Hello Scott, Is this v3 OK? Best Regards, Shaohui Xie > -----Original Message----- > From: shh.xie@xxxxxxxxx [mailto:shh.xie@xxxxxxxxx] > Sent: Tuesday, December 23, 2014 3:58 PM > To: linuxppc-dev@xxxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; Wood Scott-B07421 > Cc: Medve Emilian-EMMEDVE1; Xie Shaohui-B21989 > Subject: [PATCH] [v3] power/fsl: add MDIO dt binding for FMan > > From: Shaohui Xie <Shaohui.Xie@xxxxxxxxxxxxx> > > This binding is for FMan MDIO, it covers FMan v2 & FMan v3. > > Signed-off-by: Shaohui Xie <Shaohui.Xie@xxxxxxxxxxxxx> > --- > changes in v3: > rephrase the 'Definition' of property 'bus-frequency', don't include the > property in example. > > changes in v2: > addressed comments from Scott in V1. > > .../devicetree/bindings/powerpc/fsl/fman.txt | 69 ++++++++++++++++++++++ > 1 file changed, 69 insertions(+) > > diff --git a/Documentation/devicetree/bindings/powerpc/fsl/fman.txt > b/Documentation/devicetree/bindings/powerpc/fsl/fman.txt > index edeea16..737aa4c 100644 > --- a/Documentation/devicetree/bindings/powerpc/fsl/fman.txt > +++ b/Documentation/devicetree/bindings/powerpc/fsl/fman.txt > @@ -7,6 +7,7 @@ CONTENTS > - FMan MURAM Node > - FMan dTSEC/XGEC/mEMAC Node > - FMan IEEE 1588 Node > + - FMan MDIO Node > - Example > > ============================================================================= > @@ -357,6 +358,69 @@ ptp-timer@fe000 { > }; > > ============================================================================= > +FMan MDIO Node > + > +DESCRIPTION > + > +The MDIO is a bus to which the PHY devices are connected. > + > +PROPERTIES > + > +- compatible > + Usage: required > + Value type: <stringlist> > + Definition: A standard property. > + Must include "fsl,fman-mdio" for 1 Gb/s MDIO from FMan v2. > + Must include "fsl,fman-xmdio" for 10 Gb/s MDIO from FMan v2. > + Must include "fsl,fman-memac-mdio" for 1/10 Gb/s MDIO from > + FMan v3. > + > +- reg > + Usage: required > + Value type: <prop-encoded-array> > + Definition: A standard property. > + > +- bus-frequency > + Usage: optional > + Value type: <u32> > + Definition: Specifies the external MDIO bus clock speed to > + be used, if different from the standard 2.5 MHz. > + This may be due to the standard speed being unsupported (e.g. > + due to a hardware problem), or to advertise that all relevant > + components in the system support a faster speed. > + > +- interrupts > + Usage: optional > + Value type: <prop-encoded-array> > + Definition: Event interrupt of external MDIO controller. > + 1 Gb/s MDIO and 10 Gb/s MDIO has one interrupt respectively. > + > +- fsl,fman-internal-mdio > + Usage: required for internal MDIO > + Value type: boolean > + Definition: Fman has internal MDIO for internal PCS(Physical > + Coding Sublayer) PHYs and external MDIO for external PHYs. > + The settings and programming routines for internal/external > + MDIO are different. Must be included for internal MDIO. > + > +EXAMPLE > + > +Example for FMan v2 external MDIO: > + > +mdio@f1000 { > + compatible = "fsl,fman-xmdio"; > + reg = <0xf1000 0x1000>; > +}; > + > +Example for FMan v3 internal MDIO: > + > +mdio@f1000 { > + compatible = "fsl,fman-memac-mdio"; > + reg = <0xf1000 0x1000>; > + fsl,fman-internal-mdio; > +}; > + > +======================================================================= > +====== > Example > > fman@400000 { > @@ -531,4 +595,9 @@ fman@400000 { > compatible = "fsl,fman-ptp-timer"; > reg = <0xfe000 0x1000>; > }; > + > + mdio@f1000 { > + compatible = "fsl,fman-xmdio"; > + reg = <0xf1000 0x1000>; > + }; > }; > -- > 1.8.4.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
