Re: [PATCH 16/21] pinctrl: samsung: Add gs101 SoC pinctrl configuration

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 05/10/2023 17:56, Peter Griffin wrote:
> Add support for the pin-controller found on the gs101
> SoC used in Pixel 6 phones.
> 
> The alive blocks on this SoC also have a filter selection
> register. Add support for this so the digital or delay filter
> can be selected. If the filter selection is not available
> then the default filter (digital) is applied.
> 
> Signed-off-by: Peter Griffin <peter.griffin@xxxxxxxxxx>
> ---
>  .../pinctrl/samsung/pinctrl-exynos-arm64.c    | 163 ++++++++++++++++++
>  drivers/pinctrl/samsung/pinctrl-exynos.c      |  68 +++++++-
>  drivers/pinctrl/samsung/pinctrl-exynos.h      |  44 +++++
>  drivers/pinctrl/samsung/pinctrl-samsung.c     |   4 +
>  drivers/pinctrl/samsung/pinctrl-samsung.h     |  24 +++
>  5 files changed, 302 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c b/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c
> index cb965cf93705..ae681725db26 100644
> --- a/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c
> +++ b/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c
> @@ -796,3 +796,166 @@ const struct samsung_pinctrl_of_match_data fsd_of_data __initconst = {
>  	.ctrl		= fsd_pin_ctrl,
>  	.num_ctrl	= ARRAY_SIZE(fsd_pin_ctrl),
>  };
> +
> +/*
> + * bank type for non-alive type
> + * (CON bit field: 4, DAT bit field: 1, PUD bit field: 4, DRV bit field: 4)
> + * (CONPDN bit field: 2, PUDPDN bit field: 4)
> + */
> +static struct samsung_pin_bank_type bank_type_6  = {

Bank types are defined at the top. "type_6" is way too vague. Look how
the others are named.

> +	.fld_width = { 4, 1, 4, 4, 2, 4, },
> +	.reg_offset = { 0x00, 0x04, 0x08, 0x0c, 0x10, 0x14, },
> +};
> +
> +/*
> + * bank type for alive type
> + * (CON bit field: 4, DAT bit field: 1, PUD bit field: 4, DRV bit field: 4)
> + */
> +static const struct samsung_pin_bank_type bank_type_7 = {

Same problem.

> +	.fld_width = { 4, 1, 4, 4, },
> +	.reg_offset = { 0x00, 0x04, 0x08, 0x0c, },
> +};
> +
> +/* pin banks of gs101 pin-controller (ALIVE) */
> +static const struct samsung_pin_bank_data gs101_pin_alive[] = {
> +	EXYNOS9_PIN_BANK_EINTW(bank_type_7, 8, 0x0, "gpa0", 0x00, 0x00, FLT_SELECTABLE),
> +	EXYNOS9_PIN_BANK_EINTW(bank_type_7, 7, 0x20, "gpa1", 0x04, 0x08, FLT_SELECTABLE),
> +	EXYNOS9_PIN_BANK_EINTW(bank_type_7, 5, 0x40, "gpa2", 0x08, 0x10, FLT_SELECTABLE),
> +	EXYNOS9_PIN_BANK_EINTW(bank_type_7, 4, 0x60, "gpa3", 0x0c, 0x18, FLT_SELECTABLE),
> +	EXYNOS9_PIN_BANK_EINTW(bank_type_7, 4, 0x80, "gpa4", 0x10, 0x1c, FLT_SELECTABLE),
> +	EXYNOS9_PIN_BANK_EINTW(bank_type_7, 7, 0xa0, "gpa5", 0x14, 0x20, FLT_SELECTABLE),
> +	EXYNOS9_PIN_BANK_EINTW(bank_type_7, 8, 0xc0, "gpa9", 0x18, 0x28, FLT_SELECTABLE),
> +	EXYNOS9_PIN_BANK_EINTW(bank_type_7, 2, 0xe0, "gpa10", 0x1c, 0x30, FLT_SELECTABLE),
> +};
> +
> +/* pin banks of gs101 pin-controller (FAR_ALIVE) */
> +static const struct samsung_pin_bank_data gs101_pin_far_alive[] = {
> +	EXYNOS9_PIN_BANK_EINTW(bank_type_7, 8, 0x0, "gpa6", 0x00, 0x00, FLT_SELECTABLE),
> +	EXYNOS9_PIN_BANK_EINTW(bank_type_7, 4, 0x20, "gpa7", 0x04, 0x08, FLT_SELECTABLE),
> +	EXYNOS9_PIN_BANK_EINTW(bank_type_7, 8, 0x40, "gpa8", 0x08, 0x0c, FLT_SELECTABLE),
> +	EXYNOS9_PIN_BANK_EINTW(bank_type_7, 2, 0x60, "gpa11", 0x0c, 0x14, FLT_SELECTABLE),
> +};
> +
> +/* pin banks of gs101 pin-controller (GSACORE) */
> +static const struct samsung_pin_bank_data gs101_pin_gsacore[] = {
> +	EXYNOS9_PIN_BANK_EINTG(bank_type_6, 2, 0x0, "gps0", 0x00, 0x00, FLT_DEFAULT),
> +	EXYNOS9_PIN_BANK_EINTG(bank_type_6, 8, 0x20, "gps1", 0x04, 0x04, FLT_DEFAULT),
> +	EXYNOS9_PIN_BANK_EINTG(bank_type_6, 3, 0x40, "gps2", 0x08, 0x0c, FLT_DEFAULT),
> +};
> +
> +/* pin banks of gs101 pin-controller (GSACTRL) */
> +static const struct samsung_pin_bank_data gs101_pin_gsactrl[] = {
> +	EXYNOS9_PIN_BANK_EINTW(bank_type_7, 6, 0x0, "gps3", 0x00, 0x00, FLT_DEFAULT),
> +};
> +
> +/* pin banks of gs101 pin-controller (PERIC0) */
> +static const struct samsung_pin_bank_data gs101_pin_peric0[] = {
> +	EXYNOS9_PIN_BANK_EINTG(bank_type_6, 5, 0x0, "gpp0", 0x00, 0x00, FLT_DEFAULT),
> +	EXYNOS9_PIN_BANK_EINTG(bank_type_6, 4, 0x20, "gpp1", 0x04, 0x08, FLT_DEFAULT),
> +	EXYNOS9_PIN_BANK_EINTG(bank_type_6, 4, 0x40, "gpp2", 0x08, 0x0c, FLT_DEFAULT),
> +	EXYNOS9_PIN_BANK_EINTG(bank_type_6, 2, 0x60, "gpp3", 0x0c, 0x10, FLT_DEFAULT),
> +	EXYNOS9_PIN_BANK_EINTG(bank_type_6, 4, 0x80, "gpp4", 0x10, 0x14, FLT_DEFAULT),
> +	EXYNOS9_PIN_BANK_EINTG(bank_type_6, 2, 0xa0, "gpp5", 0x14, 0x18, FLT_DEFAULT),
> +	EXYNOS9_PIN_BANK_EINTG(bank_type_6, 4, 0xc0, "gpp6", 0x18, 0x1c, FLT_DEFAULT),
