Re: [PATCH 2/2] backlight: Add Kinetic KTD2801 driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 05/10/2023 20:49, Duje Mihanović wrote:
> Add driver for the Kinetic KTD2801 backlight driver.
> 
> Signed-off-by: Duje Mihanović <duje.mihanovic@xxxxxxxx>
> ---
>  MAINTAINERS                                 |   6 ++
>  drivers/video/backlight/Kconfig             |   7 ++
>  drivers/video/backlight/Makefile            |   1 +
>  drivers/video/backlight/ktd2801-backlight.c | 151 ++++++++++++++++++++++++++++
>  4 files changed, 165 insertions(+)

...

> +
> +#define EW_DELAY	150
> +#define EW_DET		270
> +#define LOW_BIT_HIGH	5
> +#define LOW_BIT_LOW	(4 * HIGH_BIT_LOW)
> +#define HIGH_BIT_LOW	5
> +#define HIGH_BIT_HIGH	(4 * HIGH_BIT_LOW)
> +#define DS		5
> +#define EOD_L		10
> +#define EOD_H		350
> +#define PWR_DOWN_DELAY	2600
> +
> +#define KTD2801_DEFAULT_BRIGHTNESS	100
> +#define KTD2801_MAX_BRIGHTNESS		255
> +
> +struct ktd2801_backlight {
> +	struct device *dev;
> +	struct backlight_device *bd;
> +	struct gpio_desc *desc;

s/desc/enable_gpio/ or something similar. desc is totally not related.

> +	bool was_on;
> +};
> +
> +static int ktd2801_update_status(struct backlight_device *bd)
> +{
> +	struct ktd2801_backlight *ktd2801 = bl_get_data(bd);
> +	u8 brightness = (u8) backlight_get_brightness(bd);
> +
> +	if (backlight_is_blank(bd)) {
> +		gpiod_set_value(ktd2801->desc, 1);
> +		udelay(PWR_DOWN_DELAY);
> +		ktd2801->was_on = false;
> +		return 0;
> +	}
> +
> +	if (!ktd2801->was_on) {
> +		gpiod_set_value(ktd2801->desc, 0);
> +		udelay(EW_DELAY);
> +		gpiod_set_value(ktd2801->desc, 1);
> +		udelay(EW_DET);
> +		gpiod_set_value(ktd2801->desc, 0);
> +		ktd2801->was_on = true;
> +	}
> +
> +	gpiod_set_value(ktd2801->desc, 0);
> +	udelay(DS);
> +
> +	for (int i = 0; i < 8; i++) {
> +		u8 next_bit = (brightness & 0x80) >> 7;
> +
> +		if (!next_bit) {
> +			gpiod_set_value(ktd2801->desc, 1);
> +			udelay(LOW_BIT_LOW);
> +			gpiod_set_value(ktd2801->desc, 0);
> +			udelay(LOW_BIT_HIGH);
> +		} else {
> +			gpiod_set_value(ktd2801->desc, 1);
> +			udelay(HIGH_BIT_LOW);
> +			gpiod_set_value(ktd2801->desc, 0);
> +			udelay(HIGH_BIT_HIGH);
> +		}
> +		brightness <<= 1;
> +	}
> +	gpiod_set_value(ktd2801->desc, 1);
> +	udelay(EOD_L);
> +	gpiod_set_value(ktd2801->desc, 0);
> +	udelay(EOD_H);

Hm, why device is kept off after this? Setting 0 means enable GPIO is
logical 0.

> +	return 0;
> +}
> +
> +static const struct backlight_ops ktd2801_backlight_ops = {
> +	.update_status = ktd2801_update_status,
> +};
> +
> +static int ktd2801_backlight_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct backlight_device *bd;
> +	struct ktd2801_backlight *ktd2801;
> +	u32 brightness, max_brightness;
> +	int ret;
> +
> +	ktd2801 = devm_kzalloc(dev, sizeof(*ktd2801), GFP_KERNEL);
> +	if (!ktd2801)
> +		return -ENOMEM;
> +	ktd2801->dev = dev;
> +	ktd2801->was_on = true;
> +
> +	ret = device_property_read_u32(dev, "max-brightness", &max_brightness);
> +	if (ret)
> +		max_brightness = KTD2801_MAX_BRIGHTNESS;
> +	if (max_brightness > KTD2801_MAX_BRIGHTNESS) {
> +		dev_err(dev, "illegal max brightness specified\n");
> +		max_brightness = KTD2801_MAX_BRIGHTNESS;
> +	}
> +
> +	ret = device_property_read_u32(dev, "default-brightness", &brightness);
> +	if (ret)
> +		brightness = KTD2801_DEFAULT_BRIGHTNESS;
> +	if (brightness > max_brightness) {
> +		dev_err(dev, "default brightness exceeds max\n");
> +		brightness = max_brightness;
> +	}
> +
> +	ktd2801->desc = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW);

OUT_LOW is keep it disabled, so is this intentional?

> +	if (IS_ERR(ktd2801->desc))
> +		return dev_err_probe(dev, PTR_ERR(ktd2801->desc),
> +				"failed to get backlight GPIO");
> +	gpiod_set_consumer_name(ktd2801->desc, dev_name(dev));
> +
> +	bd = devm_backlight_device_register(dev, dev_name(dev), dev, ktd2801,
> +			&ktd2801_backlight_ops, NULL);
> +	if (IS_ERR(bd))
> +		return dev_err_probe(dev, PTR_ERR(bd),
> +				"failed to register backlight");
> +
> +	bd->props.max_brightness = max_brightness;
> +	bd->props.brightness = brightness;
> +
> +	ktd2801->bd = bd;
> +	platform_set_drvdata(pdev, bd);
> +	backlight_update_status(bd);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id ktd2801_of_match[] = {
> +	{ .compatible = "kinetic,ktd2801" },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(of, ktd2801_of_match);
> +
> +static struct platform_driver ktd2801_backlight_driver = {
> +	.driver = {
> +		.name = "ktd2801-backlight",
> +		.of_match_table = ktd2801_of_match,
> +	},
> +	.probe = ktd2801_backlight_probe,
> +};
> +module_platform_driver(ktd2801_backlight_driver);
> +
> +MODULE_AUTHOR("Duje Mihanović <duje.mihanovic@xxxxxxxx>");
> +MODULE_DESCRIPTION("Kinetic KTD2801 Backlight Driver");
> +MODULE_LICENSE("GPL");
> +MODULE_ALIAS("platform:ktd2801-backlight");

You should not need MODULE_ALIAS() in normal cases. If you need it,
usually it means your device ID table is wrong.

> 

Best regards,
Krzysztof





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux