Re: [PATCH v5 4/7] gpio: vf610: add i.MX8ULP of_device_id entry

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Peng,

On 23-10-02, Peng Fan wrote:
> > Subject: Re: [PATCH v5 4/7] gpio: vf610: add i.MX8ULP of_device_id entry
> > 
> > On Sun, Oct 1, 2023 at 10:23 AM Peng Fan (OSS) <peng.fan@xxxxxxxxxxx>
> > wrote:
> > >
> > > From: Peng Fan <peng.fan@xxxxxxx>
> > >
> > > i.MX8ULP/93 GPIO supports similar feature as i.MX7ULP GPIO, but
> > > i.MX8ULP is actually not hardware compatible with i.MX7ULP. i.MX8ULP
> > > only has one register base, not two bases. i.MX8ULP and i.MX93
> > > actually has two interrupts for each gpio controller, one for
> > > Trustzone non-secure world, one for secure world.
> > >
> > > Although the Linux Kernel driver gpio-vf610.c could work with
> > > fsl,imx7ulp-gpio compatible, it is based on some tricks did in device
> > > tree with some offset added to base address.
> > >
> > > Add a new of_device_id entry for i.MX8ULP. But to make the driver
> > > could also support old bindings, check the compatible string first,
> > > before check the device data.
> > >
> > > Signed-off-by: Peng Fan <peng.fan@xxxxxxx>
> > > ---
> > >  drivers/gpio/gpio-vf610.c | 47
> > > ++++++++++++++++++++++++++++++++++++++++-------
> > >  1 file changed, 40 insertions(+), 7 deletions(-)
> > >
> > > diff --git a/drivers/gpio/gpio-vf610.c b/drivers/gpio/gpio-vf610.c
> > > index dbc7ba0ee72c..8e12706c0b22 100644
> > > --- a/drivers/gpio/gpio-vf610.c
> > > +++ b/drivers/gpio/gpio-vf610.c
> > > @@ -25,6 +25,7 @@
> > >  struct fsl_gpio_soc_data {
> > >         /* SoCs has a Port Data Direction Register (PDDR) */
> > >         bool have_paddr;
> > > +       bool have_dual_base;
> > >  };
> > >
> > >  struct vf610_gpio_port {
> > > @@ -60,13 +61,26 @@ struct vf610_gpio_port {
> > >  #define PORT_INT_EITHER_EDGE   0xb
> > >  #define PORT_INT_LOGIC_ONE     0xc
> > >
> > > +#define IMX8ULP_GPIO_BASE_OFF  0x40
> > > +#define IMX8ULP_BASE_OFF       0x80
> > > +
> > > +static const struct fsl_gpio_soc_data vf610_data = {
> > > +       .have_dual_base = true,
> > > +};
> > > +
> > >  static const struct fsl_gpio_soc_data imx_data = {
> > >         .have_paddr = true,
> > > +       .have_dual_base = true,
> > > +};
> > > +
> > > +static const struct fsl_gpio_soc_data imx8ulp_data = {
> > > +       .have_paddr = true,
> > >  };
> > >
> > >  static const struct of_device_id vf610_gpio_dt_ids[] = {
> > > -       { .compatible = "fsl,vf610-gpio",       .data = NULL, },
> > > +       { .compatible = "fsl,vf610-gpio",       .data = &vf610_data },
> > >         { .compatible = "fsl,imx7ulp-gpio",     .data = &imx_data, },
> > > +       { .compatible = "fsl,imx8ulp-gpio",     .data = &imx8ulp_data, },
> > >         { /* sentinel */ }
> > >  };
> > >
> > > @@ -263,19 +277,38 @@ static int vf610_gpio_probe(struct
> > platform_device *pdev)
> > >         struct gpio_irq_chip *girq;
> > >         int i;
> > >         int ret;
> > > +       bool dual_base;
> > >
> > >         port = devm_kzalloc(dev, sizeof(*port), GFP_KERNEL);
> > >         if (!port)
> > >                 return -ENOMEM;
> > >
> > >         port->sdata = of_device_get_match_data(dev);
> > > -       port->base = devm_platform_ioremap_resource(pdev, 0);
> > > -       if (IS_ERR(port->base))
> > > -               return PTR_ERR(port->base);
> > >
> > > -       port->gpio_base = devm_platform_ioremap_resource(pdev, 1);
> > > -       if (IS_ERR(port->gpio_base))
> > > -               return PTR_ERR(port->gpio_base);
> > > +       dual_base = port->sdata->have_dual_base;
> > > +
> > > +       /* support old compatible strings */
> > > +       if (device_is_compatible(dev, "fsl,imx7ulp-gpio") &&
> > > +           (device_is_compatible(dev, "fsl,imx93-gpio") ||
> > 
> > Why not just add this compatible to vf610_gpio_dt_ids?
> 
> "fsl,imx93-gpio", "fsl,imx7ulp-gpio" is not a correct entry
> combination. This is to support legacy old compatible
> strings.

The "/* support old compatible strings */" may a bit misleading here?
Should we be a bit more verbose for the reader of the code, e.g.:

		/*
		 * Handle legacy compatible combinations which used two
		 * reg values for the i.MX8ULP and i.MX93.
		 */

Regards,
  Marco

> 
> Thanks,
> Peng.
> > 
> > Bart
> > 
> > > +           (device_is_compatible(dev, "fsl,imx8ulp-gpio"))))
> > > +               dual_base = true;
> > > +
> > > +       if (dual_base) {
> > > +               port->base = devm_platform_ioremap_resource(pdev, 0);
> > > +               if (IS_ERR(port->base))
> > > +                       return PTR_ERR(port->base);
> > > +
> > > +               port->gpio_base = devm_platform_ioremap_resource(pdev, 1);
> > > +               if (IS_ERR(port->gpio_base))
> > > +                       return PTR_ERR(port->gpio_base);
> > > +       } else {
> > > +               port->base = devm_platform_ioremap_resource(pdev, 0);
> > > +               if (IS_ERR(port->base))
> > > +                       return PTR_ERR(port->base);
> > > +
> > > +               port->gpio_base = port->base + IMX8ULP_GPIO_BASE_OFF;
> > > +               port->base = port->base + IMX8ULP_BASE_OFF;
> > > +       }
> > >
> > >         port->irq = platform_get_irq(pdev, 0);
> > >         if (port->irq < 0)
> > >
> > > --
> > > 2.37.1
> > >




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux