Re: [PATCH 1/8] dt-bindings: phy: qcom,uniphy-usb: Document qcom,uniphy-usb phy

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 9/30/2023 8:26 PM, Krzysztof Kozlowski wrote:
On 29/09/2023 10:42, Praveenkumar I wrote:
Document the Qualcomm USB3 22ull UNIPHY present in IPQ5332.

Signed-off-by: Praveenkumar I <quic_ipkumar@xxxxxxxxxxx>
---
  .../bindings/phy/qcom,ipq5332-usb-uniphy.yaml | 83 +++++++++++++++++++
  1 file changed, 83 insertions(+)
  create mode 100644 Documentation/devicetree/bindings/phy/qcom,ipq5332-usb-uniphy.yaml
Filename should match compatible.
Will address it.

diff --git a/Documentation/devicetree/bindings/phy/qcom,ipq5332-usb-uniphy.yaml b/Documentation/devicetree/bindings/phy/qcom,ipq5332-usb-uniphy.yaml
new file mode 100644
index 000000000000..90434cee9cdd
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,ipq5332-usb-uniphy.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/qcom,ipq5332-usb-uniphy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm USB Super-Speed UNIPHY
+
+maintainers:
+  - Praveenkumar I <quic_ipkumar@xxxxxxxxxxx>
+  - Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
+
+description:
+  USB Super-Speed UNIPHY found in Qualcomm IPQ5332, IPQ5018 SoCs.
+
+properties:
+  compatible:
+    items:
Drop items, not needed.
Sure, will drop.

+      - const: qcom,ipq5332-usb-ssphy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: ahb
+      - const: cfg_ahb
+      - const: pipe
+
+  resets:
+    maxItems: 1
+
+  vdd-supply:
+    description:
+      Phandle to 5V regulator supply to PHY digital circuit.
+
+  qcom,phy-usb-mux-sel:
+    description: PHY Mux Selection for USB
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle of TCSR syscon
+          - description: offset of PHY Mux selection register
+
+  "#clock-cells":
+    const: 0
+
+  clock-output-names:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
You miss required: block.
Sure, will add.

--
Thanks,
Praveenkumar

Best regards,
Krzysztof






[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux