Move pm8921 device nodes to follow the alphanumberic sorting order.
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
arch/arm/boot/dts/qcom/pm8921.dtsi | 48 +++++++++++++++---------------
1 file changed, 24 insertions(+), 24 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/pm8921.dtsi b/arch/arm/boot/dts/qcom/pm8921.dtsi
index ad41d99ab265..4697ca33666f 100644
--- a/arch/arm/boot/dts/qcom/pm8921.dtsi
+++ b/arch/arm/boot/dts/qcom/pm8921.dtsi
@@ -8,17 +8,14 @@ pm8921: pmic {
#address-cells = <1>;
#size-cells = <0>;
- pm8921_gpio: gpio@150 {
-
- compatible = "qcom,pm8921-gpio",
- "qcom,ssbi-gpio";
- reg = <0x150>;
- interrupt-controller;
- #interrupt-cells = <2>;
- gpio-controller;
- gpio-ranges = <&pm8921_gpio 0 0 44>;
- #gpio-cells = <2>;
-
+ pwrkey@1c {
+ compatible = "qcom,pm8921-pwrkey";
+ reg = <0x1c>;
+ interrupt-parent = <&pm8921>;
+ interrupts = <50 IRQ_TYPE_EDGE_RISING>,
+ <51 IRQ_TYPE_EDGE_RISING>;
+ debounce = <15625>;
+ pull-up;
};
pm8921_mpps: mpps@50 {
@@ -32,14 +29,12 @@ pm8921_mpps: mpps@50 {
#interrupt-cells = <2>;
};
- pwrkey@1c {
- compatible = "qcom,pm8921-pwrkey";
- reg = <0x1c>;
+ rtc@11d {
+ compatible = "qcom,pm8921-rtc";
interrupt-parent = <&pm8921>;
- interrupts = <50 IRQ_TYPE_EDGE_RISING>,
- <51 IRQ_TYPE_EDGE_RISING>;
- debounce = <15625>;
- pull-up;
+ interrupts = <39 IRQ_TYPE_EDGE_RISING>;
+ reg = <0x11d>;
+ allow-set-time;
};
pm8921_keypad: keypad@148 {
@@ -53,12 +48,17 @@ pm8921_keypad: keypad@148 {
row-hold = <91500>;
};
- rtc@11d {
- compatible = "qcom,pm8921-rtc";
- interrupt-parent = <&pm8921>;
- interrupts = <39 IRQ_TYPE_EDGE_RISING>;
- reg = <0x11d>;
- allow-set-time;
+ pm8921_gpio: gpio@150 {
+
+ compatible = "qcom,pm8921-gpio",
+ "qcom,ssbi-gpio";
+ reg = <0x150>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pm8921_gpio 0 0 44>;
+ #gpio-cells = <2>;
+
};
pm8921_xoadc: xoadc@197 {
--
2.39.2
