Convert the binding for the Marvell PXA1928 USB and HSIC PHYs from TXT to DT schema. Signed-off-by: Duje Mihanović <duje.mihanovic@xxxxxxxx> --- Changes in v2: - Add myself as maintainer - Combine HSIC and USB bindings into one - Drop unneeded quotes - Remove example as it can't compile (probably because of clock reference) - Link to v1: https://lore.kernel.org/r/20231001-pxa1928-usb-yaml-v1-1-9309a8c0c03f@xxxxxxxx --- .../bindings/phy/marvell,pxa1928-usb-phy.yaml | 41 ++++++++++++++++++++++ .../devicetree/bindings/phy/pxa1928-usb-phy.txt | 18 ---------- 2 files changed, 41 insertions(+), 18 deletions(-) diff --git a/Documentation/devicetree/bindings/phy/marvell,pxa1928-usb-phy.yaml b/Documentation/devicetree/bindings/phy/marvell,pxa1928-usb-phy.yaml new file mode 100644 index 000000000000..60cf3fa8d3bc --- /dev/null +++ b/Documentation/devicetree/bindings/phy/marvell,pxa1928-usb-phy.yaml @@ -0,0 +1,41 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/marvell,pxa1928-usb-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell PXA1928 USB/HSIC PHY + +maintainers: + - Duje Mihanović <duje.mihanovic@xxxxxxxx> + +properties: + $nodename: + pattern: '^phy@[a-f0-9]+$' + + compatible: + oneOf: + - items: + const: marvell,pxa1928-usb-phy + - items: + const: marvell,pxa1928-hsic-phy + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + '#phy-cells': + const: 0 + + resets: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - '#phy-cells' + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/phy/pxa1928-usb-phy.txt b/Documentation/devicetree/bindings/phy/pxa1928-usb-phy.txt deleted file mode 100644 index da94426aa694..000000000000 --- a/Documentation/devicetree/bindings/phy/pxa1928-usb-phy.txt +++ /dev/null @@ -1,18 +0,0 @@ -* Marvell PXA1928 USB and HSIC PHYs - -Required properties: -- compatible: "marvell,pxa1928-usb-phy" or "marvell,pxa1928-hsic-phy" -- reg: base address and length of the registers -- clocks - A single clock. From common clock binding. -- #phys-cells: should be 0. From common phy binding. -- resets: reference to the reset controller - -Example: - - usbphy: phy@7000 { - compatible = "marvell,pxa1928-usb-phy"; - reg = <0x7000 0xe0>; - clocks = <&apmu_clocks PXA1928_CLK_USB>; - #phy-cells = <0>; - }; - --- base-commit: 6465e260f48790807eef06b583b38ca9789b6072 change-id: 20231001-pxa1928-usb-yaml-809564082241 Best regards, -- Duje Mihanović <duje.mihanovic@xxxxxxxx>