Re: [PATCH v4 4/7] riscv: dts: sophgo: Separate compatible specific for CV1800B soc

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 2023/10/19 7:18, Inochi Amaoto wrote:
As CV180x and CV181x have the identical layouts, it is OK to use the
cv1800b basic device tree for the whole series.
For CV1800B soc specific compatible, just move them out of the common
file.

Signed-off-by: Inochi Amaoto <inochiama@xxxxxxxxxxx>

Thanks, it looks good now.

Acked-by: Chen Wang <unicorn_wang@xxxxxxxxxxx>

---
  arch/riscv/boot/dts/sophgo/cv1800b.dtsi | 119 ++---------------------
  arch/riscv/boot/dts/sophgo/cv18xx.dtsi  | 120 ++++++++++++++++++++++++
  2 files changed, 127 insertions(+), 112 deletions(-)
  create mode 100644 arch/riscv/boot/dts/sophgo/cv18xx.dtsi

diff --git a/arch/riscv/boot/dts/sophgo/cv1800b.dtsi b/arch/riscv/boot/dts/sophgo/cv1800b.dtsi
index df40e87ee063..165e9e320a8c 100644
--- a/arch/riscv/boot/dts/sophgo/cv1800b.dtsi
+++ b/arch/riscv/boot/dts/sophgo/cv1800b.dtsi
@@ -3,121 +3,16 @@
   * Copyright (C) 2023 Jisheng Zhang <jszhang@xxxxxxxxxx>
   */

-#include <dt-bindings/interrupt-controller/irq.h>
+#include "cv18xx.dtsi"

  / {
  	compatible = "sophgo,cv1800b";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	cpus: cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		timebase-frequency = <25000000>;
-
-		cpu0: cpu@0 {
-			compatible = "thead,c906", "riscv";
-			device_type = "cpu";
-			reg = <0>;
-			d-cache-block-size = <64>;
-			d-cache-sets = <512>;
-			d-cache-size = <65536>;
-			i-cache-block-size = <64>;
-			i-cache-sets = <128>;
-			i-cache-size = <32768>;
-			mmu-type = "riscv,sv39";
-			riscv,isa = "rv64imafdc";
-			riscv,isa-base = "rv64i";
-			riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "zicntr", "zicsr",
-					       "zifencei", "zihpm";
-
-			cpu0_intc: interrupt-controller {
-				compatible = "riscv,cpu-intc";
-				interrupt-controller;
-				#address-cells = <0>;
-				#interrupt-cells = <1>;
-			};
-		};
-	};
-
-	osc: oscillator {
-		compatible = "fixed-clock";
-		clock-output-names = "osc_25m";
-		#clock-cells = <0>;
-	};
-
-	soc {
-		compatible = "simple-bus";
-		interrupt-parent = <&plic>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		dma-noncoherent;
-		ranges;
-
-		uart0: serial@4140000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x04140000 0x100>;
-			interrupts = <44 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&osc>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			status = "disabled";
-		};
-
-		uart1: serial@4150000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x04150000 0x100>;
-			interrupts = <45 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&osc>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			status = "disabled";
-		};
-
-		uart2: serial@4160000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x04160000 0x100>;
-			interrupts = <46 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&osc>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			status = "disabled";
-		};
-
-		uart3: serial@4170000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x04170000 0x100>;
-			interrupts = <47 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&osc>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			status = "disabled";
-		};
-
-		uart4: serial@41c0000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x041c0000 0x100>;
-			interrupts = <48 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&osc>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			status = "disabled";
-		};
+};

-		plic: interrupt-controller@70000000 {
-			compatible = "sophgo,cv1800b-plic", "thead,c900-plic";
-			reg = <0x70000000 0x4000000>;
-			interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 9>;
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			riscv,ndev = <101>;
-		};
+&plic {
+	compatible = "sophgo,cv1800b-plic", "thead,c900-plic";
+};

-		clint: timer@74000000 {
-			compatible = "sophgo,cv1800b-clint", "thead,c900-clint";
-			reg = <0x74000000 0x10000>;
-			interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>;
-		};
-	};
+&clint {
+	compatible = "sophgo,cv1800b-clint", "thead,c900-clint";
  };
diff --git a/arch/riscv/boot/dts/sophgo/cv18xx.dtsi b/arch/riscv/boot/dts/sophgo/cv18xx.dtsi
new file mode 100644
index 000000000000..55d4bc84faa0
--- /dev/null
+++ b/arch/riscv/boot/dts/sophgo/cv18xx.dtsi
@@ -0,0 +1,120 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2023 Jisheng Zhang <jszhang@xxxxxxxxxx>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus: cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		timebase-frequency = <25000000>;
+
+		cpu0: cpu@0 {
+			compatible = "thead,c906", "riscv";
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-block-size = <64>;
+			d-cache-sets = <512>;
+			d-cache-size = <65536>;
+			i-cache-block-size = <64>;
+			i-cache-sets = <128>;
+			i-cache-size = <32768>;
+			mmu-type = "riscv,sv39";
+			riscv,isa = "rv64imafdc";
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "zicntr", "zicsr",
+					       "zifencei", "zihpm";
+
+			cpu0_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+			};
+		};
+	};
+
+	osc: oscillator {
+		compatible = "fixed-clock";
+		clock-output-names = "osc_25m";
+		#clock-cells = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&plic>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		dma-noncoherent;
+		ranges;
+
+		uart0: serial@4140000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x04140000 0x100>;
+			interrupts = <44 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart1: serial@4150000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x04150000 0x100>;
+			interrupts = <45 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart2: serial@4160000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x04160000 0x100>;
+			interrupts = <46 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart3: serial@4170000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x04170000 0x100>;
+			interrupts = <47 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart4: serial@41c0000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x041c0000 0x100>;
+			interrupts = <48 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		plic: interrupt-controller@70000000 {
+			reg = <0x70000000 0x4000000>;
+			interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 9>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			riscv,ndev = <101>;
+		};
+
+		clint: timer@74000000 {
+			reg = <0x74000000 0x10000>;
+			interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>;
+		};
+	};
+};
--
2.42.0





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux