Re: [PATCH V3 2/2] drm/panel: nv3051d: Add Support for Anbernic 351V

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 10/2/2023 12:30 PM, Chris Morgan wrote:
From: Chris Morgan <macromorgan@xxxxxxxxxxx>

Add support for the Anbernic 351V. Just like the 353 series the
underlying vendor is unknown/unmarked (at least not visible in a
non-destructive manner). The panel had slightly different init
sequences and timings in the BSP kernel, but works fine with the
same ones used in the existing driver. The panel will not work without
the inclusion of the MIPI_DSI_CLOCK_NON_CONTINUOUS flag, and this flag
prevents the 353 series from working correctly, so a new compatible
string is added.

Tested colors and timings using modetest and all seem to work identical
to the 353 otherwise.

Signed-off-by: Chris Morgan <macromorgan@xxxxxxxxxxx>
---
  drivers/gpu/drm/panel/panel-newvision-nv3051d.c | 8 ++++++++
  1 file changed, 8 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-newvision-nv3051d.c b/drivers/gpu/drm/panel/panel-newvision-nv3051d.c
index ad98dd9322b4..f644dbc8ee8a 100644
--- a/drivers/gpu/drm/panel/panel-newvision-nv3051d.c
+++ b/drivers/gpu/drm/panel/panel-newvision-nv3051d.c
@@ -354,6 +354,7 @@ static const struct drm_panel_funcs panel_nv3051d_funcs = {
  static int panel_nv3051d_probe(struct mipi_dsi_device *dsi)
  {
  	struct device *dev = &dsi->dev;
+	struct device_node *np = dev->of_node;

Hi Chris,

Thanks for the patch.

It mostly looks good to me, but just one question here -- why not pass in `dev->of_node` directly into `of_device_is_compatible()`?

Thanks,

Jessica Zhang

  	struct panel_nv3051d *ctx;
  	int ret;
@@ -388,6 +389,13 @@ static int panel_nv3051d_probe(struct mipi_dsi_device *dsi)
  	dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
  			  MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_NO_EOT_PACKET;
+ /*
+	 * The panel in the RG351V is identical to the 353P, except it
+	 * requires MIPI_DSI_CLOCK_NON_CONTINUOUS to operate correctly.
+	 */
+	if (of_device_is_compatible(np, "anbernic,rg351v-panel"))
+		dsi->mode_flags |= MIPI_DSI_CLOCK_NON_CONTINUOUS; > +
  	drm_panel_init(&ctx->panel, &dsi->dev, &panel_nv3051d_funcs,
  		       DRM_MODE_CONNECTOR_DSI);
--
2.34.1





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux