Hi Luca,
On Fri, Oct 13, 2023 at 01:38:06PM +0200, Luca Weiss wrote:
> On some hardware designs the AUX+/- lanes are connected reversed to
> SBU1/2 compared to the expected design by FSA4480.
>
> Made more complicated, the otherwise compatible Orient-Chip OCP96011
> expects the lanes to be connected reversed compared to FSA4480.
>
> * FSA4480 block diagram shows AUX+ connected to SBU2 and AUX- to SBU1.
> * OCP96011 block diagram shows AUX+ connected to SBU1 and AUX- to SBU2.
>
> So if OCP96011 is used as drop-in for FSA4480 then the orientation
> handling in the driver needs to be reversed to match the expectation of
> the OCP96011 hardware.
>
> Support parsing the data-lanes parameter in the endpoint node to swap
> this in the driver.
>
> The parse_data_lanes_mapping function is mostly taken from nb7vpq904m.c.
>
> Signed-off-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
> ---
> drivers/usb/typec/mux/fsa4480.c | 81 +++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 81 insertions(+)
>
> diff --git a/drivers/usb/typec/mux/fsa4480.c b/drivers/usb/typec/mux/fsa4480.c
> index e0ee1f621abb..6ee467c96fb6 100644
> --- a/drivers/usb/typec/mux/fsa4480.c
> +++ b/drivers/usb/typec/mux/fsa4480.c
> @@ -9,6 +9,7 @@
> #include <linux/kernel.h>
> #include <linux/module.h>
> #include <linux/mutex.h>
> +#include <linux/of_graph.h>
If you don't mind, let's keep this driver ready for ACPI, just in
case...
> #include <linux/regmap.h>
> #include <linux/usb/typec_dp.h>
> #include <linux/usb/typec_mux.h>
> @@ -60,6 +61,7 @@ struct fsa4480 {
> unsigned int svid;
>
> u8 cur_enable;
> + bool swap_sbu_lanes;
> };
>
> static const struct regmap_config fsa4480_regmap_config = {
> @@ -76,6 +78,9 @@ static int fsa4480_set(struct fsa4480 *fsa)
> u8 enable = FSA4480_ENABLE_DEVICE;
> u8 sel = 0;
>
> + if (fsa->swap_sbu_lanes)
> + reverse = !reverse;
> +
> /* USB Mode */
> if (fsa->mode < TYPEC_STATE_MODAL ||
> (!fsa->svid && (fsa->mode == TYPEC_MODE_USB2 ||
> @@ -179,12 +184,84 @@ static int fsa4480_mux_set(struct typec_mux_dev *mux, struct typec_mux_state *st
> return ret;
> }
>
> +enum {
> + NORMAL_LANE_MAPPING,
> + INVERT_LANE_MAPPING,
> +};
> +
> +#define DATA_LANES_COUNT 2
> +
> +static const int supported_data_lane_mapping[][DATA_LANES_COUNT] = {
> + [NORMAL_LANE_MAPPING] = { 0, 1 },
> + [INVERT_LANE_MAPPING] = { 1, 0 },
> +};
> +
> +static int fsa4480_parse_data_lanes_mapping(struct fsa4480 *fsa)
> +{
> + struct device_node *ep;
struct fwnode_handle *ep;
> + u32 data_lanes[DATA_LANES_COUNT];
> + int ret, i, j;
> +
> + ep = of_graph_get_next_endpoint(fsa->client->dev.of_node, NULL);
Shouldn't you loop through the endpoints? In any case:
ep = fwnode_graph_get_next_endpoint(dev_fwnode(&fsa->client->dev, NULL));
> + if (!ep)
> + return 0;
> +
> + ret = of_property_count_u32_elems(ep, "data-lanes");
ret = fwnode_property_count_u32(ep, "data-lanes");
But is this necessary at all in this case - why not just read the
array since you expect a fixed size for it (if the read fails it fails)?
> + if (ret == -EINVAL)
> + /* Property isn't here, consider default mapping */
> + goto out_done;
> + if (ret < 0)
> + goto out_error;
> +
> + if (ret != DATA_LANES_COUNT) {
> + dev_err(&fsa->client->dev, "expected 2 data lanes\n");
> + ret = -EINVAL;
> + goto out_error;
> + }
> +
> + ret = of_property_read_u32_array(ep, "data-lanes", data_lanes, DATA_LANES_COUNT);
ret = fwnode_property_read_u32_array(ep, "data-lanes", data_lanes, DATA_LANES_COUNT);
> + if (ret)
> + goto out_error;
> +
> + for (i = 0; i < ARRAY_SIZE(supported_data_lane_mapping); i++) {
> + for (j = 0; j < DATA_LANES_COUNT; j++) {
> + if (data_lanes[j] != supported_data_lane_mapping[i][j])
> + break;
> + }
> +
> + if (j == DATA_LANES_COUNT)
> + break;
> + }
> +
> + switch (i) {
> + case NORMAL_LANE_MAPPING:
> + break;
> + case INVERT_LANE_MAPPING:
> + fsa->swap_sbu_lanes = true;
> + dev_info(&fsa->client->dev, "using inverted data lanes mapping\n");
That is just noise. Please drop it.
> + break;
> + default:
> + dev_err(&fsa->client->dev, "invalid data lanes mapping\n");
> + ret = -EINVAL;
> + goto out_error;
> + }
> +
> +out_done:
> + ret = 0;
> +
> +out_error:
> + of_node_put(ep);
> +
> + return ret;
> +}
> +
> static int fsa4480_probe(struct i2c_client *client)
> {
> struct device *dev = &client->dev;
> struct typec_switch_desc sw_desc = { };
> struct typec_mux_desc mux_desc = { };
> struct fsa4480 *fsa;
> + int ret;
>
> fsa = devm_kzalloc(dev, sizeof(*fsa), GFP_KERNEL);
> if (!fsa)
> @@ -193,6 +270,10 @@ static int fsa4480_probe(struct i2c_client *client)
> fsa->client = client;
> mutex_init(&fsa->lock);
>
> + ret = fsa4480_parse_data_lanes_mapping(fsa);
> + if (ret)
> + return ret;
> +
> fsa->regmap = devm_regmap_init_i2c(client, &fsa4480_regmap_config);
> if (IS_ERR(fsa->regmap))
> return dev_err_probe(dev, PTR_ERR(fsa->regmap), "failed to initialize regmap\n");
>
> --
> 2.42.0
--
heikki
