Re: [PATCH v2 00/13] thermal: tegra: Do not register cooling device

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Oct 13, 2023 at 02:45:57PM +0200, Nicolas Chauvet wrote:
> Le ven. 13 oct. 2023 à 13:43, Thierry Reding
> <thierry.reding@xxxxxxxxx> a écrit :
> >
> > On Fri, Oct 13, 2023 at 11:14:25AM +0200, Nicolas Chauvet wrote:
> > > Le jeu. 12 oct. 2023 à 19:58, Thierry Reding
> > > <thierry.reding@xxxxxxxxx> a écrit :
> > > >
> > > > From: Thierry Reding <treding@xxxxxxxxxx>
> > > >
> > > > Hi,
> > > >
> > > > this set of patches removes the registration of the SOCTHERM internal
> > > > throttling mechanism as cooling device. Since this throttling starts
> > > > automatically once a certain temperature threshold is crossed, it
> > > > doesn't make sense to represent it as a cooling device, which are
> > > > typically "manually" activated by the thermal framework when thermal
> > > > sensors report temperature thresholds being crossed.
> > > >
> > > > Instead of using the cooling device mechanism, this statically programs
> > > > the throttling mechanism when it is configured in device tree. In order
> > > > to do this, an additional device tree property is needed to replace the
> > > > information that was previously contained in trip points.
> > > >
> > > > There's a few preparatory patches to make the removal a bit simpler and
> > > > also some follow up cleanups included as well.
> > > >
> > > > Changes in v2:
> > > > - rework the device tree bindings:
> > > >   - add nvidia,thermal-zones property to attach throttling to zones
> > > >   - use -millicelsius suffix and add hysteresis
> > > > - add patch to store thermal zone device tree node for later use
> > > > - add patch to enforce self-encapsulation of the thermal core now that
> > > >   no drivers need to reach into it anymore
> > > >
> > > > This applies on top of Daniel's self-encapsulation hardening series:
> > > >
> > > >         https://lore.kernel.org/all/20231012102700.2858952-1-daniel.lezcano@xxxxxxxxxx/
> > > >
> > > > Thierry
> > > >
> > > > Thierry Reding (13):
> > > >   thermal: Store device tree node for thermal zone devices
> > > >   dt-bindings: thermal: tegra: Document throttle temperature
> > > >   dt-bindings: thermal: tegra: Add nvidia,thermal-zones property
> > > >   thermal: tegra: Use driver-private data consistently
> > > >   thermal: tegra: Constify SoC-specific data
> > > >   thermal: tegra: Do not register cooling device
> > > >   thermal: tegra: Use unsigned int where appropriate
> > > >   thermal: tegra: Avoid over-allocation of temporary array
> > > >   thermal: tegra: Remove gratuitous error assignment
> > > >   thermal: tegra: Minor stylistic cleanups
> > > >   ARM: tegra: Rework SOCTHERM on Tegra124
> > > >   arm64: tegra: Rework SOCTHERM on Tegra132 and Tegra210
> > > >   thermal: Enforce self-encapsulation
> > > >
> > > >  .../thermal/nvidia,tegra124-soctherm.yaml     |  19 +
> > > >  arch/arm/boot/dts/nvidia/tegra124.dtsi        |  68 +--
> > > >  arch/arm64/boot/dts/nvidia/tegra132.dtsi      |  66 +--
> > > >  arch/arm64/boot/dts/nvidia/tegra210.dtsi      |  86 +--
> > > >  drivers/thermal/tegra/soctherm.c              | 525 ++++++++----------
> > > >  drivers/thermal/tegra/soctherm.h              |   1 +
> > > >  drivers/thermal/tegra/tegra124-soctherm.c     |   4 +
> > > >  drivers/thermal/tegra/tegra132-soctherm.c     |   4 +
> > > >  drivers/thermal/tegra/tegra210-soctherm.c     |   4 +
> > > >  drivers/thermal/thermal_core.h                |   2 +-
> > > >  drivers/thermal/thermal_of.c                  |   3 +
> > > >  11 files changed, 329 insertions(+), 453 deletions(-)
> > > >
> > > > --
> > > > 2.42.0
> > > >
> > >
> > > I'm still experiencing the following message on jetson-tx1 with this
> > > serie applied on top of 6.6-rc5 (with iommu-next and tegra-next
> > > applied).
> > > oct. 13 10:53:16 jetson-tx1 kernel: max77620-thermal max77620-thermal:
> > > Failed to register thermal zone: -19
> >
> > Not sure about this one. I don't think I've seen it. Do you know if
> > that's somehow caused by this series, or is it preexisting?
> 
> It's pre-existing from this serie.
> 
> > > oct. 13 10:53:16 jetson-tx1 kernel: tegra_soctherm
> > > 700e2000.thermal-sensor: throttle-cfg: heavy: no throt prop or invalid
> > > prop
> > >
> > > Is this expected ?
> >
> > This one is definitely not expected. I have seen this before, and it
> > happens when the device tree doesn't contain all the properties that are
> > expected. Patch 12 in this series should take care of that. Have you
> > made sure that that's been applied and is what the kernel uses to boot
> > with?
> 
> Yes, this dtb change in patch12 is propagated to the device (as seen
> in /boot/dtbs)
> But comparing with what's available at runtime in /proc/device-tree, I
> see some changes
> 
>                         heavy {
> -                               hysteresis-millicelsius = <0xfa0>;
> +                               #cooling-cells = <0x02>;
>                                 nvidia,cpu-throt-percent = <0x55>;
>                                 nvidia,gpu-throt-level = <0x03>;
>                                 nvidia,priority = <0x64>;
> -                               nvidia,thermal-zones = <0x49 0x4a>;
> -                               temperature-millicelsius = <0x180c4>;
> +                               phandle = <0x130>;
>                         };

Okay, that explains the error message.

> 
> I'm using u-boot 2023.07 with EFI boot (L4T 32.7.4).
> Could it be that the bootloader has changed these entries ? Can this
> be prevented ?

I'm not aware of anything in the bootloader that would do this. Some
versions of U-Boot that ships with L4T can copy certain nodes in DTB but
I have never seen anything that would've touched thermal.

Is it possible that you're not loading the DTB and end up receiving one
from UEFI or cboot?

> (MAC ethernet address is set as appropropriate).

That's a completely separate mechanism and shouldn't touch thermal at
all.

Thierry

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux