CSB>,
> > + <PINMUX_GPIO80__FUNC_O_SPIM2_CLK>,
> > + <PINMUX_GPIO81__FUNC_B0_SPIM2_MOSI>,
> > + <PINMUX_GPIO82__FUNC_B0_SPIM2_MISO>;
> > + bias-disable;
> > + };
> > + };
> > +
> > + uart0_pins: uart0-pins {
> > + pins-uart0 {
>
> pins-rx-tx {
>
> > + pinmux = <PINMUX_GPIO31__FUNC_O_UTXD0>,
> > + <PINMUX_GPIO32__FUNC_I1_URXD0>;
> > + bias-pull-up;
> > + };
> > + };
> > +};
> > +
>
> ..snip..
>
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8188.dtsi
> > b/arch/arm64/boot/dts/mediatek/mt8188.dtsi
> > new file mode 100644
> > index 000000000000..c5af32fb7e85
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/mediatek/mt8188.dtsi
> > @@ -0,0 +1,949 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * Copyright (c) 2023 MediaTek Inc.
> > + *
> > + */
> > +
> > +/dts-v1/;
> > +#include <dt-bindings/clock/mediatek,mt8188-clk.h>
> > +#include <dt-bindings/interrupt-controller/arm-gic.h>
> > +#include <dt-bindings/interrupt-controller/irq.h>
> > +#include <dt-bindings/phy/phy.h>
> > +#include <dt-bindings/pinctrl/mediatek,mt8188-pinfunc.h>
> > +#include <dt-bindings/power/mediatek,mt8188-power.h>
> > +
> > +/ {
> > + compatible = "mediatek,mt8188";
> > + interrupt-parent = <&gic>;
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > +
> > + cpus {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + cpu0: cpu@0 {
> > + device_type = "cpu";
> > + compatible = "arm,cortex-a55";
> > + reg = <0x000>;
> > + enable-method = "psci";
> > + clock-frequency = <2000000000>;
> > + capacity-dmips-mhz = <282>;
> > + cpu-idle-states = <&cpu_off_l &cluster_off_l>;
> > + i-cache-size = <32768>;
> > + i-cache-line-size = <64>;
> > + i-cache-sets = <128>;
> > + d-cache-size = <32768>;
> > + d-cache-line-size = <64>;
> > + d-cache-sets = <128>;
> > + next-level-cache = <&l2_0>;
> > + #cooling-cells = <2>;
> > + };
> > +
> > + cpu1: cpu@100 {
> > + device_type = "cpu";
> > + compatible = "arm,cortex-a55";
> > + reg = <0x100>;
> > + enable-method = "psci";
> > + clock-frequency = <2000000000>;
> > + capacity-dmips-mhz = <282>;
> > + cpu-idle-states = <&cpu_off_l &cluster_off_l>;
> > + i-cache-size = <32768>;
> > + i-cache-line-size = <64>;
> > + i-cache-sets = <128>;
> > + d-cache-size = <32768>;
> > + d-cache-line-size = <64>;
> > + d-cache-sets = <128>;
> > + next-level-cache = <&l2_0>;
> > + #cooling-cells = <2>;
> > + };
> > +
> > + cpu2: cpu@200 {
> > + device_type = "cpu";
> > + compatible = "arm,cortex-a55";
> > + reg = <0x200>;
> > + enable-method = "psci";
> > + clock-frequency = <2000000000>;
> > + capacity-dmips-mhz = <282>;
> > + cpu-idle-states = <&cpu_off_l &cluster_off_l>;
> > + i-cache-size = <32768>;
> > + i-cache-line-size = <64>;
> > + i-cache-sets = <128>;
> > + d-cache-size = <32768>;
> > + d-cache-line-size = <64>;
> > + d-cache-sets = <128>;
> > + next-level-cache = <&l2_0>;
> > + #cooling-cells = <2>;
> > + };
> > +
> > + cpu3: cpu@300 {
> > + device_type = "cpu";
> > + compatible = "arm,cortex-a55";
> > + reg = <0x300>;
> > + enable-method = "psci";
> > + clock-frequency = <2000000000>;
> > + capacity-dmips-mhz = <282>;
> > + cpu-idle-states = <&cpu_off_l &cluster_off_l>;
> > + i-cache-size = <32768>;
> > + i-cache-line-size = <64>;
> > + i-cache-sets = <128>;
> > + d-cache-size = <32768>;
> > + d-cache-line-size = <64>;
> > + d-cache-sets = <128>;
> > + next-level-cache = <&l2_0>;
> > + #cooling-cells = <2>;
> > + };
> > +
> > + cpu4: cpu@400 {
> > + device_type = "cpu";
> > + compatible = "arm,cortex-a55";
> > + reg = <0x400>;
> > + enable-method = "psci";
> > + clock-frequency = <2000000000>;
> > + capacity-dmips-mhz = <282>;
> > + cpu-idle-states = <&cpu_off_l &cluster_off_l>;
> > + i-cache-size = <32768>;
> > + i-cache-line-size = <64>;
> > + i-cache-sets = <128>;
> > + d-cache-size = <32768>;
> > + d-cache-line-size = <64>;
> > + d-cache-sets = <128>;
> > + next-level-cache = <&l2_0>;
> > + #cooling-cells = <2>;
> > + };
> > +
> > + cpu5: cpu@500 {
> > + device_type = "cpu";
> > + compatible = "arm,cortex-a55";
> > + reg = <0x500>;
> > + enable-method = "psci";
> > + clock-frequency = <2000000000>;
> > + capacity-dmips-mhz = <282>;
> > + cpu-idle-states = <&cpu_off_l &cluster_off_l>;
> > + i-cache-size = <32768>;
> > + i-cache-line-size = <64>;
> > + i-cache-sets = <128>;
> > + d-cache-size = <32768>;
> > + d-cache-line-size = <64>;
> > + d-cache-sets = <128>;
> > + next-level-cache = <&l2_0>;
> > + #cooling-cells = <2>;
> > + };
> > +
> > + cpu6: cpu@600 {
> > + device_type = "cpu";
> > + compatible = "arm,cortex-a78";
> > + reg = <0x600>;
> > + enable-method = "psci";
> > + clock-frequency = <2600000000>;
> > + capacity-dmips-mhz = <1024>;
> > + cpu-idle-states = <&cpu_off_b &cluster_off_b>;
> > + i-cache-size = <65536>;
> > + i-cache-line-size = <64>;
> > + i-cache-sets = <256>;
> > + d-cache-size = <65536>;
> > + d-cache-line-size = <64>;
> > + d-cache-sets = <256>;
> > + next-level-cache = <&l2_1>;
> > + #cooling-cells = <2>;
> > + };
> > +
> > + cpu7: cpu@700 {
> > + device_type = "cpu";
> > + compatible = "arm,cortex-a78";
> > + reg = <0x700>;
> > + enable-method = "psci";
> > + clock-frequency = <2600000000>;
> > + capacity-dmips-mhz = <1024>;
> > + cpu-idle-states = <&cpu_off_b &cluster_off_b>;
> > + i-cache-size = <65536>;
> > + i-cache-line-size = <64>;
> > + i-cache-sets = <256>;
> > + d-cache-size = <65536>;
> > + d-cache-line-size = <64>;
> > + d-cache-sets = <256>;
> > + next-level-cache = <&l2_1>;
> > + #cooling-cells = <2>;
> > + };
> > +
> > + cpu-map {
> > + cluster0 {
> > + core0 {
> > + cpu = <&cpu0>;
> > + };
> > +
> > + core1 {
> > + cpu = <&cpu1>;
> > + };
> > +
> > + core2 {
> > + cpu = <&cpu2>;
> > + };
> > +
> > + core3 {
> > + cpu = <&cpu3>;
> > + };
> > +
> > + core4 {
> > + cpu = <&cpu4>;
> > + };
> > +
> > + core5 {
> > + cpu = <&cpu5>;
> > + };
> > +
> > + core6 {
> > + cpu = <&cpu6>;
> > + };
> > +
> > + core7 {
> > + cpu = <&cpu7>;
> > + };
> > + };
> > + };
> > +
> > + idle-states {
> > + entry-method = "psci";
> > +
> > + cpu_off_l: cpu-off-l {
> > + compatible = "arm,idle-state";
> > + arm,psci-suspend-param = <0x00010000>;
> > + local-timer-stop;
> > + entry-latency-us = <50>;
> > + exit-latency-us = <95>;
> > + min-residency-us = <580>;
> > + };
> > +
> > + cpu_off_b: cpu-off-b {
> > + compatible = "arm,idle-state";
> > + arm,psci-suspend-param = <0x00010000>;
> > + local-timer-stop;
> > + entry-latency-us = <45>;
> > + exit-latency-us = <140>;
> > + min-residency-us = <740>;
> > + };
> > +
> > + cluster_off_l: cluster-off-l {
> > + compatible = "arm,idle-state";
> > + arm,psci-suspend-param = <0x01010010>;
> > + local-timer-stop;
> > + entry-latency-us = <55>;
> > + exit-latency-us = <155>;
> > + min-residency-us = <840>;
> > + };
> > +
> > + cluster_off_b: cluster-off-b {
> > + compatible = "arm,idle-state";
> > + arm,psci-suspend-param = <0x01010010>;
> > + local-timer-stop;
> > + entry-latency-us = <50>;
> > + exit-latency-us = <200>;
> > + min-residency-us = <1000>;
> > + };
> > + };
> > +
> > + l2_0: l2-cache0 {
> > + compatible = "cache";
> > + cache-level = <2>;
>
> NACK. You're not specifying the L2 cache correctly.
>
> Hint: the missing properties are
> cache-size
> cache-line-size
> cache-sets
>
> > + next-level-cache = <&l3_0>;
> > + cache-unified;
> > + };
> > +
> > + l2_1: l2-cache1 {
> > + compatible = "cache";
> > + cache-level = <2>;
>
> Same here. Please properly define the L2 cache.
>
> > + next-level-cache = <&l3_0>;
> > + cache-unified;
> > + };
> > +
> > + l3_0: l3-cache {
> > + compatible = "cache";
>
> And again.
>
> This SoC has 256KB L2 shared between the two A78 cores, 128KB L2
> shared
> between the A55 cores, and 2MB of L3 cache shared across all.
>
> > + cache-level = <3>;
> > + cache-unified;
> > + };
> > + };
> > +
> > + clk13m: oscillator-13m {
> > + compatible = "fixed-clock";
> > + #clock-cells = <0>;
> > + clock-frequency = <13000000>;
> > + clock-output-names = "clk13m";
> > + };
> > +
> > + clk26m: oscillator-26m {
> > + compatible = "fixed-clock";
> > + #clock-cells = <0>;
> > + clock-frequency = <26000000>;
> > + clock-output-names = "clk26m";
> > + };
> > +
> > + clk32k: oscillator-32k {
> > + compatible = "fixed-clock";
> > + #clock-cells = <0>;
> > + clock-frequency = <32768>;
> > + clock-output-names = "clk32k";
> > + };
> > +
> > + pmu-a55 {
> > + compatible = "arm,cortex-a55-pmu";
> > + interrupt-parent = <&gic>;
> > + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH
> > &ppi_cluster0>;
> > + };
> > +
> > + pmu-a78 {
> > + compatible = "arm,cortex-a78-pmu";
> > + interrupt-parent = <&gic>;
> > + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH
> > &ppi_cluster1>;
> > + };
>
> Question: Is the ARM DSU PMU broken also on this SoC's TZ firmware?!
Because of security concerns, the default configuration of the ARM
trusted firmware does not include enabling the ARM DSU PMU.
However, it is possible to add a patch to enable this feature. The
patch https://crrev.com/c/4885752 has not been merged into TF-A yet.
We are currently considering upstreaming it.
In the next version, I will rectify the issues mentioned in the other
comments. Thank you for your review.
> > +
> > + psci {
> > + compatible = "arm,psci-1.0";
> > + method = "smc";
> > + };
> > +
> > + timer: timer {
> > + compatible = "arm,armv8-timer";
> > + interrupt-parent = <&gic>;
> > + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH 0>,
> > + <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH 0>,
> > + <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH 0>,
> > + <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH 0>;
> > + clock-frequency = <13000000>;
> > + };
> > +
> > + soc {
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > + compatible = "simple-bus";
> > + ranges;
> > +
> > + gic: interrupt-controller@c000000 {
> > + compatible = "arm,gic-v3";
> > + #interrupt-cells = <4>;
> > + #redistributor-regions = <1>;
> > + interrupt-parent = <&gic>;
> > + interrupt-controller;
> > + reg = <0 0x0c000000 0 0x40000>,
> > + <0 0x0c040000 0 0x200000>;
> > + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
> > +
> > + ppi-partitions {
> > + ppi_cluster0: interrupt-partition-0 {
> > + affinity = <&cpu0 &cpu1 &cpu2
> > &cpu3 &cpu4 &cpu5>;
> > + };
> > +
> > + ppi_cluster1: interrupt-partition-1 {
> > + affinity = <&cpu6 &cpu7>;
> > + };
> > + };
> > + };
> > +
> > + topckgen: syscon@10000000 {
> > + compatible = "mediatek,mt8188-topckgen",
> > "syscon";
> > + reg = <0 0x10000000 0 0x1000>;
> > + #clock-cells = <1>;
> > + };
> > +
> > + infracfg_ao: syscon@10001000 {
> > + compatible = "mediatek,mt8188-infracfg-ao",
> > "syscon";
> > + reg = <0 0x10001000 0 0x1000>;
> > + #clock-cells = <1>;
> > + };
> > +
> > + pericfg: syscon@10003000 {
> > + compatible = "mediatek,mt8188-pericfg",
> > "syscon";
> > + reg = <0 0x10003000 0 0x1000>;
> > + #clock-cells = <1>;
> > + };
> > +
> > + pio: pinctrl@10005000 {
> > + compatible = "mediatek,mt8188-pinctrl";
> > + reg = <0 0x10005000 0 0x1000>,
> > + <0 0x11c00000 0 0x1000>,
> > + <0 0x11e10000 0 0x1000>,
> > + <0 0x11e20000 0 0x1000>,
> > + <0 0x11ea0000 0 0x1000>,
> > + <0 0x1000b000 0 0x1000>;
> > + reg-names = "iocfg0", "iocfg_rm",
> > + "iocfg_lt", "iocfg_lm", "iocfg_rt",
> > + "eint";
>
> reg-names = "iocfg0", "iocfg_rm", "iocfg_lt",
> "iocfg_lm", "iocfg_rt", "eint";
>
> one less line :-)
>
> > + gpio-controller;
> > + #gpio-cells = <2>;
> > + gpio-ranges = <&pio 0 0 176>;
> > + interrupt-controller;
> > + interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH
> > 0>;
> > + #interrupt-cells = <2>;
> > + };
> > +
> > + watchdog: watchdog@10007000 {
> > + compatible = "mediatek,mt8188-wdt";
> > + mediatek,disable-extrst;
> > + reg = <0 0x10007000 0 0x100>;
>
> mediatek,disable-extrst goes here.
>
> > + #reset-cells = <1>;
> > + };
> > +
> > + apmixedsys: syscon@1000c000 {
> > + compatible = "mediatek,mt8188-apmixedsys",
> > "syscon";
> > + reg = <0 0x1000c000 0 0x1000>;
> > + #clock-cells = <1>;
> > + };
> > +
> > + systimer: timer@10017000 {
> > + compatible = "mediatek,mt8188-timer",
> > "mediatek,mt6765-timer";
> > + reg = <0 0x10017000 0 0x1000>;
> > + reg-names = "sys_timer_base";
>
> You don't need reg-names here but anyway, if you really want to keep
> that, please
> no underscores when possible.
>
> > + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH
> > 0>;
> > + clocks = <&clk13m>;
> > + };
> > +
>
> Regards,
> Angelo
Regards,
Jason
