On Thu, Sep 28, 2023 at 03:02:59PM -0400, Hugo Villeneuve wrote: > From: Hugo Villeneuve <hvilleneuve@xxxxxxxxxxxx> > > Variable DT_SCHEMA_FILES can specify multiple files, but the > documentation does not indicate how to do it. Each entry needs to be > separated by a column symbol ':'. > > Add an example to make it more obvious how to specify multiple > DT_SCHEMA_FILES. > > Signed-off-by: Hugo Villeneuve <hvilleneuve@xxxxxxxxxxxx> > --- > Documentation/devicetree/bindings/writing-schema.rst | 4 +++- > 1 file changed, 3 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/writing-schema.rst b/Documentation/devicetree/bindings/writing-schema.rst > index 4a381d20f2b4..a500d3c2e12e 100644 > --- a/Documentation/devicetree/bindings/writing-schema.rst > +++ b/Documentation/devicetree/bindings/writing-schema.rst > @@ -159,11 +159,13 @@ It is possible to run both in a single command:: > make dt_binding_check dtbs_check > > It is also possible to run checks with a subset of matching schema files by > -setting the ``DT_SCHEMA_FILES`` variable to a specific schema file or pattern. > +setting the ``DT_SCHEMA_FILES`` variable to a specific schema file, multiple > +schema files or pattern. And multiple patterns. I would say: ... to 1 or more specific schema files or patterns (partial match of a fixed string). Each file or pattern should be separated by ':'. > > :: > > make dt_binding_check DT_SCHEMA_FILES=trivial-devices.yaml > + make dt_binding_check DT_SCHEMA_FILES=trivial-devices.yaml:rtc.yaml > make dt_binding_check DT_SCHEMA_FILES=/gpio/ > make dtbs_check DT_SCHEMA_FILES=trivial-devices.yaml > > > base-commit: 633b47cb009d09dc8f4ba9cdb3a0ca138809c7c7 > -- > 2.30.2 >
