On 9/21/23 09:02, Jason-ch Chen wrote:
From: jason-ch chen <Jason-ch.Chen@xxxxxxxxxxxx>
MT8188 is a SoC based on 64bit ARMv8 architecture. It contains 6 CA55
and 2 CA78 cores. MT8188 share many HW IP with MT65xx series.
We add basic chip support for MediaTek MT8188 on evaluation board.
Signed-off-by: jason-ch chen <Jason-ch.Chen@xxxxxxxxxxxx>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
---
arch/arm64/boot/dts/mediatek/Makefile | 1 +
arch/arm64/boot/dts/mediatek/mt8188-evb.dts | 400 ++++++++
arch/arm64/boot/dts/mediatek/mt8188.dtsi | 951 ++++++++++++++++++++
3 files changed, 1352 insertions(+)
create mode 100644 arch/arm64/boot/dts/mediatek/mt8188-evb.dts
create mode 100644 arch/arm64/boot/dts/mediatek/mt8188.dtsi
[...]
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "simple-bus";
+ ranges;
+
+ gic: interrupt-controller@c000000 {
Hi Jason,
arch/arm64/boot/dts/mediatek/mt8188.dtsi:320.37-341.5: Warning
(avoid_unnecessary_addr_size): /soc/interrupt-controller@c000000:
unnecessary #address-cells/#size-cells without "ranges" or child "reg"
property
This warning pops up when trying dtbs_check.
Can you have a look please ?
Eugen
+ compatible = "arm,gic-v3";
+ #interrupt-cells = <4>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ #redistributor-regions = <1>;
+ interrupt-parent = <&gic>;
+ interrupt-controller;
+ reg = <0 0x0c000000 0 0x40000>,
+ <0 0x0c040000 0 0x200000>;
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
+
+ ppi-partitions {
+ ppi_cluster0: interrupt-partition-0 {
+ affinity = <&cpu0 &cpu1 &cpu2 &cpu3 &cpu4 &cpu5>;
+ };
+
+ ppi_cluster1: interrupt-partition-1 {
+ affinity = <&cpu6 &cpu7>;
+ };
+ };
+ };
+
[...]
