[PATCH 1/7] media: bindings: hynix,hi846: Add video-interface-device properties

[Jacopo Mondi <jacopo.mondi@xxxxxxxxxxxxxxxx>]

Allow properties from video-interface-device.yaml for the SK Hynix Hi-846
sensor.

All properties specified in video-interface-device.yaml schema are
valid, so make them accepted by changing "additionalProperties: false"
to "unevaluatedProperties: false" at the schema top-level.

Add two properties from video-interface-device.yaml to the example
to validate the new schema.

Signed-off-by: Jacopo Mondi <jacopo.mondi@xxxxxxxxxxxxxxxx>
---
 .../devicetree/bindings/media/i2c/hynix,hi846.yaml         | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml b/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml
index 1e2df8cf2937..60f19e1152b3 100644
--- a/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml
@@ -14,6 +14,9 @@ description: |-
   interface and CCI (I2C compatible) control bus. The output format
   is raw Bayer.

+allOf:
+  - $ref: /schemas/media/video-interface-devices.yaml#
+
 properties:
   compatible:
     const: hynix,hi846
@@ -86,7 +89,7 @@ required:
   - vddd-supply
   - port

-additionalProperties: false
+unevaluatedProperties: false

 examples:
   - |
@@ -109,6 +112,8 @@ examples:
             vddio-supply = <&reg_camera_vddio>;
             reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
             shutdown-gpios = <&gpio5 4 GPIO_ACTIVE_LOW>;
+            orientation = <0>;
+            rotation = <0>;

             port {
                 camera_out: endpoint {
--
2.42.0