Enable the support for USB3 controller, QMP PHY and HS PHY
on SDX75 IDP.
Signed-off-by: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sdx75-idp.dts | 29 +++++++++++++++++++++++++++++
1 file changed, 29 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdx75-idp.dts b/arch/arm64/boot/dts/qcom/sdx75-idp.dts
index 10d1587..5f2ebe3 100644
--- a/arch/arm64/boot/dts/qcom/sdx75-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sdx75-idp.dts
@@ -250,6 +250,11 @@
stdout-path = "serial0:115200n8";
};
+&pm7550ba_eusb2_repeater {
+ vdd18-supply = <&vreg_l5b_1p776>;
+ vdd3-supply = <&vreg_l10b_3p08>;
+};
+
&qupv3_id_0 {
status = "okay";
};
@@ -261,3 +266,27 @@
&uart1 {
status = "okay";
};
+
+&usb {
+ status = "okay";
+};
+
+&usb_dwc3 {
+ dr_mode = "peripheral";
+};
+
+&usb_hsphy {
+ vdd-supply = <&vreg_l4b_0p88>;
+ vdda12-supply = <&vreg_l1b_1p2>;
+
+ phys = <&pm7550ba_eusb2_repeater>;
+
+ status = "okay";
+};
+
+&usb_qmpphy {
+ vdda-phy-supply = <&vreg_l4b_0p88>;
+ vdda-pll-supply = <&vreg_l1b_1p2>;
+
+ status = "okay";
+};
--
2.7.4
