On Mon, Sep 25, 2023 at 1:26 PM Sunil V L <sunilvl@xxxxxxxxxxxxxxxx> wrote: > > Hi Anup, > > On Tue, Sep 12, 2023 at 11:19:25PM +0530, Anup Patel wrote: > > The RISC-V advanced interrupt architecture (AIA) specification defines > > advanced platform-level interrupt controller (APLIC) which has two modes > > of operation: 1) Direct mode and 2) MSI mode. > > (For more details, refer https://github.com/riscv/riscv-aia) > > > > In APLIC direct-mode, wired interrupts are forwared to CPUs (or HARTs) > > as a local external interrupt. > > > > We add a platform irqchip driver for the RISC-V APLIC direct-mode to > > support RISC-V platforms having only wired interrupts. > > > > Signed-off-by: Anup Patel <apatel@xxxxxxxxxxxxxxxx> > > --- > > drivers/irqchip/Kconfig | 5 + > > drivers/irqchip/Makefile | 1 + > > drivers/irqchip/irq-riscv-aplic-direct.c | 326 +++++++++++++++++++++++ > > drivers/irqchip/irq-riscv-aplic-main.c | 240 +++++++++++++++++ > > drivers/irqchip/irq-riscv-aplic-main.h | 45 ++++ > > include/linux/irqchip/riscv-aplic.h | 119 +++++++++ > > 6 files changed, 736 insertions(+) > > create mode 100644 drivers/irqchip/irq-riscv-aplic-direct.c > > create mode 100644 drivers/irqchip/irq-riscv-aplic-main.c > > create mode 100644 drivers/irqchip/irq-riscv-aplic-main.h > > create mode 100644 include/linux/irqchip/riscv-aplic.h > > > > diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig > > index a6aad78076a0..44c455084d09 100644 > > --- a/drivers/irqchip/Kconfig > > +++ b/drivers/irqchip/Kconfig > > @@ -545,6 +545,11 @@ config SIFIVE_PLIC > > select IRQ_DOMAIN_HIERARCHY > > select GENERIC_IRQ_EFFECTIVE_AFF_MASK if SMP > > > > +config RISCV_APLIC > > + bool > > + depends on RISCV > > + select IRQ_DOMAIN_HIERARCHY > > + > > config RISCV_IMSIC > > bool > > depends on RISCV > > diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile > > index abca445a3229..7f8289790ed8 100644 > > --- a/drivers/irqchip/Makefile > > +++ b/drivers/irqchip/Makefile > > @@ -95,6 +95,7 @@ obj-$(CONFIG_QCOM_MPM) += irq-qcom-mpm.o > > obj-$(CONFIG_CSKY_MPINTC) += irq-csky-mpintc.o > > obj-$(CONFIG_CSKY_APB_INTC) += irq-csky-apb-intc.o > > obj-$(CONFIG_RISCV_INTC) += irq-riscv-intc.o > > +obj-$(CONFIG_RISCV_APLIC) += irq-riscv-aplic-main.o irq-riscv-aplic-direct.o > > obj-$(CONFIG_RISCV_IMSIC) += irq-riscv-imsic-state.o irq-riscv-imsic-early.o irq-riscv-imsic-platform.o > > obj-$(CONFIG_SIFIVE_PLIC) += irq-sifive-plic.o > > obj-$(CONFIG_IMX_IRQSTEER) += irq-imx-irqsteer.o > > diff --git a/drivers/irqchip/irq-riscv-aplic-direct.c b/drivers/irqchip/irq-riscv-aplic-direct.c > > new file mode 100644 > > index 000000000000..e36d655a1490 > > --- /dev/null > > +++ b/drivers/irqchip/irq-riscv-aplic-direct.c > > @@ -0,0 +1,326 @@ > > +// SPDX-License-Identifier: GPL-2.0 > > +/* > > + * Copyright (C) 2021 Western Digital Corporation or its affiliates. > > + * Copyright (C) 2022 Ventana Micro Systems Inc. > > + */ > > + > > +#include <linux/bitops.h> > > +#include <linux/cpu.h> > > +#include <linux/interrupt.h> > > +#include <linux/irqchip.h> > > +#include <linux/irqchip/chained_irq.h> > > +#include <linux/irqchip/riscv-aplic.h> > > +#include <linux/module.h> > > +#include <linux/of_address.h> > > +#include <linux/printk.h> > > +#include <linux/smp.h> > > + > > +#include "irq-riscv-aplic-main.h" > > + > > +#define APLIC_DISABLE_IDELIVERY 0 > > +#define APLIC_ENABLE_IDELIVERY 1 > > +#define APLIC_DISABLE_ITHRESHOLD 1 > > +#define APLIC_ENABLE_ITHRESHOLD 0 > > + > > +struct aplic_direct { > > + struct aplic_priv priv; > > + struct irq_domain *irqdomain; > > + struct cpumask lmask; > > +}; > > + > > +struct aplic_idc { > > + unsigned int hart_index; > > + void __iomem *regs; > > + struct aplic_direct *direct; > > +}; > > + > > +static unsigned int aplic_direct_parent_irq; > > +static DEFINE_PER_CPU(struct aplic_idc, aplic_idcs); > > + > > +static void aplic_direct_irq_eoi(struct irq_data *d) > > +{ > > + /* > > + * The fasteoi_handler requires irq_eoi() callback hence > > + * provide a dummy handler. > > + */ > > +} > > + > > +#ifdef CONFIG_SMP > > +static int aplic_direct_set_affinity(struct irq_data *d, > > + const struct cpumask *mask_val, bool force) > > +{ > > + struct aplic_priv *priv = irq_data_get_irq_chip_data(d); > > + struct aplic_direct *direct = > > + container_of(priv, struct aplic_direct, priv); > > + struct aplic_idc *idc; > > + unsigned int cpu, val; > > + struct cpumask amask; > > + void __iomem *target; > > + > > + cpumask_and(&amask, &direct->lmask, mask_val); > > + > > + if (force) > > + cpu = cpumask_first(&amask); > > + else > > + cpu = cpumask_any_and(&amask, cpu_online_mask); > > + > > + if (cpu >= nr_cpu_ids) > > + return -EINVAL; > > + > > + idc = per_cpu_ptr(&aplic_idcs, cpu); > > + target = priv->regs + APLIC_TARGET_BASE; > > + target += (d->hwirq - 1) * sizeof(u32); > > + val = idc->hart_index & APLIC_TARGET_HART_IDX_MASK; > > + val <<= APLIC_TARGET_HART_IDX_SHIFT; > > + val |= APLIC_DEFAULT_PRIORITY; > > + writel(val, target); > > + > > + irq_data_update_effective_affinity(d, cpumask_of(cpu)); > > + > > + return IRQ_SET_MASK_OK_DONE; > > +} > > +#endif > > + > > +static struct irq_chip aplic_direct_chip = { > > + .name = "APLIC-DIRECT", > > + .irq_mask = aplic_irq_mask, > > + .irq_unmask = aplic_irq_unmask, > > + .irq_set_type = aplic_irq_set_type, > > + .irq_eoi = aplic_direct_irq_eoi, > > +#ifdef CONFIG_SMP > > + .irq_set_affinity = aplic_direct_set_affinity, > > +#endif > > + .flags = IRQCHIP_SET_TYPE_MASKED | > > + IRQCHIP_SKIP_SET_WAKE | > > + IRQCHIP_MASK_ON_SUSPEND, > > +}; > > + > > +static int aplic_direct_irqdomain_translate(struct irq_domain *d, > > + struct irq_fwspec *fwspec, > > + unsigned long *hwirq, > > + unsigned int *type) > > +{ > > + struct aplic_priv *priv = d->host_data; > > + > > + return aplic_irqdomain_translate(fwspec, priv->gsi_base, > > + hwirq, type); > > +} > > + > > +static int aplic_direct_irqdomain_alloc(struct irq_domain *domain, > > + unsigned int virq, unsigned int nr_irqs, > > + void *arg) > > +{ > > + int i, ret; > > + unsigned int type; > > + irq_hw_number_t hwirq; > > + struct irq_fwspec *fwspec = arg; > > + struct aplic_priv *priv = domain->host_data; > > + struct aplic_direct *direct = > > + container_of(priv, struct aplic_direct, priv); > > + > > + ret = aplic_irqdomain_translate(fwspec, priv->gsi_base, > > + &hwirq, &type); > > + if (ret) > > + return ret; > > + > > + for (i = 0; i < nr_irqs; i++) { > > + irq_domain_set_info(domain, virq + i, hwirq + i, > > + &aplic_direct_chip, priv, > > + handle_fasteoi_irq, NULL, NULL); > > + irq_set_affinity(virq + i, &direct->lmask); > > + /* See the reason described in aplic_msi_irqdomain_alloc() */ > > + irq_set_status_flags(virq + i, IRQ_DISABLE_UNLAZY); > > + } > > + > > + return 0; > > +} > > + > > +static const struct irq_domain_ops aplic_direct_irqdomain_ops = { > > + .translate = aplic_direct_irqdomain_translate, > > + .alloc = aplic_direct_irqdomain_alloc, > > + .free = irq_domain_free_irqs_top, > > +}; > > + > > +/* > > + * To handle an APLIC direct interrupts, we just read the CLAIMI register > > + * which will return highest priority pending interrupt and clear the > > + * pending bit of the interrupt. This process is repeated until CLAIMI > > + * register return zero value. > > + */ > > +static void aplic_direct_handle_irq(struct irq_desc *desc) > > +{ > > + struct aplic_idc *idc = this_cpu_ptr(&aplic_idcs); > > + struct irq_chip *chip = irq_desc_get_chip(desc); > > + struct irq_domain *irqdomain = idc->direct->irqdomain; > > + irq_hw_number_t hw_irq; > > + int irq; > > + > > + chained_irq_enter(chip, desc); > > + > > + while ((hw_irq = readl(idc->regs + APLIC_IDC_CLAIMI))) { > > + hw_irq = hw_irq >> APLIC_IDC_TOPI_ID_SHIFT; > > + irq = irq_find_mapping(irqdomain, hw_irq); > > + > > + if (unlikely(irq <= 0)) > > + dev_warn_ratelimited(idc->direct->priv.dev, > > + "hw_irq %lu mapping not found\n", > > + hw_irq); > > + else > > + generic_handle_irq(irq); > > + } > > + > > + chained_irq_exit(chip, desc); > > +} > > + > > +static void aplic_idc_set_delivery(struct aplic_idc *idc, bool en) > > +{ > > + u32 de = (en) ? APLIC_ENABLE_IDELIVERY : APLIC_DISABLE_IDELIVERY; > > + u32 th = (en) ? APLIC_ENABLE_ITHRESHOLD : APLIC_DISABLE_ITHRESHOLD; > > + > > + /* Priority must be less than threshold for interrupt triggering */ > > + writel(th, idc->regs + APLIC_IDC_ITHRESHOLD); > > + > > + /* Delivery must be set to 1 for interrupt triggering */ > > + writel(de, idc->regs + APLIC_IDC_IDELIVERY); > > +} > > + > > +static int aplic_direct_dying_cpu(unsigned int cpu) > > +{ > > + if (aplic_direct_parent_irq) > > + disable_percpu_irq(aplic_direct_parent_irq); > > + > > + return 0; > > +} > > + > > +static int aplic_direct_starting_cpu(unsigned int cpu) > > +{ > > + if (aplic_direct_parent_irq) > > + enable_percpu_irq(aplic_direct_parent_irq, > > + irq_get_trigger_type(aplic_direct_parent_irq)); > > + > > + return 0; > > +} > > + > > +int aplic_direct_setup(struct device *dev, void __iomem *regs) > > +{ > > + int i, j, rc, cpu, setup_count = 0; > > + struct fwnode_reference_args parent; > > + struct aplic_direct *direct; > > + struct aplic_priv *priv; > > + struct irq_domain *domain; > > + unsigned long hartid; > > + struct aplic_idc *idc; > > + u32 val; > > + > > + direct = kzalloc(sizeof(*direct), GFP_KERNEL); > > + if (!direct) > > + return -ENOMEM; > > + priv = &direct->priv; > > + > > + rc = aplic_setup_priv(priv, dev, regs); > > + if (rc) { > > + dev_err(dev, "failed to create APLIC context\n"); > > + kfree(direct); > > + return rc; > > + } > > + > > + /* Setup per-CPU IDC and target CPU mask */ > > + for (i = 0; i < priv->nr_idcs; i++) { > > + rc = fwnode_property_get_reference_args(dev->fwnode, > > + "interrupts-extended", "#interrupt-cells", > > + 0, i, &parent); > > + if (rc) { > > + dev_warn(dev, "parent irq for IDC%d not found\n", i); > > + continue; > > + } > > + > > + /* > > + * Skip interrupts other than external interrupts for > > + * current privilege level. > > + */ > > + if (parent.args[0] != RV_IRQ_EXT) > > + continue; > > + > > + rc = riscv_get_intc_hartid(parent.fwnode, &hartid); > > + if (rc) { > > + dev_warn(dev, "invalid hartid for IDC%d\n", i); > > + continue; > > + } > > + > > + cpu = riscv_hartid_to_cpuid(hartid); > > + if (cpu < 0) { > > + dev_warn(dev, "invalid cpuid for IDC%d\n", i); > > + continue; > > + } > > + > > + cpumask_set_cpu(cpu, &direct->lmask); > > + > > + idc = per_cpu_ptr(&aplic_idcs, cpu); > > + idc->hart_index = i; > > + idc->regs = priv->regs + APLIC_IDC_BASE + i * APLIC_IDC_SIZE; > > + idc->direct = direct; > > + > > + aplic_idc_set_delivery(idc, true); > > + > > + /* > > + * Boot cpu might not have APLIC hart_index = 0 so check > > + * and update target registers of all interrupts. > > + */ > > + if (cpu == smp_processor_id() && idc->hart_index) { > > + val = idc->hart_index & APLIC_TARGET_HART_IDX_MASK; > > + val <<= APLIC_TARGET_HART_IDX_SHIFT; > > + val |= APLIC_DEFAULT_PRIORITY; > > + for (j = 1; j <= priv->nr_irqs; j++) > > + writel(val, priv->regs + APLIC_TARGET_BASE + > > + (j - 1) * sizeof(u32)); > > + } > > + > > + setup_count++; > > + } > > + > > + /* Find parent domain and register chained handler */ > > + domain = irq_find_matching_fwnode(riscv_get_intc_hwnode(), > > + DOMAIN_BUS_ANY); > > + if (!aplic_direct_parent_irq && domain) { > > + aplic_direct_parent_irq = irq_create_mapping(domain, RV_IRQ_EXT); > > + if (aplic_direct_parent_irq) { > > + irq_set_chained_handler(aplic_direct_parent_irq, > > + aplic_direct_handle_irq); > > + > > + /* > > + * Setup CPUHP notifier to enable parent > > + * interrupt on all CPUs > > + */ > > + cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, > > + "irqchip/riscv/aplic:starting", > > + aplic_direct_starting_cpu, > > + aplic_direct_dying_cpu); > > + } > > + } > > + > > + /* Fail if we were not able to setup IDC for any CPU */ > > + if (!setup_count) { > > + kfree(direct); > > + return -ENODEV; > > + } > > + > > + /* Setup global config and interrupt delivery */ > > + aplic_init_hw_global(priv, false); > > + > > + /* Create irq domain instance for the APLIC */ > > + direct->irqdomain = irq_domain_create_linear(dev->fwnode, > > + priv->nr_irqs + 1, > > + &aplic_direct_irqdomain_ops, > > + priv); > > + if (!direct->irqdomain) { > > + dev_err(dev, "failed to create direct irq domain\n"); > > + kfree(direct); > > + return -ENOMEM; > > + } > > + > > + /* Advertise the interrupt controller */ > > + dev_info(dev, "%d interrupts directly connected to %d CPUs\n", > > + priv->nr_irqs, priv->nr_idcs); > > + > > + return 0; > > +} > > diff --git a/drivers/irqchip/irq-riscv-aplic-main.c b/drivers/irqchip/irq-riscv-aplic-main.c > > new file mode 100644 > > index 000000000000..d62a096774c4 > > --- /dev/null > > +++ b/drivers/irqchip/irq-riscv-aplic-main.c > > @@ -0,0 +1,240 @@ > > +// SPDX-License-Identifier: GPL-2.0 > > +/* > > + * Copyright (C) 2021 Western Digital Corporation or its affiliates. > > + * Copyright (C) 2022 Ventana Micro Systems Inc. > > + */ > > + > > +#include <linux/printk.h> > > +#include <linux/module.h> > > +#include <linux/platform_device.h> > > +#include <linux/irqchip/riscv-aplic.h> > > + > > +#include "irq-riscv-aplic-main.h" > > + > > +void aplic_irq_unmask(struct irq_data *d) > > +{ > > + struct aplic_priv *priv = irq_data_get_irq_chip_data(d); > > + > > + writel(d->hwirq, priv->regs + APLIC_SETIENUM); > > +} > > + > > +void aplic_irq_mask(struct irq_data *d) > > +{ > > + struct aplic_priv *priv = irq_data_get_irq_chip_data(d); > > + > > + writel(d->hwirq, priv->regs + APLIC_CLRIENUM); > > +} > > + > > +int aplic_irq_set_type(struct irq_data *d, unsigned int type) > > +{ > > + u32 val = 0; > > + void __iomem *sourcecfg; > > + struct aplic_priv *priv = irq_data_get_irq_chip_data(d); > > + > > + switch (type) { > > + case IRQ_TYPE_NONE: > > + val = APLIC_SOURCECFG_SM_INACTIVE; > > + break; > > + case IRQ_TYPE_LEVEL_LOW: > > + val = APLIC_SOURCECFG_SM_LEVEL_LOW; > > + break; > > + case IRQ_TYPE_LEVEL_HIGH: > > + val = APLIC_SOURCECFG_SM_LEVEL_HIGH; > > + break; > > + case IRQ_TYPE_EDGE_FALLING: > > + val = APLIC_SOURCECFG_SM_EDGE_FALL; > > + break; > > + case IRQ_TYPE_EDGE_RISING: > > + val = APLIC_SOURCECFG_SM_EDGE_RISE; > > + break; > > + default: > > + return -EINVAL; > > + } > > + > > + sourcecfg = priv->regs + APLIC_SOURCECFG_BASE; > > + sourcecfg += (d->hwirq - 1) * sizeof(u32); > > + writel(val, sourcecfg); > > + > > + return 0; > > +} > > + > > +int aplic_irqdomain_translate(struct irq_fwspec *fwspec, u32 gsi_base, > > + unsigned long *hwirq, unsigned int *type) > > +{ > > + if (WARN_ON(fwspec->param_count < 2)) > > + return -EINVAL; > > + if (WARN_ON(!fwspec->param[0])) > > + return -EINVAL; > > + > > + /* For DT, gsi_base is always zero. */ > > + *hwirq = fwspec->param[0] - gsi_base; > > + *type = fwspec->param[1] & IRQ_TYPE_SENSE_MASK; > > + > > + WARN_ON(*type == IRQ_TYPE_NONE); > > + > > + return 0; > > +} > > + > > +void aplic_init_hw_global(struct aplic_priv *priv, bool msi_mode) > > +{ > > + u32 val; > > +#ifdef CONFIG_RISCV_M_MODE > > + u32 valH; > > + > > + if (msi_mode) { > > + val = priv->msicfg.base_ppn; > > + valH = ((u64)priv->msicfg.base_ppn >> 32) & > > + APLIC_xMSICFGADDRH_BAPPN_MASK; > > + valH |= (priv->msicfg.lhxw & APLIC_xMSICFGADDRH_LHXW_MASK) > > + << APLIC_xMSICFGADDRH_LHXW_SHIFT; > > + valH |= (priv->msicfg.hhxw & APLIC_xMSICFGADDRH_HHXW_MASK) > > + << APLIC_xMSICFGADDRH_HHXW_SHIFT; > > + valH |= (priv->msicfg.lhxs & APLIC_xMSICFGADDRH_LHXS_MASK) > > + << APLIC_xMSICFGADDRH_LHXS_SHIFT; > > + valH |= (priv->msicfg.hhxs & APLIC_xMSICFGADDRH_HHXS_MASK) > > + << APLIC_xMSICFGADDRH_HHXS_SHIFT; > > + writel(val, priv->regs + APLIC_xMSICFGADDR); > > + writel(valH, priv->regs + APLIC_xMSICFGADDRH); > > + } > > +#endif > > + > > + /* Setup APLIC domaincfg register */ > > + val = readl(priv->regs + APLIC_DOMAINCFG); > > + val |= APLIC_DOMAINCFG_IE; > > + if (msi_mode) > > + val |= APLIC_DOMAINCFG_DM; > > + writel(val, priv->regs + APLIC_DOMAINCFG); > > + if (readl(priv->regs + APLIC_DOMAINCFG) != val) > > + dev_warn(priv->dev, "unable to write 0x%x in domaincfg\n", > > + val); > > +} > > + > > +static void aplic_init_hw_irqs(struct aplic_priv *priv) > > +{ > > + int i; > > + > > + /* Disable all interrupts */ > > + for (i = 0; i <= priv->nr_irqs; i += 32) > > + writel(-1U, priv->regs + APLIC_CLRIE_BASE + > > + (i / 32) * sizeof(u32)); > > + > > + /* Set interrupt type and default priority for all interrupts */ > > + for (i = 1; i <= priv->nr_irqs; i++) { > > + writel(0, priv->regs + APLIC_SOURCECFG_BASE + > > + (i - 1) * sizeof(u32)); > > + writel(APLIC_DEFAULT_PRIORITY, > > + priv->regs + APLIC_TARGET_BASE + > > + (i - 1) * sizeof(u32)); > > + } > > + > > + /* Clear APLIC domaincfg */ > > + writel(0, priv->regs + APLIC_DOMAINCFG); > > +} > > + > > +int aplic_setup_priv(struct aplic_priv *priv, struct device *dev, > > + void __iomem *regs) > > +{ > > + struct fwnode_reference_args parent; > > + int rc; > > + > > + /* Save device pointer and register base */ > > + priv->dev = dev; > > + priv->regs = regs; > > + > > + /* > > + * Find out GSI base number > > + * > > + * Note: DT does not define "riscv,gsi-base" property so GSI > > + * base is always zero for DT. > > + */ > > + rc = fwnode_property_read_u32_array(dev->fwnode, "riscv,gsi-base", > > + &priv->gsi_base, 1); > For DT, you can just initialize this to 0 without reading the property. Okay, I will update. > > > + if (rc) > > + priv->gsi_base = 0; > > + > > + /* Find out number of interrupt sources */ > > + rc = fwnode_property_read_u32_array(dev->fwnode, "riscv,num-sources", > > + &priv->nr_irqs, 1); > > + if (rc) { > > + dev_err(dev, "failed to get number of interrupt sources\n"); > > + return rc; > > + } > > + > > + /* Setup initial state APLIC interrupts */ > > + aplic_init_hw_irqs(priv); > > + > > + /* > > + * Find out number of IDCs based on parent interrupts > > + * > > + * If "msi-parent" property is present then we ignore the > > + * APLIC IDCs which forces the APLIC driver to use MSI mode. > > + */ > > + if (!fwnode_property_present(dev->fwnode, "msi-parent")) { > > + while (!fwnode_property_get_reference_args(dev->fwnode, > > + "interrupts-extended", "#interrupt-cells", > > + 0, priv->nr_idcs, &parent)) > > + priv->nr_idcs++; > > + } > > + > Can this finding nr_idcs be done after aplic_init_hw_irqs() above? Okay, I will update. > > > + return 0; > > +} > > + > > +static int aplic_probe(struct platform_device *pdev) > > +{ > > + struct device *dev = &pdev->dev; > > + struct resource *res; > > + void __iomem *regs; > > + int rc; > > + > > + /* Map the MMIO registers */ > > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > > + if (!res) { > > + dev_err(dev, "failed to get MMIO resource\n"); > > + return -EINVAL; > > + } > > + regs = devm_ioremap(&pdev->dev, res->start, resource_size(res)); > > + if (!regs) { > > + dev_err(dev, "failed map MMIO registers\n"); > > + return -ENOMEM; > > + } > > + > > + /* > > + * If msi-parent property is present then setup APLIC MSI mode > > + * otherwise setup APLIC direct mode. > > + */ > > + if (fwnode_property_present(dev->fwnode, "msi-parent")) > Can this check be based on nr_idcs instead of checking for msi-parent > again? nr_idcs are not available at this point. I will think of something else and maybe you can comment on v9 if it does not work for you. > > Thanks! > Sunil > > + rc = -ENODEV; > > + else > > + rc = aplic_direct_setup(dev, regs); > > + if (rc) { > > + dev_err(dev, "failed setup APLIC in %s mode\n", > > + fwnode_property_present(dev->fwnode, "msi-parent") ? > > + "MSI" : "direct"); > > + return rc; > > + } > > + > > + return 0; > > +} > > + > > +static const struct of_device_id aplic_match[] = { > > + { .compatible = "riscv,aplic" }, > > + {} > > +}; > > + > > +static struct platform_driver aplic_driver = { > > + .driver = { > > + .name = "riscv-aplic", > > + .of_match_table = aplic_match, > > + }, > > + .probe = aplic_probe, > > +}; > > + > > +static int __init aplic_init(void) > > +{ > > + /* > > + * Register APLIC driver as early as possible so that APLIC > > + * platform device is probed as soon as it is created. > > + */ > > + return platform_driver_register(&aplic_driver); > > +} > > +core_initcall(aplic_init); > > diff --git a/drivers/irqchip/irq-riscv-aplic-main.h b/drivers/irqchip/irq-riscv-aplic-main.h > > new file mode 100644 > > index 000000000000..474a04229334 > > --- /dev/null > > +++ b/drivers/irqchip/irq-riscv-aplic-main.h > > @@ -0,0 +1,45 @@ > > +/* SPDX-License-Identifier: GPL-2.0-only */ > > +/* > > + * Copyright (C) 2021 Western Digital Corporation or its affiliates. > > + * Copyright (C) 2022 Ventana Micro Systems Inc. > > + */ > > + > > +#ifndef _IRQ_RISCV_APLIC_MAIN_H > > +#define _IRQ_RISCV_APLIC_MAIN_H > > + > > +#include <linux/device.h> > > +#include <linux/io.h> > > +#include <linux/irq.h> > > +#include <linux/irqdomain.h> > > +#include <linux/fwnode.h> > > + > > +#define APLIC_DEFAULT_PRIORITY 1 > > + > > +struct aplic_msicfg { > > + phys_addr_t base_ppn; > > + u32 hhxs; > > + u32 hhxw; > > + u32 lhxs; > > + u32 lhxw; > > +}; > > + > > +struct aplic_priv { > > + struct device *dev; > > + u32 gsi_base; > > + u32 nr_irqs; > > + u32 nr_idcs; > > + void __iomem *regs; > > + struct aplic_msicfg msicfg; > > +}; > > + > > +void aplic_irq_unmask(struct irq_data *d); > > +void aplic_irq_mask(struct irq_data *d); > > +int aplic_irq_set_type(struct irq_data *d, unsigned int type); > > +int aplic_irqdomain_translate(struct irq_fwspec *fwspec, u32 gsi_base, > > + unsigned long *hwirq, unsigned int *type); > > +void aplic_init_hw_global(struct aplic_priv *priv, bool msi_mode); > > +int aplic_setup_priv(struct aplic_priv *priv, struct device *dev, > > + void __iomem *regs); > > +int aplic_direct_setup(struct device *dev, void __iomem *regs); > > + > > +#endif > > diff --git a/include/linux/irqchip/riscv-aplic.h b/include/linux/irqchip/riscv-aplic.h > > new file mode 100644 > > index 000000000000..97e198ea0109 > > --- /dev/null > > +++ b/include/linux/irqchip/riscv-aplic.h > > @@ -0,0 +1,119 @@ > > +/* SPDX-License-Identifier: GPL-2.0-only */ > > +/* > > + * Copyright (C) 2021 Western Digital Corporation or its affiliates. > > + * Copyright (C) 2022 Ventana Micro Systems Inc. > > + */ > > +#ifndef __LINUX_IRQCHIP_RISCV_APLIC_H > > +#define __LINUX_IRQCHIP_RISCV_APLIC_H > > + > > +#include <linux/bitops.h> > > + > > +#define APLIC_MAX_IDC BIT(14) > > +#define APLIC_MAX_SOURCE 1024 > > + > > +#define APLIC_DOMAINCFG 0x0000 > > +#define APLIC_DOMAINCFG_RDONLY 0x80000000 > > +#define APLIC_DOMAINCFG_IE BIT(8) > > +#define APLIC_DOMAINCFG_DM BIT(2) > > +#define APLIC_DOMAINCFG_BE BIT(0) > > + > > +#define APLIC_SOURCECFG_BASE 0x0004 > > +#define APLIC_SOURCECFG_D BIT(10) > > +#define APLIC_SOURCECFG_CHILDIDX_MASK 0x000003ff > > +#define APLIC_SOURCECFG_SM_MASK 0x00000007 > > +#define APLIC_SOURCECFG_SM_INACTIVE 0x0 > > +#define APLIC_SOURCECFG_SM_DETACH 0x1 > > +#define APLIC_SOURCECFG_SM_EDGE_RISE 0x4 > > +#define APLIC_SOURCECFG_SM_EDGE_FALL 0x5 > > +#define APLIC_SOURCECFG_SM_LEVEL_HIGH 0x6 > > +#define APLIC_SOURCECFG_SM_LEVEL_LOW 0x7 > > + > > +#define APLIC_MMSICFGADDR 0x1bc0 > > +#define APLIC_MMSICFGADDRH 0x1bc4 > > +#define APLIC_SMSICFGADDR 0x1bc8 > > +#define APLIC_SMSICFGADDRH 0x1bcc > > + > > +#ifdef CONFIG_RISCV_M_MODE > > +#define APLIC_xMSICFGADDR APLIC_MMSICFGADDR > > +#define APLIC_xMSICFGADDRH APLIC_MMSICFGADDRH > > +#else > > +#define APLIC_xMSICFGADDR APLIC_SMSICFGADDR > > +#define APLIC_xMSICFGADDRH APLIC_SMSICFGADDRH > > +#endif > > + > > +#define APLIC_xMSICFGADDRH_L BIT(31) > > +#define APLIC_xMSICFGADDRH_HHXS_MASK 0x1f > > +#define APLIC_xMSICFGADDRH_HHXS_SHIFT 24 > > +#define APLIC_xMSICFGADDRH_LHXS_MASK 0x7 > > +#define APLIC_xMSICFGADDRH_LHXS_SHIFT 20 > > +#define APLIC_xMSICFGADDRH_HHXW_MASK 0x7 > > +#define APLIC_xMSICFGADDRH_HHXW_SHIFT 16 > > +#define APLIC_xMSICFGADDRH_LHXW_MASK 0xf > > +#define APLIC_xMSICFGADDRH_LHXW_SHIFT 12 > > +#define APLIC_xMSICFGADDRH_BAPPN_MASK 0xfff > > + > > +#define APLIC_xMSICFGADDR_PPN_SHIFT 12 > > + > > +#define APLIC_xMSICFGADDR_PPN_HART(__lhxs) \ > > + (BIT(__lhxs) - 1) > > + > > +#define APLIC_xMSICFGADDR_PPN_LHX_MASK(__lhxw) \ > > + (BIT(__lhxw) - 1) > > +#define APLIC_xMSICFGADDR_PPN_LHX_SHIFT(__lhxs) \ > > + ((__lhxs)) > > +#define APLIC_xMSICFGADDR_PPN_LHX(__lhxw, __lhxs) \ > > + (APLIC_xMSICFGADDR_PPN_LHX_MASK(__lhxw) << \ > > + APLIC_xMSICFGADDR_PPN_LHX_SHIFT(__lhxs)) > > + > > +#define APLIC_xMSICFGADDR_PPN_HHX_MASK(__hhxw) \ > > + (BIT(__hhxw) - 1) > > +#define APLIC_xMSICFGADDR_PPN_HHX_SHIFT(__hhxs) \ > > + ((__hhxs) + APLIC_xMSICFGADDR_PPN_SHIFT) > > +#define APLIC_xMSICFGADDR_PPN_HHX(__hhxw, __hhxs) \ > > + (APLIC_xMSICFGADDR_PPN_HHX_MASK(__hhxw) << \ > > + APLIC_xMSICFGADDR_PPN_HHX_SHIFT(__hhxs)) > > + > > +#define APLIC_IRQBITS_PER_REG 32 > > + > > +#define APLIC_SETIP_BASE 0x1c00 > > +#define APLIC_SETIPNUM 0x1cdc > > + > > +#define APLIC_CLRIP_BASE 0x1d00 > > +#define APLIC_CLRIPNUM 0x1ddc > > + > > +#define APLIC_SETIE_BASE 0x1e00 > > +#define APLIC_SETIENUM 0x1edc > > + > > +#define APLIC_CLRIE_BASE 0x1f00 > > +#define APLIC_CLRIENUM 0x1fdc > > + > > +#define APLIC_SETIPNUM_LE 0x2000 > > +#define APLIC_SETIPNUM_BE 0x2004 > > + > > +#define APLIC_GENMSI 0x3000 > > + > > +#define APLIC_TARGET_BASE 0x3004 > > +#define APLIC_TARGET_HART_IDX_SHIFT 18 > > +#define APLIC_TARGET_HART_IDX_MASK 0x3fff > > +#define APLIC_TARGET_GUEST_IDX_SHIFT 12 > > +#define APLIC_TARGET_GUEST_IDX_MASK 0x3f > > +#define APLIC_TARGET_IPRIO_MASK 0xff > > +#define APLIC_TARGET_EIID_MASK 0x7ff > > + > > +#define APLIC_IDC_BASE 0x4000 > > +#define APLIC_IDC_SIZE 32 > > + > > +#define APLIC_IDC_IDELIVERY 0x00 > > + > > +#define APLIC_IDC_IFORCE 0x04 > > + > > +#define APLIC_IDC_ITHRESHOLD 0x08 > > + > > +#define APLIC_IDC_TOPI 0x18 > > +#define APLIC_IDC_TOPI_ID_SHIFT 16 > > +#define APLIC_IDC_TOPI_ID_MASK 0x3ff > > +#define APLIC_IDC_TOPI_PRIO_MASK 0xff > > + > > +#define APLIC_IDC_CLAIMI 0x1c > > + > > +#endif > > -- > > 2.34.1 > > Regards, Anup
