[PATCH v8 09/22] PCI: microchip: Move the setup functions to pcie-plda-host.c

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Move setup functions to common pcie-plda-host.c.
So these two functions can be re-used.

Signed-off-by: Minda Chen <minda.chen@xxxxxxxxxxxxxxxx>
Reviewed-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
---
 drivers/pci/controller/plda/Kconfig           |  4 +
 drivers/pci/controller/plda/Makefile          |  1 +
 .../pci/controller/plda/pcie-microchip-host.c | 59 --------------
 drivers/pci/controller/plda/pcie-plda-host.c  | 80 +++++++++++++++++++
 drivers/pci/controller/plda/pcie-plda.h       |  5 ++
 5 files changed, 90 insertions(+), 59 deletions(-)
 create mode 100644 drivers/pci/controller/plda/pcie-plda-host.c

diff --git a/drivers/pci/controller/plda/Kconfig b/drivers/pci/controller/plda/Kconfig
index 5cb3be4fc98c..e54a82ee94f5 100644
--- a/drivers/pci/controller/plda/Kconfig
+++ b/drivers/pci/controller/plda/Kconfig
@@ -3,10 +3,14 @@
 menu "PLDA-based PCIe controllers"
 	depends on PCI
 
+config PCIE_PLDA_HOST
+	bool
+
 config PCIE_MICROCHIP_HOST
 	tristate "Microchip AXI PCIe controller"
 	depends on PCI_MSI && OF
 	select PCI_HOST_COMMON
+	select PCIE_PLDA_HOST
 	help
 	  Say Y here if you want kernel to support the Microchip AXI PCIe
 	  Host Bridge driver.
diff --git a/drivers/pci/controller/plda/Makefile b/drivers/pci/controller/plda/Makefile
index e1a265cbf91c..4340ab007f44 100644
--- a/drivers/pci/controller/plda/Makefile
+++ b/drivers/pci/controller/plda/Makefile
@@ -1,2 +1,3 @@
 # SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_PCIE_PLDA_HOST) += pcie-plda-host.o
 obj-$(CONFIG_PCIE_MICROCHIP_HOST) += pcie-microchip-host.o
diff --git a/drivers/pci/controller/plda/pcie-microchip-host.c b/drivers/pci/controller/plda/pcie-microchip-host.c
index 31ca8d44ee2a..2e79bcc7c0a5 100644
--- a/drivers/pci/controller/plda/pcie-microchip-host.c
+++ b/drivers/pci/controller/plda/pcie-microchip-host.c
@@ -838,65 +838,6 @@ static int mc_pcie_init_irq_domains(struct plda_pcie_rp *port)
 	return mc_allocate_msi_domains(port);
 }
 
-static void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
-				   phys_addr_t axi_addr, phys_addr_t pci_addr,
-				   size_t size)
-{
-	u32 atr_sz = ilog2(size) - 1;
-	u32 val;
-
-	if (index == 0)
-		val = PCIE_CONFIG_INTERFACE;
-	else
-		val = PCIE_TX_RX_INTERFACE;
-
-	writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
-	       ATR0_AXI4_SLV0_TRSL_PARAM);
-
-	val = lower_32_bits(axi_addr) | (atr_sz << ATR_SIZE_SHIFT) |
-			    ATR_IMPL_ENABLE;
-	writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
-	       ATR0_AXI4_SLV0_SRCADDR_PARAM);
-
-	val = upper_32_bits(axi_addr);
-	writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
-	       ATR0_AXI4_SLV0_SRC_ADDR);
-
-	val = lower_32_bits(pci_addr);
-	writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
-	       ATR0_AXI4_SLV0_TRSL_ADDR_LSB);
-
-	val = upper_32_bits(pci_addr);
-	writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
-	       ATR0_AXI4_SLV0_TRSL_ADDR_UDW);
-
-	val = readl(bridge_base_addr + ATR0_PCIE_WIN0_SRCADDR_PARAM);
-	val |= (ATR0_PCIE_ATR_SIZE << ATR0_PCIE_ATR_SIZE_SHIFT);
-	writel(val, bridge_base_addr + ATR0_PCIE_WIN0_SRCADDR_PARAM);
-	writel(0, bridge_base_addr + ATR0_PCIE_WIN0_SRC_ADDR);
-}
-
-static int plda_pcie_setup_iomems(struct pci_host_bridge *bridge,
-				  struct plda_pcie_rp *port)
-{
-	void __iomem *bridge_base_addr = port->bridge_addr;
-	struct resource_entry *entry;
-	u64 pci_addr;
-	u32 index = 1;
-
-	resource_list_for_each_entry(entry, &bridge->windows) {
-		if (resource_type(entry->res) == IORESOURCE_MEM) {
-			pci_addr = entry->res->start - entry->offset;
-			plda_pcie_setup_window(bridge_base_addr, index,
-					       entry->res->start, pci_addr,
-					       resource_size(entry->res));
-			index++;
-		}
-	}
-
-	return 0;
-}
-
 static inline void mc_clear_secs(struct mc_pcie *port)
 {
 	void __iomem *ctrl_base_addr = port->axi_base_addr + MC_PCIE_CTRL_ADDR;
diff --git a/drivers/pci/controller/plda/pcie-plda-host.c b/drivers/pci/controller/plda/pcie-plda-host.c
new file mode 100644
index 000000000000..19131181897f
--- /dev/null
+++ b/drivers/pci/controller/plda/pcie-plda-host.c
@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * PLDA PCIe XpressRich host controller driver
+ *
+ * Copyright (C) 2023 Microchip Co. Ltd
+ *
+ * Author: Daire McNamara <daire.mcnamara@xxxxxxxxxxxxx>
+ */
+
+#include <linux/irqchip/chained_irq.h>
+#include <linux/irqdomain.h>
+#include <linux/msi.h>
+#include <linux/of_address.h>
+#include <linux/of_pci.h>
+#include <linux/pci_regs.h>
+#include <linux/pci-ecam.h>
+#include <linux/platform_device.h>
+
+#include "pcie-plda.h"
+
+void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
+			    phys_addr_t axi_addr, phys_addr_t pci_addr,
+			    size_t size)
+{
+	u32 atr_sz = ilog2(size) - 1;
+	u32 val;
+
+	if (index == 0)
+		val = PCIE_CONFIG_INTERFACE;
+	else
+		val = PCIE_TX_RX_INTERFACE;
+
+	writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
+	       ATR0_AXI4_SLV0_TRSL_PARAM);
+
+	val = lower_32_bits(axi_addr) | (atr_sz << ATR_SIZE_SHIFT) |
+			    ATR_IMPL_ENABLE;
+	writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
+	       ATR0_AXI4_SLV0_SRCADDR_PARAM);
+
+	val = upper_32_bits(axi_addr);
+	writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
+	       ATR0_AXI4_SLV0_SRC_ADDR);
+
+	val = lower_32_bits(pci_addr);
+	writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
+	       ATR0_AXI4_SLV0_TRSL_ADDR_LSB);
+
+	val = upper_32_bits(pci_addr);
+	writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
+	       ATR0_AXI4_SLV0_TRSL_ADDR_UDW);
+
+	val = readl(bridge_base_addr + ATR0_PCIE_WIN0_SRCADDR_PARAM);
+	val |= (ATR0_PCIE_ATR_SIZE << ATR0_PCIE_ATR_SIZE_SHIFT);
+	writel(val, bridge_base_addr + ATR0_PCIE_WIN0_SRCADDR_PARAM);
+	writel(0, bridge_base_addr + ATR0_PCIE_WIN0_SRC_ADDR);
+}
+EXPORT_SYMBOL_GPL(plda_pcie_setup_window);
+
+int plda_pcie_setup_iomems(struct pci_host_bridge *bridge,
+			   struct plda_pcie_rp *port)
+{
+	void __iomem *bridge_base_addr = port->bridge_addr;
+	struct resource_entry *entry;
+	u64 pci_addr;
+	u32 index = 1;
+
+	resource_list_for_each_entry(entry, &bridge->windows) {
+		if (resource_type(entry->res) == IORESOURCE_MEM) {
+			pci_addr = entry->res->start - entry->offset;
+			plda_pcie_setup_window(bridge_base_addr, index,
+					       entry->res->start, pci_addr,
+					       resource_size(entry->res));
+			index++;
+		}
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(plda_pcie_setup_iomems);
diff --git a/drivers/pci/controller/plda/pcie-plda.h b/drivers/pci/controller/plda/pcie-plda.h
index 363fcbbaf6ec..3deefd35fa5a 100644
--- a/drivers/pci/controller/plda/pcie-plda.h
+++ b/drivers/pci/controller/plda/pcie-plda.h
@@ -120,4 +120,9 @@ struct plda_pcie_rp {
 	void __iomem *bridge_addr;
 };
 
+void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
+			    phys_addr_t axi_addr, phys_addr_t pci_addr,
+			    size_t size);
+int plda_pcie_setup_iomems(struct pci_host_bridge *bridge,
+			   struct plda_pcie_rp *port);
 #endif
-- 
2.17.1





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux