Hi Caleb, kernel test robot noticed the following build errors: [auto build test ERROR on linus/master] [also build test ERROR on v6.6-rc6 next-20231018] [cannot apply to dtor-input/next dtor-input/for-linus] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in https://git-scm.com/docs/git-format-patch#_base_tree_information] url: https://github.com/intel-lab-lkp/linux/commits/Caleb-Connolly/Input-synaptics-rmi4-handle-duplicate-unknown-PDT-entries/20231017-132844 base: linus/master patch link: https://lore.kernel.org/r/20230929-caleb-rmi4-quirks-v2-7-b227ac498d88%40linaro.org patch subject: [PATCH v2 7/7] Input: synaptics-rmi4 - support fallback values for PDT descriptor bytes config: x86_64-rhel-8.3-rust (https://download.01.org/0day-ci/archive/20231019/202310190640.pxJQCbWc-lkp@xxxxxxxxx/config) compiler: clang version 16.0.4 (https://github.com/llvm/llvm-project.git ae42196bc493ffe877a7e3dff8be32035dea4d07) reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20231019/202310190640.pxJQCbWc-lkp@xxxxxxxxx/reproduce) If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags | Reported-by: kernel test robot <lkp@xxxxxxxxx> | Closes: https://lore.kernel.org/oe-kbuild-all/202310190640.pxJQCbWc-lkp@xxxxxxxxx/ All errors (new ones prefixed by >>): >> drivers/input/rmi4/rmi_driver.c:1223:32: error: incompatible pointer types passing 'struct rmi_device *' to parameter of type 'struct device *' [-Werror,-Wincompatible-pointer-types] retval = rmi_driver_of_probe(rmi_dev, pdata); ^~~~~~~ drivers/input/rmi4/rmi_driver.c:1101:54: note: passing argument to parameter 'dev' here static inline int rmi_driver_of_probe(struct device *dev, ^ 1 error generated. vim +1223 drivers/input/rmi4/rmi_driver.c 1199 1200 static int rmi_driver_probe(struct device *dev) 1201 { 1202 struct rmi_driver *rmi_driver; 1203 struct rmi_driver_data *data; 1204 struct rmi_device_platform_data *pdata; 1205 struct rmi_device *rmi_dev; 1206 int retval; 1207 1208 rmi_dbg(RMI_DEBUG_CORE, dev, "%s: Starting probe.\n", 1209 __func__); 1210 1211 if (!rmi_is_physical_device(dev)) { 1212 rmi_dbg(RMI_DEBUG_CORE, dev, "Not a physical device.\n"); 1213 return -ENODEV; 1214 } 1215 1216 rmi_dev = to_rmi_device(dev); 1217 rmi_driver = to_rmi_driver(dev->driver); 1218 rmi_dev->driver = rmi_driver; 1219 1220 pdata = rmi_get_platform_data(rmi_dev); 1221 1222 if (rmi_dev->xport->dev->of_node) { > 1223 retval = rmi_driver_of_probe(rmi_dev, pdata); 1224 if (retval) 1225 return retval; 1226 } 1227 1228 data = devm_kzalloc(dev, sizeof(struct rmi_driver_data), GFP_KERNEL); 1229 if (!data) 1230 return -ENOMEM; 1231 1232 INIT_LIST_HEAD(&data->function_list); 1233 data->rmi_dev = rmi_dev; 1234 dev_set_drvdata(&rmi_dev->dev, data); 1235 1236 /* 1237 * Right before a warm boot, the sensor might be in some unusual state, 1238 * such as F54 diagnostics, or F34 bootloader mode after a firmware 1239 * or configuration update. In order to clear the sensor to a known 1240 * state and/or apply any updates, we issue a initial reset to clear any 1241 * previous settings and force it into normal operation. 1242 * 1243 * We have to do this before actually building the PDT because 1244 * the reflash updates (if any) might cause various registers to move 1245 * around. 1246 * 1247 * For a number of reasons, this initial reset may fail to return 1248 * within the specified time, but we'll still be able to bring up the 1249 * driver normally after that failure. This occurs most commonly in 1250 * a cold boot situation (where then firmware takes longer to come up 1251 * than from a warm boot) and the reset_delay_ms in the platform data 1252 * has been set too short to accommodate that. Since the sensor will 1253 * eventually come up and be usable, we don't want to just fail here 1254 * and leave the customer's device unusable. So we warn them, and 1255 * continue processing. 1256 */ 1257 retval = rmi_scan_pdt(rmi_dev, NULL, rmi_initial_reset); 1258 if (retval < 0) 1259 dev_warn(dev, "RMI initial reset failed! Continuing in spite of this.\n"); 1260 1261 retval = rmi_read(rmi_dev, PDT_PROPERTIES_LOCATION, &data->pdt_props); 1262 if (retval < 0) { 1263 /* 1264 * we'll print out a warning and continue since 1265 * failure to get the PDT properties is not a cause to fail 1266 */ 1267 dev_warn(dev, "Could not read PDT properties from %#06x (code %d). Assuming 0x00.\n", 1268 PDT_PROPERTIES_LOCATION, retval); 1269 } 1270 1271 mutex_init(&data->irq_mutex); 1272 mutex_init(&data->enabled_mutex); 1273 1274 retval = rmi_probe_interrupts(data); 1275 if (retval) 1276 goto err; 1277 1278 if (rmi_dev->xport->input) { 1279 /* 1280 * The transport driver already has an input device. 1281 * In some cases it is preferable to reuse the transport 1282 * devices input device instead of creating a new one here. 1283 * One example is some HID touchpads report "pass-through" 1284 * button events are not reported by rmi registers. 1285 */ 1286 data->input = rmi_dev->xport->input; 1287 } else { 1288 data->input = devm_input_allocate_device(dev); 1289 if (!data->input) { 1290 dev_err(dev, "%s: Failed to allocate input device.\n", 1291 __func__); 1292 retval = -ENOMEM; 1293 goto err; 1294 } 1295 rmi_driver_set_input_params(rmi_dev, data->input); 1296 data->input->phys = devm_kasprintf(dev, GFP_KERNEL, 1297 "%s/input0", dev_name(dev)); 1298 } 1299 1300 retval = rmi_init_functions(data); 1301 if (retval) 1302 goto err; 1303 1304 retval = rmi_f34_create_sysfs(rmi_dev); 1305 if (retval) 1306 goto err; 1307 1308 if (data->input) { 1309 rmi_driver_set_input_name(rmi_dev, data->input); 1310 if (!rmi_dev->xport->input) { 1311 retval = input_register_device(data->input); 1312 if (retval) { 1313 dev_err(dev, "%s: Failed to register input device.\n", 1314 __func__); 1315 goto err_destroy_functions; 1316 } 1317 } 1318 } 1319 1320 retval = rmi_irq_init(rmi_dev); 1321 if (retval < 0) 1322 goto err_destroy_functions; 1323 1324 if (data->f01_container->dev.driver) { 1325 /* Driver already bound, so enable ATTN now. */ 1326 retval = rmi_enable_sensor(rmi_dev); 1327 if (retval) 1328 goto err_disable_irq; 1329 } 1330 1331 return 0; 1332 1333 err_disable_irq: 1334 rmi_disable_irq(rmi_dev, false); 1335 err_destroy_functions: 1336 rmi_free_function_list(rmi_dev); 1337 err: 1338 return retval; 1339 } 1340 -- 0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests/wiki