> +	EXYNOS9_PIN_BANK_EINTG(bank_type_6, 2, 0xe0, "gpp7", 0x1c, 0x20, FLT_DEFAULT),
> +	EXYNOS9_PIN_BANK_EINTG(bank_type_6, 4, 0x100, "gpp8", 0x20, 0x24, FLT_DEFAULT),
> +	EXYNOS9_PIN_BANK_EINTG(bank_type_6, 2, 0x120, "gpp9", 0x24, 0x28, FLT_DEFAULT),
> +	EXYNOS9_PIN_BANK_EINTG(bank_type_6, 4, 0x140, "gpp10", 0x28, 0x2c, FLT_DEFAULT),
> +	EXYNOS9_PIN_BANK_EINTG(bank_type_6, 2, 0x160, "gpp11", 0x2c, 0x30, FLT_DEFAULT),
> +	EXYNOS9_PIN_BANK_EINTG(bank_type_6, 4, 0x180, "gpp12", 0x30, 0x34, FLT_DEFAULT),
> +	EXYNOS9_PIN_BANK_EINTG(bank_type_6, 2, 0x1a0, "gpp13", 0x34, 0x38, FLT_DEFAULT),
> +	EXYNOS9_PIN_BANK_EINTG(bank_type_6, 4, 0x1c0, "gpp14", 0x38, 0x3c, FLT_DEFAULT),
> +	EXYNOS9_PIN_BANK_EINTG(bank_type_6, 2, 0x1e0, "gpp15", 0x3c, 0x40, FLT_DEFAULT),
> +	EXYNOS9_PIN_BANK_EINTG(bank_type_6, 4, 0x200, "gpp16", 0x40, 0x44, FLT_DEFAULT),
> +	EXYNOS9_PIN_BANK_EINTG(bank_type_6, 2, 0x220, "gpp17", 0x44, 0x48, FLT_DEFAULT),
> +	EXYNOS9_PIN_BANK_EINTG(bank_type_6, 4, 0x240, "gpp18", 0x48, 0x4c, FLT_DEFAULT),
> +	EXYNOS9_PIN_BANK_EINTG(bank_type_6, 4, 0x260, "gpp19", 0x4c, 0x50, FLT_DEFAULT),
> +};
> +
> +/* pin banks of gs101 pin-controller (PERIC1) */
> +static const struct samsung_pin_bank_data gs101_pin_peric1[] = {
> +	EXYNOS9_PIN_BANK_EINTG(bank_type_6, 8, 0x0, "gpp20", 0x00, 0x00, FLT_DEFAULT),
> +	EXYNOS9_PIN_BANK_EINTG(bank_type_6, 4, 0x20, "gpp21", 0x04, 0x08, FLT_DEFAULT),
> +	EXYNOS9_PIN_BANK_EINTG(bank_type_6, 2, 0x40, "gpp22", 0x08, 0x0c, FLT_DEFAULT),
> +	EXYNOS9_PIN_BANK_EINTG(bank_type_6, 8, 0x60, "gpp23", 0x0c, 0x10, FLT_DEFAULT),
> +	EXYNOS9_PIN_BANK_EINTG(bank_type_6, 4, 0x80, "gpp24", 0x10, 0x18, FLT_DEFAULT),
> +	EXYNOS9_PIN_BANK_EINTG(bank_type_6, 4, 0xa0, "gpp25", 0x14, 0x1c, FLT_DEFAULT),
> +	EXYNOS9_PIN_BANK_EINTG(bank_type_6, 5, 0xc0, "gpp26", 0x18, 0x20, FLT_DEFAULT),
> +	EXYNOS9_PIN_BANK_EINTG(bank_type_6, 4, 0xe0, "gpp27", 0x1c, 0x28, FLT_DEFAULT),
> +};
> +
> +/* pin banks of gs101 pin-controller (HSI1) */
> +static const struct samsung_pin_bank_data gs101_pin_hsi1[] = {
> +	EXYNOS9_PIN_BANK_EINTG(bank_type_6, 6, 0x0, "gph0", 0x00, 0x00, FLT_DEFAULT),
> +	EXYNOS9_PIN_BANK_EINTG(bank_type_6, 7, 0x20, "gph1", 0x04, 0x08, FLT_DEFAULT),
> +};
> +
> +/* pin banks of gs101 pin-controller (HSI2) */
> +static const struct samsung_pin_bank_data gs101_pin_hsi2[] = {
> +	EXYNOS9_PIN_BANK_EINTG(bank_type_6, 6, 0x0, "gph2", 0x00, 0x00, FLT_DEFAULT),
> +	EXYNOS9_PIN_BANK_EINTG(bank_type_6, 2, 0x20, "gph3", 0x04, 0x08, FLT_DEFAULT),
> +	EXYNOS9_PIN_BANK_EINTG(bank_type_6, 6, 0x40, "gph4", 0x08, 0x0c, FLT_DEFAULT),
> +};
> +
> +static const struct samsung_pin_ctrl gs101_pin_ctrl[] __initconst = {
> +	{
> +		/* pin banks of gs101 pin-controller (ALIVE) */
> +		.pin_banks	= gs101_pin_alive,
> +		.nr_banks	= ARRAY_SIZE(gs101_pin_alive),
> +		.eint_gpio_init = exynos_eint_gpio_init,
> +		.eint_wkup_init = exynos_eint_wkup_init,
> +		.suspend	= exynos_pinctrl_suspend,
> +		.resume		= exynos_pinctrl_resume,
> +	}, {
> +		/* pin banks of gs101 pin-controller (FAR_ALIVE) */
> +		.pin_banks	= gs101_pin_far_alive,
> +		.nr_banks	= ARRAY_SIZE(gs101_pin_far_alive),
> +		.eint_gpio_init = exynos_eint_gpio_init,
> +		.eint_wkup_init = exynos_eint_wkup_init,
> +		.suspend	= exynos_pinctrl_suspend,
> +		.resume		= exynos_pinctrl_resume,
> +	}, {
> +		/* pin banks of gs101 pin-controller (GSACORE) */
> +		.pin_banks	= gs101_pin_gsacore,
> +		.nr_banks	= ARRAY_SIZE(gs101_pin_gsacore),
> +		.eint_gpio_init = exynos_eint_gpio_init,
> +	}, {
> +		/* pin banks of gs101 pin-controller (GSACTRL) */
> +		.pin_banks	= gs101_pin_gsactrl,
> +		.nr_banks	= ARRAY_SIZE(gs101_pin_gsactrl),
> +		.eint_gpio_init = exynos_eint_gpio_init,
> +	}, {
> +		/* pin banks of gs101 pin-controller (PERIC0) */
> +		.pin_banks	= gs101_pin_peric0,
> +		.nr_banks	= ARRAY_SIZE(gs101_pin_peric0),
> +		.eint_gpio_init = exynos_eint_gpio_init,
> +		.suspend	= exynos_pinctrl_suspend,
> +		.resume		= exynos_pinctrl_resume,
> +	}, {
> +		/* pin banks of gs101 pin-controller (PERIC1) */
> +		.pin_banks	= gs101_pin_peric1,
> +		.nr_banks	= ARRAY_SIZE(gs101_pin_peric1),
> +		.eint_gpio_init = exynos_eint_gpio_init,
> +		.suspend	= exynos_pinctrl_suspend,
> +		.resume	= exynos_pinctrl_resume,
> +	}, {
> +		/* pin banks of gs101 pin-controller (HSI1) */
> +		.pin_banks	= gs101_pin_hsi1,
> +		.nr_banks	= ARRAY_SIZE(gs101_pin_hsi1),
> +		.eint_gpio_init = exynos_eint_gpio_init,
> +		.suspend	= exynos_pinctrl_suspend,
> +		.resume		= exynos_pinctrl_resume,
> +	}, {
> +		/* pin banks of gs101 pin-controller (HSI2) */
> +		.pin_banks	= gs101_pin_hsi2,
> +		.nr_banks	= ARRAY_SIZE(gs101_pin_hsi2),
> +		.eint_gpio_init = exynos_eint_gpio_init,
> +		.suspend	= exynos_pinctrl_suspend,
> +		.resume		= exynos_pinctrl_resume,
> +	},
> +};
> +
> +const struct samsung_pinctrl_of_match_data gs101_of_data __initconst = {
> +	.ctrl		= gs101_pin_ctrl,
> +	.num_ctrl	= ARRAY_SIZE(gs101_pin_ctrl),
> +};
> diff --git a/drivers/pinctrl/samsung/pinctrl-exynos.c b/drivers/pinctrl/samsung/pinctrl-exynos.c
> index a8212fc126bf..0c6c3312abb7 100644
> --- a/drivers/pinctrl/samsung/pinctrl-exynos.c
> +++ b/drivers/pinctrl/samsung/pinctrl-exynos.c
> @@ -269,6 +269,50 @@ struct exynos_eint_gpio_save {
>  	u32 eint_mask;
>  };

Please split the patch into two: one of adding new filter code and
second for new Google SoC.

>  
> +static void exynos_eint_flt_config(int sel, int width,
> +				   struct samsung_pinctrl_drv_data *d,
> +				   struct samsung_pin_bank *bank)

Arguments: first drv_data, then bank, then width, then sel... and what
is sel actually?

Also, why do you need width if it is always 0? Will it be different in
next pinctrl controllers? So the filter is per entire bank?

> +{
> +	unsigned int flt_reg, flt_con = 0;
> +	unsigned int val, shift;
> +	int i;
> +	int loop_cnt;
> +
> +	flt_con |= EXYNOS_FLTCON_EN;
> +
> +	if (sel)
> +		flt_con |= EXYNOS_FLTCON_SEL_DIGITAL;
> +
> +	flt_con |= EXYNOS_FLTCON_WIDTH(width);

This is always 0, what's the point?

> +
> +	flt_reg = EXYNOS_GPIO_EFLTCON_OFFSET + bank->fltcon_offset;
> +
> +	if (bank->nr_pins > EXYNOS_FLTCON_NR_PIN)
> +		/*
> +		 * if nr_pins > 4, we should set FLTCON0 register fully.
> +		 * (pin0 ~ 3). So loop 4 times in case of FLTCON0.
> +		 */
> +		loop_cnt = 4;
> +	else
> +		loop_cnt = bank->nr_pins;

Please document the layout of the registers in exynos_eint_flt_config()
comment (not kerneldoc). Also document what do you want to achieve here
- set entire bank to one filter for the suspend/resume?

> +
> +	val = readl(d->virt_base + flt_reg);
> +
> +	for (i = 0; i < loop_cnt; i++) {
> +		shift = i * EXYNOS_FLTCON_LEN;
> +		val &= ~(EXYNOS_FLTCON_MASK << shift);
> +		val |= (flt_con << shift);
> +	}
> +
> +	writel(val, d->virt_base + flt_reg);
> +

Missing /*

> +	/* if nr_pins > 4, we should also set FLTCON1 register like FLTCON0.
> +	 * (pin4 ~ )
> +	 */
> +	if (bank->nr_pins > EXYNOS_FLTCON_NR_PIN)
> +		writel(val, d->virt_base + flt_reg + 0x4);
> +}
> +
>  /*
>   * exynos_eint_gpio_init() - setup handling of external gpio interrupts.
>   * @d: driver data of samsung pinctrl driver.
> @@ -321,6 +365,10 @@ __init int exynos_eint_gpio_init(struct samsung_pinctrl_drv_data *d)
>  			goto err_domains;
>  		}
>  
> +		/* Set Delay Analog Filter */
> +		if (bank->fltcon_type != FLT_DEFAULT)
> +			exynos_eint_flt_config(EXYNOS_FLTCON_SEL_DELAY,
> +					       0, d, bank);
>  	}
>  
>  	return 0;
> @@ -555,6 +603,11 @@ __init int exynos_eint_wkup_init(struct samsung_pinctrl_drv_data *d)
>  		if (bank->eint_type != EINT_TYPE_WKUP)
>  			continue;
>  
> +		/* Set Digital Filter */
> +		if (bank->fltcon_type != FLT_DEFAULT)
> +			exynos_eint_flt_config(EXYNOS_FLTCON_SEL_DIGITAL,
> +					       0, d, bank);
> +
>  		bank->irq_chip = devm_kmemdup(dev, irq_chip, sizeof(*irq_chip),
>  					      GFP_KERNEL);
>  		if (!bank->irq_chip) {
> @@ -658,6 +711,7 @@ static void exynos_pinctrl_suspend_bank(
>  void exynos_pinctrl_suspend(struct samsung_pinctrl_drv_data *drvdata)
>  {
>  	struct samsung_pin_bank *bank = drvdata->pin_banks;
> +	struct samsung_pinctrl_drv_data *d = bank->drvdata;
>  	struct exynos_irq_chip *irq_chip = NULL;
>  	int i;
>  
> @@ -665,6 +719,10 @@ void exynos_pinctrl_suspend(struct samsung_pinctrl_drv_data *drvdata)
>  		if (bank->eint_type == EINT_TYPE_GPIO)
>  			exynos_pinctrl_suspend_bank(drvdata, bank);
>  		else if (bank->eint_type == EINT_TYPE_WKUP) {
> +			/* Setting Delay (Analog) Filter */
> +			if (bank->fltcon_type != FLT_DEFAULT)
> +				exynos_eint_flt_config(EXYNOS_FLTCON_SEL_DELAY,
> +						       0, d, bank);
>  			if (!irq_chip) {
>  				irq_chip = bank->irq_chip;
>  				irq_chip->set_eint_wakeup_mask(drvdata,
> @@ -707,11 +765,19 @@ static void exynos_pinctrl_resume_bank(
>  void exynos_pinctrl_resume(struct samsung_pinctrl_drv_data *drvdata)
>  {
>  	struct samsung_pin_bank *bank = drvdata->pin_banks;
> +	struct samsung_pinctrl_drv_data *d = bank->drvdata;
>  	int i;
>  
>  	for (i = 0; i < drvdata->nr_banks; ++i, ++bank)
> -		if (bank->eint_type == EINT_TYPE_GPIO)
> +		if (bank->eint_type == EINT_TYPE_GPIO) {
>  			exynos_pinctrl_resume_bank(drvdata, bank);
> +		} else if (bank->eint_type == EINT_TYPE_WKUP ||
> +			bank->eint_type == EINT_TYPE_WKUP_MUX) {
> +			/* Set Digital Filter */
> +			if (bank->fltcon_type != FLT_DEFAULT)
> +				exynos_eint_flt_config(EXYNOS_FLTCON_SEL_DIGITAL,
> +						       0, d, bank);
> +		}
>  }
>  
>  static void exynos_retention_enable(struct samsung_pinctrl_drv_data *drvdata)
> diff --git a/drivers/pinctrl/samsung/pinctrl-exynos.h b/drivers/pinctrl/samsung/pinctrl-exynos.h
> index 7bd6d82c9f36..aafd8f9f52f8 100644
> --- a/drivers/pinctrl/samsung/pinctrl-exynos.h
> +++ b/drivers/pinctrl/samsung/pinctrl-exynos.h
> @@ -16,6 +16,8 @@
>  #ifndef __PINCTRL_SAMSUNG_EXYNOS_H
>  #define __PINCTRL_SAMSUNG_EXYNOS_H
>  
> +#include <linux/bitfield.h>
> +

I don't think you use in this header anything from bitfield.

>  /* Values for the pin CON register */
>  #define EXYNOS_PIN_CON_FUNC_EINT	0xf
>  
> @@ -50,6 +52,14 @@
>  
>  #define EXYNOS_EINT_MAX_PER_BANK	8
>  #define EXYNOS_EINT_NR_WKUP_EINT
> +/* EINT filter configuration */
> +#define EXYNOS_FLTCON_EN		BIT(7)

EXYNOS9? Earlier variants did not have it, AFAIR.

> +#define EXYNOS_FLTCON_SEL_DIGITAL	BIT(6)
> +#define EXYNOS_FLTCON_SEL_DELAY		0
> +#define EXYNOS_FLTCON_WIDTH(x)		((x) & 0x3f)
> +#define EXYNOS_FLTCON_MASK		0xFF

Keep lowercase hex

> +#define EXYNOS_FLTCON_LEN		8
> +#define EXYNOS_FLTCON_NR_PIN		4
>  
>  #define EXYNOS_PIN_BANK_EINTN(pins, reg, id)		\
>  	{						\
> @@ -140,6 +150,40 @@
>  		.name		= id				\
>  	}
Best regards,
Krzysztof





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux