Re: [PATCH v3 1/2] dt-bindings: PCI: mediatek-gen3: Add support for controlling power and reset

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 28 Sep 2023 18:58:20 +0800, Jian Yang wrote:
> From: "jian.yang" <jian.yang@xxxxxxxxxxxx>
> 
> Add new properties to support control power supplies and reset pin of
> a downstream component.
> 
> Signed-off-by: jian.yang <jian.yang@xxxxxxxxxxxx>
> ---
>  .../bindings/pci/mediatek-pcie-gen3.yaml      | 25 +++++++++++++++++++
>  1 file changed, 25 insertions(+)
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.example.dts:72.24-75.19: Warning (unit_address_vs_reg): /example-0/bus/pcie@11230000/pcie@0: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.example.dts:72.24-75.19: Warning (pci_bridge): /example-0/bus/pcie@11230000/pcie@0: missing ranges for PCI bridge (or not a bridge)
Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.example.dts:72.24-75.19: Warning (pci_bridge): /example-0/bus/pcie@11230000/pcie@0: incorrect #address-cells for PCI bridge
Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.example.dts:72.24-75.19: Warning (pci_bridge): /example-0/bus/pcie@11230000/pcie@0: incorrect #size-cells for PCI bridge
Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.example.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge'
Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.example.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge'
Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.example.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge'
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.example.dtb: pcie@11230000: pcie@0: 'reg' is a required property
	from schema $id: http://devicetree.org/schemas/pci/mediatek-pcie-gen3.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.example.dtb: pcie@11230000: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'bus-range', 'device_type', 'interrupt-map', 'interrupt-map-mask', 'pcie@0' were unexpected)
	from schema $id: http://devicetree.org/schemas/pci/mediatek-pcie-gen3.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.example.dtb: pcie@11230000: pcie@0: 'reg' is a required property
	from schema $id: http://devicetree.org/schemas/pci/pci-bus.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.example.dtb: pcie@0: 'ranges' is a required property
	from schema $id: http://devicetree.org/schemas/pci/pci-bus.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.example.dtb: pcie@0: 'reg' is a required property
	from schema $id: http://devicetree.org/schemas/pci/pci-bus.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.example.dtb: pcie@0: '#address-cells' is a required property
	from schema $id: http://devicetree.org/schemas/pci/pci-bus.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.example.dtb: pcie@0: '#size-cells' is a required property
	from schema $id: http://devicetree.org/schemas/pci/pci-bus.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230928105819.5161-2-jian.yang@xxxxxxxxxxxx

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux