From: Chris Morgan <macromorgan@xxxxxxxxxxx>
Add support for a PLL rate of 292.5MHz so that the Powkiddy RGB30 panel
can run at a requested 60hz (59.96, close enough).
I have confirmed this rate fits with all the constraints
listed in the TRM for the VPLL (as an integer PLL) in Part 1 "Chapter
2 Clock & Reset Unit (CRU)."
Signed-off-by: Chris Morgan <macromorgan@xxxxxxxxxxx>
---
drivers/clk/rockchip/clk-rk3568.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/clk/rockchip/clk-rk3568.c b/drivers/clk/rockchip/clk-rk3568.c
index 16dabe2b9c47..db713e1526cd 100644
--- a/drivers/clk/rockchip/clk-rk3568.c
+++ b/drivers/clk/rockchip/clk-rk3568.c
@@ -72,6 +72,7 @@ static struct rockchip_pll_rate_table rk3568_pll_rates[] = {
RK3036_PLL_RATE(408000000, 1, 68, 2, 2, 1, 0),
RK3036_PLL_RATE(312000000, 1, 78, 6, 1, 1, 0),
RK3036_PLL_RATE(297000000, 2, 99, 4, 1, 1, 0),
+ RK3036_PLL_RATE(292500000, 1, 195, 4, 4, 1, 0),
RK3036_PLL_RATE(241500000, 2, 161, 4, 2, 1, 0),
RK3036_PLL_RATE(216000000, 1, 72, 4, 2, 1, 0),
RK3036_PLL_RATE(200000000, 1, 100, 3, 4, 1, 0),
--
2.34.1
