On 05/10/2023 16:27, Jayesh Choudhary wrote: > This series adds support for: > - DisplayPort for J784S4-EVM > - Displayport and HDMI for AM69-SK platform > > NOTE: Patch 4/5 introduces the following dtc warning which can be ignored > since its behind W=1 check: > Warning (graph_child_address): /bus@100000/dss@4a00000/ports: graph node > has single child node 'port@0', #address-cells/#size-cells are not > necessary > > (This is more accurate description for port and the dtc check should not > differentiate between port@0 and port@1.[0]) > > Changelog v10->v11: > - Added comment for disabling serdes-refclk (according to comments of v5) > - Update commit message to document why serdes, wiz nodes (2/5) and mhdp- > bridge, tidss nodes (3/5) are disabled. > - Keep only ports in board files and move common properties to main file > and document why ports are kept empty. > > v10: https://lore.kernel.org/all/20230927121157.278592-1-j-choudhary@xxxxxx/ > > Changelog v9->v10: > - Remove duplicate properties from dp0_ports node in main file. > - Add reg for the port even though there is only single port in dss_port > since its more accurate description for the port. > - Carry the R-by tags from v9. > > v9: https://lore.kernel.org/all/20230803080441.367341-1-j-choudhary@xxxxxx/ > > Changelog v8->v9: > - Fix compatible of serdes_ln_ctrl node > - Fix extra new lines across nodes > - Fix node-names to keep them generic > > v8: https://lore.kernel.org/all/20230801070019.219660-1-j-choudhary@xxxxxx/ > > Changelog v7->v8: > - rebase on tag next-20230731 > - add AM69 display support > - fix commit heading for patch [2/5] > > v7: https://lore.kernel.org/all/20230728050859.7370-1-j-choudhary@xxxxxx/ > > Changelog v6->v7: > - change compatible for scm_conf to 'simple-bus' > - drop main_cpsw node due to driver dependency on [1] > > v6: https://lore.kernel.org/all/20230721132029.123881-1-j-choudhary@xxxxxx/ > > Changelog v5->v6: > - Change header file according to [2]. > - Add idle-state property in serdes_ln_ctrl node. > - Fix dtbs_check warning due to clock-frequency property in serdes_refclk > node by disabling the node in main.dtsi and enabling it in board file > when the clock-frequency node is actually added. > > v5: https://lore.kernel.org/all/20230710101705.154119-1-j-choudhary@xxxxxx/ > > Changelog v4->v5: > - rebased the patches on linux-next tip. > > v4: https://lore.kernel.org/all/20230425131607.290707-1-j-choudhary@xxxxxx/ > > Changelog v3->v4: > - add reg property to serdes_ln_ctrl and fix the node name again to > get rid of dtbs_check error. > - reorder reg, reg-names and ranges property for main_cpsw1. > - correct the order for clocks in serdes_wiz nodes to fix dtbs_check > warnings. > - fix indentation in reg, reg-names and clock property for dss node. > - add comments for the reg type in dss registers. > > v3: https://lore.kernel.org/all/20230419061710.290068-1-j-choudhary@xxxxxx/ > > Changelog v3->v2: > - fix dtc warnings for 'scm_conf' and 'serdes_ln_ctrl' nodes > (Checked all the changes of the series with W=12 option during build) > - added clock-frequency for serdes_refclk along with other EVM changes > This refclk is being used by all the instances of serdes_wiz which > are disabled by default. So configuring refclk when the serdes nodes > are used for the first time is okay. > > v2: https://lore.kernel.org/all/20230414151553.339599-1-j-choudhary@xxxxxx/ > > Changelog v1->v2: > - Moved J784S4 EVM changes together to the last patch > (Suggested by Andrew) > > v1: https://lore.kernel.org/all/20230405111412.151192-1-j-choudhary@xxxxxx/ > > > [0]: <https://lore.kernel.org/all/570903b6-8239-d44a-5fac-71700804cb5d@xxxxxx/> > [1]: <https://lore.kernel.org/all/20230605154153.24025-1-afd@xxxxxx/> > [2]: <https://lore.kernel.org/all/20230721125732.122421-1-j-choudhary@xxxxxx/> > > Dasnavis Sabiya (1): > arm64: dts: ti: k3-am69-sk: Add DP and HDMI support > > Rahul T R (2): > arm64: dts: ti: k3-j784s4-main: Add DSS and DP-bridge node > arm64: dts: ti: k3-j784s4-evm: Enable DisplayPort-0 > > Siddharth Vadapalli (2): > arm64: dts: ti: k3-j784s4-main: Add system controller and SERDES lane > mux > arm64: dts: ti: k3-j784s4-main: Add WIZ and SERDES PHY nodes > > arch/arm64/boot/dts/ti/k3-am69-sk.dts | 229 +++++++++++++++++ > arch/arm64/boot/dts/ti/k3-j784s4-evm.dts | 119 +++++++++ > arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 276 +++++++++++++++++++++ > 3 files changed, 624 insertions(+) > For this series: Reviewed-by: Roger Quadros <rogerq@xxxxxxxxxx>
