On Mon, 02 Oct 2023 17:32:21 -0500, Shawn Anastasio wrote: > The SIE Cronos Platform Controller CPLD is a multi-purpose platform > controller that provides both a watchdog timer and an LED controller. As > both functions are provided by the same CPLD, a multi-function device is > exposed as the parent of both functions. > > Add a DT binding for this device. > > Signed-off-by: Shawn Anastasio <sanastasio@xxxxxxxxxxxxxxxxxxxxx> > --- > .../bindings/mfd/sie,cronos-cpld.yaml | 67 +++++++++++++++++++ > 1 file changed, 67 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mfd/sie,cronos-cpld.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: Documentation/devicetree/bindings/mfd/sie,cronos-cpld.example.dts:20.11-24: Warning (reg_format): /example-0/cpld@3f:reg: property has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1) Documentation/devicetree/bindings/mfd/sie,cronos-cpld.example.dtb: Warning (pci_device_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/mfd/sie,cronos-cpld.example.dtb: Warning (pci_device_bus_num): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/mfd/sie,cronos-cpld.example.dtb: Warning (simple_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/mfd/sie,cronos-cpld.example.dtb: Warning (i2c_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/mfd/sie,cronos-cpld.example.dtb: Warning (spi_bus_reg): Failed prerequisite 'reg_format' doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/8b014f8b302f8b41c45c4f6fb114cf18e84a76fa.1696285339.git.sanastasio@xxxxxxxxxxxxxxxxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
