Re: [PATCH v2 2/4] usb: ucsi: glink: use the connector orientation GPIO to provide switch events

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 3 Oct 2023 at 10:13, Neil Armstrong <neil.armstrong@xxxxxxxxxx> wrote:
>
> On 02/10/2023 19:26, Dmitry Baryshkov wrote:
> > On Mon, 2 Oct 2023 at 13:21, Neil Armstrong <neil.armstrong@xxxxxxxxxx> wrote:
> >>
> >> On SM8550, the non-altmode orientation is not given anymore within
> >> altmode events, even with USB SVIDs events.
> >>
> >> On the other side, the Type-C connector orientation is correctly
> >> reported by a signal from the PMIC.
> >>
> >> Take this gpio signal when we detect some Type-C port activity
> >> to notify any Type-C switches tied to the Type-C port connectors.
> >
> > Have you checked, which UCSI version is implemented on SM8550?
> > Is there any chance of GET_CONNECTOR_STATUS / bit 86 actually
> > reflecting the correct orientation?
>
> I checked, and no, the UCSI implementation is based on the UCSI 1.x spec,
> and doesn't have the UCSI 2.x new bits.

Ack, thanks for the confirmation.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>

>
> Neil
>
> >
> >>
> >> Acked-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
> >> Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
> >> ---
> >
> >
>


-- 
With best wishes
Dmitry




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux