On Wed, Oct 04, 2023 at 09:12:30PM +0200, Robert Marko wrote:
> Add the required BAM and QUP nodes for the QUP1 SPI controller on IPQ5018.
>
> Signed-off-by: Robert Marko <robimarko@xxxxxxxxx>
I padded the spi node to 8 digits, and applied the patch.
Thanks,
Bjorn
> ---
> arch/arm64/boot/dts/qcom/ipq5018.dtsi | 24 ++++++++++++++++++++++++
> 1 file changed, 24 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
> index 38ffdc3cbdcd..484034e65f4f 100644
> --- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
> @@ -146,6 +146,16 @@ sdhc_1: mmc@7804000 {
> status = "disabled";
> };
>
> + blsp_dma: dma-controller@7884000 {
> + compatible = "qcom,bam-v1.7.0";
> + reg = <0x07884000 0x1d000>;
> + interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&gcc GCC_BLSP1_AHB_CLK>;
> + clock-names = "bam_clk";
> + #dma-cells = <1>;
> + qcom,ee = <0>;
> + };
> +
> blsp1_uart1: serial@78af000 {
> compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
> reg = <0x078af000 0x200>;
> @@ -156,6 +166,20 @@ blsp1_uart1: serial@78af000 {
> status = "disabled";
> };
>
> + blsp1_spi1: spi@78b5000 {
> + compatible = "qcom,spi-qup-v2.2.1";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x78b5000 0x600>;
> + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
> + <&gcc GCC_BLSP1_AHB_CLK>;
> + clock-names = "core", "iface";
> + dmas = <&blsp_dma 4>, <&blsp_dma 5>;
> + dma-names = "tx", "rx";
> + status = "disabled";
> + };
> +
> intc: interrupt-controller@b000000 {
> compatible = "qcom,msm-qgic2";
> reg = <0x0b000000 0x1000>, /* GICD */
> --
> 2.41.0
>
