There are totally 2 instances of watchdog module in MCU domain.
These instances are coupled with the MCU domain R5F instances.
Disabling them as they are not used by Linux.
Signed-off-by: Keerthy <j-keerthy@xxxxxx>
---
Changes:
* Corrected subject.
.../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi | 24 +++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
index 4b29418a6076..83377c47e709 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
@@ -669,4 +669,28 @@
ti,esm-pins = <63>;
bootph-pre-ram;
};
+
+ /*
+ * The 2 RTI instances are couple with MCU R5Fs so keeping them
+ * disabled as these will be used by their respective firmware
+ */
+ mcu_watchdog0: watchdog@40600000 {
+ compatible = "ti,j7-rti-wdt";
+ reg = <0x00 0x40600000 0x00 0x100>;
+ clocks = <&k3_clks 295 1>;
+ power-domains = <&k3_pds 295 TI_SCI_PD_EXCLUSIVE>;
+ assigned-clocks = <&k3_clks 295 1>;
+ assigned-clock-parents = <&k3_clks 295 5>;
+ status = "disabled";
+ };
+
+ mcu_watchdog1: watchdog@40610000 {
+ compatible = "ti,j7-rti-wdt";
+ reg = <0x00 0x40610000 0x00 0x100>;
+ clocks = <&k3_clks 296 1>;
+ power-domains = <&k3_pds 296 TI_SCI_PD_EXCLUSIVE>;
+ assigned-clocks = <&k3_clks 296 1>;
+ assigned-clock-parents = <&k3_clks 296 5>;
+ status = "disabled";
+ };
};
--
2.17.1
