The PMIC is not a part of the SoC, so move PMIC to a separate file and
include it from the board files.
Suggested-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Acked-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
arch/arm/boot/dts/qcom/pm8058.dtsi | 160 ++++++++++++++++++
.../dts/qcom/qcom-apq8060-dragonboard.dts | 1 +
arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts | 1 +
arch/arm/boot/dts/qcom/qcom-msm8660.dtsi | 149 +---------------
4 files changed, 163 insertions(+), 148 deletions(-)
create mode 100644 arch/arm/boot/dts/qcom/pm8058.dtsi
diff --git a/arch/arm/boot/dts/qcom/pm8058.dtsi b/arch/arm/boot/dts/qcom/pm8058.dtsi
new file mode 100644
index 000000000000..ad581c3bcbd2
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/pm8058.dtsi
@@ -0,0 +1,160 @@
+// SPDX-License-Identifier: GPL-2.0
+
+&ssbi {
+ pm8058: pmic {
+ compatible = "qcom,pm8058";
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pm8058_gpio: gpio@150 {
+ compatible = "qcom,pm8058-gpio",
+ "qcom,ssbi-gpio";
+ reg = <0x150>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pm8058_gpio 0 0 44>;
+ #gpio-cells = <2>;
+ };
+
+ pm8058_mpps: mpps@50 {
+ compatible = "qcom,pm8058-mpp",
+ "qcom,ssbi-mpp";
+ reg = <0x50>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pm8058_mpps 0 0 12>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pwrkey@1c {
+ compatible = "qcom,pm8058-pwrkey";
+ reg = <0x1c>;
+ interrupt-parent = <&pm8058>;
+ interrupts = <50 1>, <51 1>;
+ debounce = <15625>;
+ pull-up;
+ };
+
+ pm8058_keypad: keypad@148 {
+ compatible = "qcom,pm8058-keypad";
+ reg = <0x148>;
+ interrupt-parent = <&pm8058>;
+ interrupts = <74 1>, <75 1>;
+ debounce = <15>;
+ scan-delay = <32>;
+ row-hold = <91500>;
+ };
+
+ pm8058_xoadc: xoadc@197 {
+ compatible = "qcom,pm8058-adc";
+ reg = <0x197>;
+ interrupts-extended = <&pm8058 76 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ #io-channel-cells = <2>;
+
+ vcoin: adc-channel@0 {
+ reg = <0x00 0x00>;
+ };
+
+ vbat: adc-channel@1 {
+ reg = <0x00 0x01>;
+ };
+
+ dcin: adc-channel@2 {
+ reg = <0x00 0x02>;
+ };
+
+ ichg: adc-channel@3 {
+ reg = <0x00 0x03>;
+ };
+
+ vph_pwr: adc-channel@4 {
+ reg = <0x00 0x04>;
+ };
+
+ usb_vbus: adc-channel@a {
+ reg = <0x00 0x0a>;
+ };
+
+ die_temp: adc-channel@b {
+ reg = <0x00 0x0b>;
+ };
+
+ ref_625mv: adc-channel@c {
+ reg = <0x00 0x0c>;
+ };
+
+ ref_1250mv: adc-channel@d {
+ reg = <0x00 0x0d>;
+ };
+
+ ref_325mv: adc-channel@e {
+ reg = <0x00 0x0e>;
+ };
+
+ ref_muxoff: adc-channel@f {
+ reg = <0x00 0x0f>;
+ };
+ };
+
+ rtc@1e8 {
+ compatible = "qcom,pm8058-rtc";
+ reg = <0x1e8>;
+ interrupt-parent = <&pm8058>;
+ interrupts = <39 1>;
+ allow-set-time;
+ };
+
+ vibrator@4a {
+ compatible = "qcom,pm8058-vib";
+ reg = <0x4a>;
+ };
+
+ pm8058_led48: led@48 {
+ compatible = "qcom,pm8058-keypad-led";
+ reg = <0x48>;
+ status = "disabled";
+ };
+
+ pm8058_led131: led@131 {
+ compatible = "qcom,pm8058-led";
+ reg = <0x131>;
+ status = "disabled";
+ };
+
+ pm8058_led132: led@132 {
+ compatible = "qcom,pm8058-led";
+ reg = <0x132>;
+ status = "disabled";
+ };
+
+ pm8058_led133: led@133 {
+ compatible = "qcom,pm8058-led";
+ reg = <0x133>;
+ status = "disabled";
+ };
+ };
+};
+
+/ {
+ /*
+ * These channels from the ADC are simply hardware monitors.
+ * That is why the ADC is referred to as "HKADC" - HouseKeeping
+ * ADC.
+ */
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&pm8058_xoadc 0x00 0x01>, /* Battery */
+ <&pm8058_xoadc 0x00 0x02>, /* DC in (charger) */
+ <&pm8058_xoadc 0x00 0x04>, /* VPH the main system voltage */
+ <&pm8058_xoadc 0x00 0x0b>, /* Die temperature */
+ <&pm8058_xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
+ <&pm8058_xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
+ <&pm8058_xoadc 0x00 0x0e>; /* Reference voltage 0.325V */
+ };
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts
index e4261d729d35..10b8f529c337 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts
@@ -5,6 +5,7 @@
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
#include "qcom-msm8660.dtsi"
+#include "pm8058.dtsi"
/ {
model = "Qualcomm APQ8060 Dragonboard";
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts
index a5441aecd637..be2fbc1e0950 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts
@@ -2,6 +2,7 @@
#include <dt-bindings/input/input.h>
#include "qcom-msm8660.dtsi"
+#include "pm8058.dtsi"
/ {
model = "Qualcomm MSM8660 SURF";
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi
index 84b0366792d4..eef4712bbcc4 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi
@@ -73,22 +73,6 @@ sleep-clk {
};
};
- /*
- * These channels from the ADC are simply hardware monitors.
- * That is why the ADC is referred to as "HKADC" - HouseKeeping
- * ADC.
- */
- iio-hwmon {
- compatible = "iio-hwmon";
- io-channels = <&pm8058_xoadc 0x00 0x01>, /* Battery */
- <&pm8058_xoadc 0x00 0x02>, /* DC in (charger) */
- <&pm8058_xoadc 0x00 0x04>, /* VPH the main system voltage */
- <&pm8058_xoadc 0x00 0x0b>, /* Die temperature */
- <&pm8058_xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
- <&pm8058_xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
- <&pm8058_xoadc 0x00 0x0e>; /* Reference voltage 0.325V */
- };
-
soc: soc {
#address-cells = <1>;
#size-cells = <1>;
@@ -334,141 +318,10 @@ ebi2: external-bus@1a100000 {
status = "disabled";
};
- ssbi@500000 {
+ ssbi: ssbi@500000 {
compatible = "qcom,ssbi";
reg = <0x500000 0x1000>;
qcom,controller-type = "pmic-arbiter";
-
- pm8058: pmic {
- compatible = "qcom,pm8058";
- #interrupt-cells = <2>;
- interrupt-controller;
- #address-cells = <1>;
- #size-cells = <0>;
-
- pm8058_gpio: gpio@150 {
- compatible = "qcom,pm8058-gpio",
- "qcom,ssbi-gpio";
- reg = <0x150>;
- interrupt-controller;
- #interrupt-cells = <2>;
- gpio-controller;
- gpio-ranges = <&pm8058_gpio 0 0 44>;
- #gpio-cells = <2>;
-
- };
-
- pm8058_mpps: mpps@50 {
- compatible = "qcom,pm8058-mpp",
- "qcom,ssbi-mpp";
- reg = <0x50>;
- gpio-controller;
- #gpio-cells = <2>;
- gpio-ranges = <&pm8058_mpps 0 0 12>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- pwrkey@1c {
- compatible = "qcom,pm8058-pwrkey";
- reg = <0x1c>;
- interrupt-parent = <&pm8058>;
- interrupts = <50 1>, <51 1>;
- debounce = <15625>;
- pull-up;
- };
-
- pm8058_keypad: keypad@148 {
- compatible = "qcom,pm8058-keypad";
- reg = <0x148>;
- interrupt-parent = <&pm8058>;
- interrupts = <74 1>, <75 1>;
- debounce = <15>;
- scan-delay = <32>;
- row-hold = <91500>;
- };
-
- pm8058_xoadc: xoadc@197 {
- compatible = "qcom,pm8058-adc";
- reg = <0x197>;
- interrupts-extended = <&pm8058 76 IRQ_TYPE_EDGE_RISING>;
- #address-cells = <2>;
- #size-cells = <0>;
- #io-channel-cells = <2>;
-
- vcoin: adc-channel@0 {
- reg = <0x00 0x00>;
- };
- vbat: adc-channel@1 {
- reg = <0x00 0x01>;
- };
- dcin: adc-channel@2 {
- reg = <0x00 0x02>;
- };
- ichg: adc-channel@3 {
- reg = <0x00 0x03>;
- };
- vph_pwr: adc-channel@4 {
- reg = <0x00 0x04>;
- };
- usb_vbus: adc-channel@a {
- reg = <0x00 0x0a>;
- };
- die_temp: adc-channel@b {
- reg = <0x00 0x0b>;
- };
- ref_625mv: adc-channel@c {
- reg = <0x00 0x0c>;
- };
- ref_1250mv: adc-channel@d {
- reg = <0x00 0x0d>;
- };
- ref_325mv: adc-channel@e {
- reg = <0x00 0x0e>;
- };
- ref_muxoff: adc-channel@f {
- reg = <0x00 0x0f>;
- };
- };
-
- rtc@1e8 {
- compatible = "qcom,pm8058-rtc";
- reg = <0x1e8>;
- interrupt-parent = <&pm8058>;
- interrupts = <39 1>;
- allow-set-time;
- };
-
- vibrator@4a {
- compatible = "qcom,pm8058-vib";
- reg = <0x4a>;
- };
-
- pm8058_led48: led@48 {
- compatible = "qcom,pm8058-keypad-led";
- reg = <0x48>;
- status = "disabled";
- };
-
- pm8058_led131: led@131 {
- compatible = "qcom,pm8058-led";
- reg = <0x131>;
- status = "disabled";
- };
-
- pm8058_led132: led@132 {
- compatible = "qcom,pm8058-led";
- reg = <0x132>;
- status = "disabled";
- };
-
- pm8058_led133: led@133 {
- compatible = "qcom,pm8058-led";
- reg = <0x133>;
- status = "disabled";
- };
-
- };
};
l2cc: clock-controller@2082000 {
--
2.39.2
