RE: [PATCH v3 1/2] dt-bindings: backlight: Add MPS MP3309C

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Daniel,

...
> > > > +required:
> > > > +  - compatible
> > > > +  - reg
> > > > +  - max-brightness
> > >
> > > Why is this mandatory?
> > >
> > > There's no point in setting max-brightness when running in I2C mode
> > > (max- brightness should default to 31 in that case).
> > >
> > >
> > > > +  - default-brightness
> > >
> > > Again. I'm not clear why this needs to be mandatory.
> > >
> > >
> >
> > Ok, you are right, I'll remove max-brightness and default-brightness
> > from required properties list. I think to change these properties, for
> > the pwm dimming, into a clearer:
> >
> > - brightness-levels (uint32)
> > - default-brightness-levels (uint32).
> >
> > For example:
> >
> >   brightness-levels:
> >     description:
> >       Number of brightness levels. The actual brightness
> >       level (PWM duty cycle) will be interpolated from 0 to this value.
> >       0 means a  0% duty cycle (darkest/off), while the brightness-levels
> represents
> >       a 100% duty cycle (brightest).
> >     $ref: /schemas/types.yaml#/definitions/uint32
> >
> >   default-brightness-level:
> >     description:
> >       The default brightness level (from 0 to brightness-levels)
> >     $ref: /schemas/types.yaml#/definitions/uint32
> >
> > Example:
> > brightness-levels = <10>;
> > default-brightness-level = <6>;
> >
> > What do you think about this solution?
> 
> If you want to introduce a brightness-levels property then I would expect it to
> be defined with the same meaning as pwm-backlight (it's not relevant to the
> bindings but ideally it would be implemented by refactoring and reusing the
> code from pwm_bl.c).

ok, I'll use the brightness-levels property as used in pwm-backlight

> 
> Same with default-brightness-level although I'm not sure why one wouldn't
> just use default-brightness for new bindings (doesn't default-brightness-level
> simply do exactly the same thing as default-brightness).

ok for default-brightness instead of default-brightness-level

> 
> 
> Daniel.

Thanks an best regards,
Flavio





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux