On Wed, Oct 18, 2023 at 02:57:50PM +0100, Conor Dooley wrote: > On Tue, Oct 17, 2023 at 01:43:52PM -0700, Drew Fustini wrote: > > Add properties to the emmc node and enable it and set the frequency for > > the sdhci clock. > > > > Signed-off-by: Drew Fustini <dfustini@xxxxxxxxxxxx> > > --- > > arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts | 14 ++++++++++++++ > > 1 file changed, 14 insertions(+) > > > > diff --git a/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts b/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts > > index 70e8042c8304..bf55319ba950 100644 > > --- a/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts > > +++ b/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts > > @@ -52,6 +52,10 @@ &uart_sclk { > > clock-frequency = <100000000>; > > }; > > > > +&sdhci_clk { > > + clock-frequency = <198000000>; > > +}; > > + > > &dmac0 { > > status = "okay"; > > }; > > @@ -59,3 +63,13 @@ &dmac0 { > > &uart0 { > > status = "okay"; > > }; > > + > > +&mmc0 { > > + bus-width = <8>; > > + max-frequency = <198000000>; > > + mmc-hs400-1_8v; > > + non-removable; > > + no-sdio; > > + no-sd; > > + status = "okay"; > > +}; > > Is this file meant to be in alphanumerical order? > Good point, I should add the new nodes in alphabetical order. Thanks, Drew