On Mon, 16 Oct 2023 09:02:04 +0200, werneazc@xxxxxxxxx wrote: > From: Andre Werner <andre.werner@xxxxxxxxxxxxxxxxxxxxx> > > Add basic description for ADS7038 ADC devices. > The devicetree adds the following device specific options: > > - average-samples: Program device's programmable average filter. > - crc-enabled: Enable the CRC check for SPI transfers. Sadly, this > option has currently no effect in the driver. > - status-enabled: Enable the appending of the device's status on the > measure value transmission. > - gpio-controller: Sadly function not implemented yet in the driver. > > Signed-off-by: Andre Werner <andre.werner@xxxxxxxxxxxxxxxxxxxxx> > --- > v3 > - Delete ADS7138 compatible and comments. > - Add options for CRC, status and average samples as well as > gpio-controller. > - Update example. > - add regulator for digital IO voltage. > --- > .../bindings/iio/adc/ti,ads7038.yaml | 83 +++++++++++++++++++ > 1 file changed, 83 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/adc/ti,ads7038.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/adc/ti,ads7038.yaml: status-enabled: missing type definition /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/adc/ti,ads7038.yaml: crc-enabled: missing type definition doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20231016070318.28355-1-andre.werner@xxxxxxxxxxxxxxxxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
