On Wed, 18 Oct 2023 01:37:12 +0530
Jagath Jog J <jagathjog1996@xxxxxxxxx> wrote:
> Hi Matti,
>
> On Mon, Oct 24, 2022 at 6:10 PM Matti Vaittinen
> <mazziesaccount@xxxxxxxxx> wrote:
> >
> > KX022A is a 3-axis accelerometer from ROHM/Kionix. The sensor features
> > include variable ODRs, I2C and SPI control, FIFO/LIFO with watermark IRQ,
> > tap/motion detection, wake-up & back-to-sleep events, four acceleration
> > ranges (2, 4, 8 and 16g), and probably some other cool features.
>
> This is a nice driver, and I found it very helpful as a reference.
> One question regarding scale please see below.
>
> > + * range is typically +-2G/4G/8G/16G, distributed over the amount of bits.
> > + * The scale table can be calculated using
> > + * (range / 2^bits) * g = (range / 2^bits) * 9.80665 m/s^2
> > + * => KX022A uses 16 bit (HiRes mode - assume the low 8 bits are zeroed
> > + * in low-power mode(?) )
> > + * => +/-2G => 4 / 2^16 * 9,80665 * 10^6 (to scale to micro)
> > + * => +/-2G - 598.550415
> > + * +/-4G - 1197.10083
> > + * +/-8G - 2394.20166
> > + * +/-16G - 4788.40332
> > + */
> > +static const int kx022a_scale_table[][2] = {
> > + { 598, 550415 },
> > + { 1197, 100830 },
> > + { 2394, 201660 },
> > + { 4788, 403320 },
> > +};
>
> Given that the integer part is non-zero, and
> IIO_VAL_INT_PLUS_MICRO is returned for read_scale,
> As raw value will never be fractional how does this
> correspond to a reading of 9.8 m/s² for the Z-axis?
Definitely suspicious as should be in m/s^2 for an acceleration and
it should be
9.8*16/2^bits
So I think these are out by a factor of 10^6
>
> > +
> > +static int kx022a_read_avail(struct iio_dev *indio_dev,
> > + struct iio_chan_spec const *chan,
> > + const int **vals, int *type, int *length,
> > + long mask)
> > +{
> > + switch (mask) {
> > + case IIO_CHAN_INFO_SAMP_FREQ:
> > + *vals = (const int *)kx022a_accel_samp_freq_table;
> > + *length = ARRAY_SIZE(kx022a_accel_samp_freq_table) *
> > + ARRAY_SIZE(kx022a_accel_samp_freq_table[0]);
> > + *type = IIO_VAL_INT_PLUS_MICRO;
> > + return IIO_AVAIL_LIST;
> > + case IIO_CHAN_INFO_SCALE:
> > + *vals = (const int *)kx022a_scale_table;
> > + *length = ARRAY_SIZE(kx022a_scale_table) *
> > + ARRAY_SIZE(kx022a_scale_table[0]);
> > + *type = IIO_VAL_INT_PLUS_MICRO;
> > + return IIO_AVAIL_LIST;
> > + default:
> > + return -EINVAL;
> > + }
> > +}
>
> Regards
> Jagath
