Re: [PATCH v3 2/2] dt-bindings: usb: gpio-sbu-mux: Make 'mode-switch' not required

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Conor,

On Thu, Sep 28, 2023 at 2:04 PM Conor Dooley <conor@xxxxxxxxxx> wrote:
>
> On Wed, Sep 27, 2023 at 09:35:11AM -0300, Fabio Estevam wrote:
> > From: Fabio Estevam <festevam@xxxxxxx>
> >
> > On a i.MX8QXP MEK board that has an NXP CBDTU02043 mux, there is
> > no mode-switch, only an orientation switch.
> >
> > Make the 'mode-switch' property a non-required one.
>
> There seem to be very few compatibles in this file, so I guess
> everything uses the generic compatible. I'm not expecting you to know
> why it's like this, but should we add a compatible for this particular
> mux & only relax the requirement for it specifically?

I am not sure.

Bjorn, do you have any suggestions, please?

> > Signed-off-by: Fabio Estevam <festevam@xxxxxxx>
> > ---
> > Changes since v2:
> > - Newly introduced.
> >
> >  Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml | 1 -
> >  1 file changed, 1 deletion(-)
> >
> > diff --git a/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml b/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml
> > index b61dcf8b4aad..d3b2b666ec2a 100644
> > --- a/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml
> > +++ b/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml
> > @@ -51,7 +51,6 @@ required:
> >    - compatible
> >    - enable-gpios
> >    - select-gpios
> > -  - mode-switch
> >    - orientation-switch
> >    - port
> >
> > --
> > 2.34.1
> >





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux