Re: [PATCH v2 6/7] riscv: dts: sophgo: Separate common devices from cv1800b soc

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Sorry for the wrong title.

>Yo,
>
>On Mon, Oct 09, 2023 at 07:26:35PM +0800, Inochi Amaoto wrote:
>> Move the cpu and the common peripherals of CV181x and CV180x to new file.
>>
>> Signed-off-by: Inochi Amaoto <inochiama@xxxxxxxxxxx>
>> ---
>>  arch/riscv/boot/dts/sophgo/cv1800b.dtsi       | 95 +------------------
>>  .../dts/sophgo/{cv1800b.dtsi => cv180x.dtsi}  | 19 +---
>>  2 files changed, 2 insertions(+), 112 deletions(-)
>>  copy arch/riscv/boot/dts/sophgo/{cv1800b.dtsi => cv180x.dtsi} (80%)
>>
>> diff --git a/arch/riscv/boot/dts/sophgo/cv1800b.dtsi b/arch/riscv/boot/dts/sophgo/cv1800b.dtsi
>> index df40e87ee063..0904154f9829 100644
>> --- a/arch/riscv/boot/dts/sophgo/cv1800b.dtsi
>> +++ b/arch/riscv/boot/dts/sophgo/cv1800b.dtsi
>> @@ -3,106 +3,13 @@
>>   * Copyright (C) 2023 Jisheng Zhang <jszhang@xxxxxxxxxx>
>>   */
>>
>> -#include <dt-bindings/interrupt-controller/irq.h>
>> +#include "cv180x.dtsi"
>>
>>  / {
>>  	compatible = "sophgo,cv1800b";
>> -	#address-cells = <1>;
>> -	#size-cells = <1>;
>> -
>> -	cpus: cpus {
>> -		#address-cells = <1>;
>> -		#size-cells = <0>;
>> -		timebase-frequency = <25000000>;
>> -
>> -		cpu0: cpu@0 {
>> -			compatible = "thead,c906", "riscv";
>> -			device_type = "cpu";
>> -			reg = <0>;
>> -			d-cache-block-size = <64>;
>> -			d-cache-sets = <512>;
>> -			d-cache-size = <65536>;
>> -			i-cache-block-size = <64>;
>> -			i-cache-sets = <128>;
>> -			i-cache-size = <32768>;
>> -			mmu-type = "riscv,sv39";
>> -			riscv,isa = "rv64imafdc";
>> -			riscv,isa-base = "rv64i";
>> -			riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "zicntr", "zicsr",
>> -					       "zifencei", "zihpm";
>> -
>> -			cpu0_intc: interrupt-controller {
>> -				compatible = "riscv,cpu-intc";
>> -				interrupt-controller;
>> -				#address-cells = <0>;
>> -				#interrupt-cells = <1>;
>> -			};
>> -		};
>> -	};
>> -
>> -	osc: oscillator {
>> -		compatible = "fixed-clock";
>> -		clock-output-names = "osc_25m";
>> -		#clock-cells = <0>;
>> -	};
>>
>>  	soc {
>> -		compatible = "simple-bus";
>>  		interrupt-parent = <&plic>;
>> -		#address-cells = <1>;
>> -		#size-cells = <1>;
>> -		dma-noncoherent;
>> -		ranges;
>> -
>> -		uart0: serial@4140000 {
>> -			compatible = "snps,dw-apb-uart";
>> -			reg = <0x04140000 0x100>;
>> -			interrupts = <44 IRQ_TYPE_LEVEL_HIGH>;
>> -			clocks = <&osc>;
>> -			reg-shift = <2>;
>> -			reg-io-width = <4>;
>> -			status = "disabled";
>> -		};
>> -
>> -		uart1: serial@4150000 {
>> -			compatible = "snps,dw-apb-uart";
>> -			reg = <0x04150000 0x100>;
>> -			interrupts = <45 IRQ_TYPE_LEVEL_HIGH>;
>> -			clocks = <&osc>;
>> -			reg-shift = <2>;
>> -			reg-io-width = <4>;
>> -			status = "disabled";
>> -		};
>> -
>> -		uart2: serial@4160000 {
>> -			compatible = "snps,dw-apb-uart";
>> -			reg = <0x04160000 0x100>;
>> -			interrupts = <46 IRQ_TYPE_LEVEL_HIGH>;
>> -			clocks = <&osc>;
>> -			reg-shift = <2>;
>> -			reg-io-width = <4>;
>> -			status = "disabled";
>> -		};
>> -
>> -		uart3: serial@4170000 {
>> -			compatible = "snps,dw-apb-uart";
>> -			reg = <0x04170000 0x100>;
>> -			interrupts = <47 IRQ_TYPE_LEVEL_HIGH>;
>> -			clocks = <&osc>;
>> -			reg-shift = <2>;
>> -			reg-io-width = <4>;
>> -			status = "disabled";
>> -		};
>> -
>> -		uart4: serial@41c0000 {
>> -			compatible = "snps,dw-apb-uart";
>> -			reg = <0x041c0000 0x100>;
>> -			interrupts = <48 IRQ_TYPE_LEVEL_HIGH>;
>> -			clocks = <&osc>;
>> -			reg-shift = <2>;
>> -			reg-io-width = <4>;
>> -			status = "disabled";
>> -		};
>>
>>  		plic: interrupt-controller@70000000 {
>>  			compatible = "sophgo,cv1800b-plic", "thead,c900-plic";
>> diff --git a/arch/riscv/boot/dts/sophgo/cv1800b.dtsi b/arch/riscv/boot/dts/sophgo/cv180x.dtsi
>> similarity index 80%
>> copy from arch/riscv/boot/dts/sophgo/cv1800b.dtsi
>> copy to arch/riscv/boot/dts/sophgo/cv180x.dtsi
>> index df40e87ee063..ffaf51724c98 100644
>
>Firstly, this form of diff really threw me, I was quite confused for a
>few minutes. A copy plus a pair of diffs doesn't really make much sense,
>when the operation being carried is an extraction of some nodes to a
>different file.
>

I was told to use -C/-M/-B to generate patch, and the git format-patch
give me this wired output if I use -C, using -M seems no change from v1.
The -B output is also disappointing. Maybe I need to generate agaion?

The v1 version:
https://lore.kernel.org/linux-riscv/IA1PR20MB495360B632D106BBB833D82ABBCFA@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx/

>> --- a/arch/riscv/boot/dts/sophgo/cv1800b.dtsi
>> +++ b/arch/riscv/boot/dts/sophgo/cv180x.dtsi
>> @@ -1,12 +1,12 @@
>>  // SPDX-License-Identifier: (GPL-2.0 OR MIT)
>>  /*
>>   * Copyright (C) 2023 Jisheng Zhang <jszhang@xxxxxxxxxx>
>> + * Copyright (C) 2023 Inochi Amaoto <inochiama@xxxxxxxxxxx>
>
>Also, is moving around some bits of hw description really a
>copyrightable change?
>

It seems to be a mistake when I splitting the patch from v1.
This copyright should in the next patch.

>>   */
>>
>>  #include <dt-bindings/interrupt-controller/irq.h>
>>
>>  / {
>> -	compatible = "sophgo,cv1800b";
>>  	#address-cells = <1>;
>>  	#size-cells = <1>;
>>
>> @@ -48,7 +48,6 @@ osc: oscillator {
>>
>>  	soc {
>>  		compatible = "simple-bus";
>> -		interrupt-parent = <&plic>;
>>  		#address-cells = <1>;
>>  		#size-cells = <1>;
>>  		dma-noncoherent;
>> @@ -103,21 +102,5 @@ uart4: serial@41c0000 {
>>  			reg-io-width = <4>;
>>  			status = "disabled";
>>  		};
>> -
>> -		plic: interrupt-controller@70000000 {
>> -			compatible = "sophgo,cv1800b-plic", "thead,c900-plic";
>> -			reg = <0x70000000 0x4000000>;
>> -			interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 9>;
>> -			interrupt-controller;
>> -			#address-cells = <0>;
>> -			#interrupt-cells = <2>;
>> -			riscv,ndev = <101>;
>> -		};
>> -
>> -		clint: timer@74000000 {
>> -			compatible = "sophgo,cv1800b-clint", "thead,c900-clint";
>> -			reg = <0x74000000 0x10000>;
>> -			interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>;
>> -		};
>>  	};
>>  };
>
>What I wanted to comment on was this though - it seems that both the
>cv1800b and the cv1812h have identical plic and clint nodes, other than
>their compatibles? If that is the case, why create a cv1800b and a
>cv1812h specific file containing entirely new nodes, when overriding the
>compatible would be sufficient? Doubly so if the other SoCs in the
>cv18xx series are going to have identical layouts.
>
>I gave it a quick test locally with the below diff applied on top of
>this series - although I didn't make sure that I didn't re-order the
>plic & clint nodes, I just wanted to demonstrate what I had done.
>

Thanks for demonstration. AFAIK, what you said is true. the most devices
of CV180x and CV181x are the same, including plic and clint. The reason I
used a new one is to identify these two devices without making the
compatible string confusing.
Should I change the binding name of plic and clint to "sophgo,cv1800-xxx"
to mark there are the same series? I think this can avoid this confusing
dt nodes.

>Cheers,
>Conor.
>




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux