On Thu, 28 Sep 2023, Max Filippov wrote:
> uart_get_baud_rate has input parameters 'min' and 'max' limiting the
> range of acceptable baud rates from the caller's perspective. If neither
> current or old termios structures have acceptable baud rate setting and
> 9600 is not in the min/max range either the function returns 0 and
> issues a warning.
> However for a UART that does not support speed of 9600 baud this is
> expected behavior.
> Clarify that 0 can be (and always could be) returned from the
> uart_get_baud_rate. Don't issue a warning in that case.
> Move the warinng to the uart_get_divisor instead, which is often called
> with the uart_get_baud_rate return value.
>
> Signed-off-by: Max Filippov <jcmvbkbc@xxxxxxxxx>
> ---
> Changes v3->v4:
> - drop WARN_ON from uart_get_divisor()
>
> drivers/tty/serial/serial_core.c | 4 +---
> 1 file changed, 1 insertion(+), 3 deletions(-)
>
> diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
> index 7bdc21d5e13b..3f130fe9f1a0 100644
> --- a/drivers/tty/serial/serial_core.c
> +++ b/drivers/tty/serial/serial_core.c
> @@ -431,7 +431,7 @@ EXPORT_SYMBOL(uart_update_timeout);
> * baud.
> *
> * If the new baud rate is invalid, try the @old termios setting. If it's still
> - * invalid, we try 9600 baud.
> + * invalid, we try 9600 baud. If that is also invalid 0 is returned.
> *
> * The @termios structure is updated to reflect the baud rate we're actually
> * going to be using. Don't do this for the case where B0 is requested ("hang
> @@ -515,8 +515,6 @@ uart_get_baud_rate(struct uart_port *port, struct ktermios *termios,
> max - 1, max - 1);
> }
> }
> - /* Should never happen */
> - WARN_ON(1);
> return 0;
> }
> EXPORT_SYMBOL(uart_get_baud_rate);
While looking into this, I found this old commit:
commit 16ae2a877bf4179737921235e85ceffd7b79354f
Author: Alan Cox <alan@xxxxxxxxxxxxxxx>
Date: Mon Jan 4 16:26:21 2010 +0000
serial: Fix crash if the minimum rate of the device is > 9600 baud
In that situation if the old rate is invalid and the new rate is invalid
and the chip cannot do 9600 baud we report zero, which makes all the
drivers explode.
Instead force the rate based on min/max
But for some reason it does not work as advertized here? What is the exact
cause for that?
Is something wrong with how min/max have that +1/-1 there or what?
--
i.
