Hi Uwe Kleine-König, On Wed, Sep 27, 2023 at 3:27 PM Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx> wrote: > > Hello, > > On Mon, Sep 18, 2023 at 01:33:14PM +0530, Jagath Jog J wrote: > > The Bosch BMI323 is a 6-axis low-power IMU that provide measurements for > > acceleration, angular rate, and temperature. This sensor includes > > motion-triggered interrupt features, such as a step counter, tap detection, > > and activity/inactivity interrupt capabilities. > > > > The driver supports various functionalities, including data ready, FIFO > > data handling, and events such as tap detection, step counting, and > > activity interrupts > > > > Datasheet: https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmi323-ds000.pdf > > Maybe put this link better in the driver. Yes, if there are multiple commits on the driver, the datasheet link will move further down with the initial commit. I will add datasheet link in the driver. > > > +static struct i2c_driver bmi323_i2c_driver = { > > + .driver = { > > + .name = "bmi323", > > + .of_match_table = bmi323_of_i2c_match, > > + }, > > + .probe_new = bmi323_i2c_probe, > > + .id_table = bmi323_i2c_ids, > > +}; > > +module_i2c_driver(bmi323_i2c_driver); > > If you want to compile this driver after v6.6-rc2 (which includes > commit 5eb1e6e459cf ("i2c: Drop legacy callback .probe_new()")) better > use .probe here instead of .probe_new(). Thanks for pointing it out. I switched to v6.6-rc3 and I will change to .probe. Regards Jagath Jagath > > Best regards > Uwe > > -- > Pengutronix e.K. | Uwe Kleine-König | > Industrial Linux Solutions | https://www.pengutronix.de/ |
