[PATCH net-next v3 4/6] ARM: dts: marvell: Fix some common switch mistakes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Fix some errors in the Marvell MV88E6xxx switch descriptions:
- The top node had no address size or cells.
- switch0@0 is not OK, should be switch@0.
- port@a is not normal port naming, use decimal port@10.
- The ports node should have port@0 etc children, no
  plural "ports".

This serves as an example of fixes needed for introducing a
schema for the bindings, but the patch can simply be applied.

Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
 arch/arm/boot/dts/marvell/armada-370-rd.dts              |  2 --
 .../arm/boot/dts/marvell/armada-381-netgear-gs110emx.dts |  6 ++----
 arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-l8.dts |  2 +-
 arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-s4.dts |  2 +-
 arch/arm/boot/dts/marvell/armada-385-linksys.dtsi        |  2 --
 arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts    | 16 +++++++---------
 arch/arm/boot/dts/marvell/armada-388-clearfog.dts        |  2 --
 arch/arm/boot/dts/marvell/armada-xp-linksys-mamba.dts    |  2 --
 8 files changed, 11 insertions(+), 23 deletions(-)

diff --git a/arch/arm/boot/dts/marvell/armada-370-rd.dts b/arch/arm/boot/dts/marvell/armada-370-rd.dts
index b459a670f615..e3a1834986ee 100644
--- a/arch/arm/boot/dts/marvell/armada-370-rd.dts
+++ b/arch/arm/boot/dts/marvell/armada-370-rd.dts
@@ -151,8 +151,6 @@ led@0 {
 
 	switch: switch@10 {
 		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		reg = <0x10>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
diff --git a/arch/arm/boot/dts/marvell/armada-381-netgear-gs110emx.dts b/arch/arm/boot/dts/marvell/armada-381-netgear-gs110emx.dts
index f4c4b213ef4e..cf37f53ec070 100644
--- a/arch/arm/boot/dts/marvell/armada-381-netgear-gs110emx.dts
+++ b/arch/arm/boot/dts/marvell/armada-381-netgear-gs110emx.dts
@@ -79,14 +79,12 @@ &mdio {
 
 	switch@0 {
 		compatible = "marvell,mv88e6190";
-		#address-cells = <1>;
 		#interrupt-cells = <2>;
 		interrupt-controller;
 		interrupt-parent = <&gpio1>;
 		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-0 = <&switch_interrupt_pins>;
 		pinctrl-names = "default";
-		#size-cells = <0>;
 		reg = <0>;
 
 		mdio {
@@ -214,12 +212,12 @@ port@9 {
 				reg = <9>;
 			};
 
-			port@a {
+			port@10 {
 				/* 88X3310P external phy */
 				label = "lan10";
 				phy-handle = <&phy2>;
 				phy-mode = "xaui";
-				reg = <0xa>;
+				reg = <10>;
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-l8.dts b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-l8.dts
index 1990f7d0cc79..1be0419f8f3e 100644
--- a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-l8.dts
+++ b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-l8.dts
@@ -7,7 +7,7 @@ / {
 };
 
 &mdio {
-	switch0: switch0@4 {
+	switch0: switch@4 {
 		compatible = "marvell,mv88e6190";
 		reg = <4>;
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-s4.dts b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-s4.dts
index b795ad573891..6ec536222bfb 100644
--- a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-s4.dts
+++ b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-s4.dts
@@ -11,7 +11,7 @@ &sfp0 {
 };
 
 &mdio {
-	switch0: switch0@4 {
+	switch0: switch@4 {
 		compatible = "marvell,mv88e6085";
 		reg = <4>;
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/marvell/armada-385-linksys.dtsi b/arch/arm/boot/dts/marvell/armada-385-linksys.dtsi
index fc8216fd9f60..63a0bc9455ca 100644
--- a/arch/arm/boot/dts/marvell/armada-385-linksys.dtsi
+++ b/arch/arm/boot/dts/marvell/armada-385-linksys.dtsi
@@ -160,8 +160,6 @@ &mdio {
 
 	switch@0 {
 		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		reg = <0>;
 
 		ports {
diff --git a/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts b/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts
index 2d8d319bec83..8c69dbd6a2c7 100644
--- a/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts
+++ b/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts
@@ -439,8 +439,6 @@ switch@10 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&swint_pins>;
 		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		dsa,member = <0 0>;
 		reg = <0x10>;
@@ -452,32 +450,32 @@ ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			ports@0 {
+			port@0 {
 				reg = <0>;
 				label = "lan0";
 			};
 
-			ports@1 {
+			port@1 {
 				reg = <1>;
 				label = "lan1";
 			};
 
-			ports@2 {
+			port@2 {
 				reg = <2>;
 				label = "lan2";
 			};
 
-			ports@3 {
+			port@3 {
 				reg = <3>;
 				label = "lan3";
 			};
 
-			ports@4 {
+			port@4 {
 				reg = <4>;
 				label = "lan4";
 			};
 
-			ports@5 {
+			port@5 {
 				reg = <5>;
 				ethernet = <&eth1>;
 				phy-mode = "rgmii-id";
@@ -488,7 +486,7 @@ fixed-link {
 				};
 			};
 
-			ports@6 {
+			port@6 {
 				reg = <6>;
 				ethernet = <&eth0>;
 				phy-mode = "rgmii-id";
diff --git a/arch/arm/boot/dts/marvell/armada-388-clearfog.dts b/arch/arm/boot/dts/marvell/armada-388-clearfog.dts
index 32c569df142f..ab46903580aa 100644
--- a/arch/arm/boot/dts/marvell/armada-388-clearfog.dts
+++ b/arch/arm/boot/dts/marvell/armada-388-clearfog.dts
@@ -94,8 +94,6 @@ &mdio {
 
 	switch@4 {
 		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		reg = <4>;
 		pinctrl-0 = <&clearfog_dsa0_clk_pins &clearfog_dsa0_pins>;
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/marvell/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/marvell/armada-xp-linksys-mamba.dts
index 7a0614fd0c93..2a5518c73bff 100644
--- a/arch/arm/boot/dts/marvell/armada-xp-linksys-mamba.dts
+++ b/arch/arm/boot/dts/marvell/armada-xp-linksys-mamba.dts
@@ -267,8 +267,6 @@ &mdio {
 
 	switch@0 {
 		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		reg = <0>;
 
 		ports {

-- 
2.34.1





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux