Fix some errors in the Marvell MV88E6xxx switch descriptions:
- The top node had no address size or cells.
- switch0@0 is not OK, should be switch@0.
- port@a is not normal port naming, use decimal port@10.
Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
.../boot/dts/marvell/armada-3720-espressobin.dtsi | 4 +--
.../boot/dts/marvell/armada-3720-gl-mv1000.dts | 4 +--
.../boot/dts/marvell/armada-3720-turris-mox.dts | 32 +++++++++++-----------
.../boot/dts/marvell/armada-7040-mochabin.dts | 2 --
.../dts/marvell/armada-8040-clearfog-gt-8k.dts | 2 +-
arch/arm64/boot/dts/marvell/cn9130-crb.dtsi | 6 ++--
6 files changed, 21 insertions(+), 29 deletions(-)
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi
index 5fc613d24151..b526efeee293 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi
@@ -145,10 +145,8 @@ &usb2 {
};
&mdio {
- switch0: switch0@1 {
+ switch0: switch@1 {
compatible = "marvell,mv88e6085";
- #address-cells = <1>;
- #size-cells = <0>;
reg = <1>;
dsa,member = <0 0>;
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts b/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts
index b1b45b4fa9d4..5de4417f929c 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts
@@ -152,10 +152,8 @@ &uart0 {
};
&mdio {
- switch0: switch0@1 {
+ switch0: switch@1 {
compatible = "marvell,mv88e6085";
- #address-cells = <1>;
- #size-cells = <0>;
reg = <1>;
dsa,member = <0 0>;
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
index 9eab2bb22134..ea66ba5a9762 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
@@ -305,7 +305,7 @@ phy1: ethernet-phy@1 {
};
/* switch nodes are enabled by U-Boot if modules are present */
- switch0@10 {
+ switch@10 {
compatible = "marvell,mv88e6190";
reg = <0x10>;
dsa,member = <0 0>;
@@ -410,8 +410,8 @@ port@9 {
managed = "in-band-status";
};
- switch0port10: port@a {
- reg = <0xa>;
+ switch0port10: port@10 {
+ reg = <10>;
label = "dsa";
phy-mode = "2500base-x";
managed = "in-band-status";
@@ -419,8 +419,8 @@ switch0port10: port@a {
status = "disabled";
};
- port-sfp@a {
- reg = <0xa>;
+ port-sfp@10 {
+ reg = <10>;
label = "sfp";
sfp = <&sfp>;
phy-mode = "sgmii";
@@ -430,7 +430,7 @@ port-sfp@a {
};
};
- switch0@2 {
+ switch@2 {
compatible = "marvell,mv88e6085";
reg = <0x2>;
dsa,member = <0 0>;
@@ -497,7 +497,7 @@ port@5 {
};
};
- switch1@11 {
+ switch@11 {
compatible = "marvell,mv88e6190";
reg = <0x11>;
dsa,member = <0 1>;
@@ -602,8 +602,8 @@ switch1port9: port@9 {
link = <&switch0port10>;
};
- switch1port10: port@a {
- reg = <0xa>;
+ switch1port10: port@10 {
+ reg = <10>;
label = "dsa";
phy-mode = "2500base-x";
managed = "in-band-status";
@@ -611,8 +611,8 @@ switch1port10: port@a {
status = "disabled";
};
- port-sfp@a {
- reg = <0xa>;
+ port-sfp@10 {
+ reg = <10>;
label = "sfp";
sfp = <&sfp>;
phy-mode = "sgmii";
@@ -622,7 +622,7 @@ port-sfp@a {
};
};
- switch1@2 {
+ switch@2 {
compatible = "marvell,mv88e6085";
reg = <0x2>;
dsa,member = <0 1>;
@@ -689,7 +689,7 @@ port@5 {
};
};
- switch2@12 {
+ switch@12 {
compatible = "marvell,mv88e6190";
reg = <0x12>;
dsa,member = <0 2>;
@@ -794,8 +794,8 @@ switch2port9: port@9 {
link = <&switch1port10 &switch0port10>;
};
- port-sfp@a {
- reg = <0xa>;
+ port-sfp@10 {
+ reg = <10>;
label = "sfp";
sfp = <&sfp>;
phy-mode = "sgmii";
@@ -805,7 +805,7 @@ port-sfp@a {
};
};
- switch2@2 {
+ switch@2 {
compatible = "marvell,mv88e6085";
reg = <0x2>;
dsa,member = <0 2>;
diff --git a/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts b/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts
index 48202810bf78..3cc794fcf12e 100644
--- a/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts
@@ -303,8 +303,6 @@ eth2phy: ethernet-phy@1 {
/* 88E6141 Topaz switch */
switch: switch@3 {
compatible = "marvell,mv88e6085";
- #address-cells = <1>;
- #size-cells = <0>;
reg = <3>;
pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
index 4125202028c8..7a25ea36b565 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
@@ -497,7 +497,7 @@ ge_phy: ethernet-phy@0 {
reset-deassert-us = <10000>;
};
- switch0: switch0@4 {
+ switch0: switch@4 {
compatible = "marvell,mv88e6085";
reg = <4>;
pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi b/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi
index 32cfb3e2efc3..2f6281b66467 100644
--- a/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi
+++ b/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi
@@ -207,11 +207,9 @@ phy0: ethernet-phy@0 {
reg = <0>;
};
- switch6: switch0@6 {
+ switch6: switch@6 {
/* Actual device is MV88E6393X */
compatible = "marvell,mv88e6190";
- #address-cells = <1>;
- #size-cells = <0>;
reg = <6>;
interrupt-parent = <&cp0_gpio1>;
interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
@@ -280,7 +278,7 @@ port@9 {
managed = "in-band-status";
};
- port@a {
+ port@10 {
reg = <10>;
ethernet = <&cp0_eth0>;
phy-mode = "10gbase-r";
--
2.34.1
