[PATCH v4] dt-bindings: usb: gpio-sbu-mux: Make 'mode-switch' not required

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Fabio Estevam <festevam@xxxxxxx>

On a i.MX8QXP MEK board that has an NXP CBDTU02043 mux, there is
no mode-switch support, only orientation switch.

Make the 'mode-switch' property a non-required one.

Signed-off-by: Fabio Estevam <festevam@xxxxxxx>
Acked-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
---
Changes since v3:
- Collected Conor's ack and sent it as standalone patch as the
previous patch has already been applied.

 Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml | 1 -
 1 file changed, 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml b/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml
index b61dcf8b4aad..d3b2b666ec2a 100644
--- a/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml
+++ b/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml
@@ -51,7 +51,6 @@ required:
   - compatible
   - enable-gpios
   - select-gpios
-  - mode-switch
   - orientation-switch
   - port
 
-- 
2.34.1





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux